Acasă Explorează Ajutor
Înregistrare Autentificare
lqb
/
rt-thread
oglindă de https://gitee.com/rtthread/rt-thread.git
1
0
Bifurcare 0
Fisiere Probleme 0 Wiki
Ramură: master
Ramuri Etichete
rt-thread
/
bsp
/
stm32
/
stm32l4r5-st-nucleo
/
board
/
Kconfig

Kconfig 14 KB
Permalink Istoric Crud

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368 
  1. menu "Hardware Drivers Config"
    2. 

  2. 

  3.     menu "Onboard Peripheral Drivers"
    4. 

  4.         config BSP_USING_STLINK_TO_USART
    5. 

  5.             bool "Enable STLINK TO USART (lpuart1)"
    6. 

  6.             select BSP_USING_UART
    7. 

  7.             select BSP_USING_LPUART1
    8. 

  8.             default y
    9. 

  9.     endmenu
    10. 

  10. 

  11.     menu "On-chip Peripheral Drivers"
    12. 

  12. 

  13.         config BSP_USING_GPIO
    14. 

  14.             bool "Enable GPIO"
    15. 

  15.             select RT_USING_PIN
    16. 

  16.             default y
    17. 

  17. 

  18.         menuconfig BSP_USING_UART
    19. 

  19.             bool "Enable UART"
    20. 

  20.             default y
    21. 

  21.             select RT_USING_SERIAL
    22. 

  22.             if BSP_USING_UART
    23. 

  23.                 config BSP_STM32_UART_V1_TX_TIMEOUT
    24. 

  24.                     int "UART TX timeout"
    25. 

  25.                     default 2000
    26. 

  26.                     depends on RT_USING_SERIAL_V1
    27. 

  27.                     
    28. 

  28.                 config RT_SERIAL_USING_DMA
    29. 

  29.                     bool "Enable uart using DMA"
    30. 

  30.                     default n
    31. 

  31.                 config BSP_USING_LPUART1
    32. 

  32.                     bool "Enable LPUART1"
    33. 

  33.                     default y
    34. 

  34.                 config BSP_LPUART1_RX_USING_DMA
    35. 

  35.                     bool "Enable LPUART1 RX DMA"
    36. 

  36.                     depends on BSP_USING_LPUART1 && RT_SERIAL_USING_DMA
    37. 

  37.                     default n
    38. 

  38.                 
    39. 

  39.                 menuconfig BSP_USING_UART1
    40. 

  40.                     bool "Enable UART1"
    41. 

  41.                     default n
    42. 

  42.                     if BSP_USING_UART1
    43. 

  43.                         config BSP_UART1_RX_USING_DMA
    44. 

  44.                             bool "Enable UART1 RX DMA"
    45. 

  45.                             depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
    46. 

  46.                             default n
    47. 

  47.     
    48. 

  48.                         config BSP_UART1_TX_USING_DMA
    49. 

  49.                             bool "Enable UART1 TX DMA"
    50. 

  50.                             depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
    51. 

  51.                             default n
    52. 

  52.     
    53. 

  53.                         config BSP_UART1_RX_BUFSIZE
    54. 

  54.                             int "Set UART1 RX buffer size"
    55. 

  55.                             range 64 65535
    56. 

  56.                             depends on RT_USING_SERIAL_V2
    57. 

  57.                             default 256
    58. 

  58.     
    59. 

  59.                         config BSP_UART1_TX_BUFSIZE
    60. 

  60.                             int "Set UART1 TX buffer size"
    61. 

  61.                             range 0 65535
    62. 

  62.                             depends on RT_USING_SERIAL_V2
    63. 

  63.                             default 256
    64. 

  64.     
    65. 

  65.                         config BSP_UART1_DMA_PING_BUFSIZE
    66. 

  66.                             int "Set UART1 RX DMA ping-pong buffer size"
    67. 

  67.                             range 32 65535
    68. 

  68.                             depends on RT_USING_SERIAL_V2 && BSP_UART1_RX_USING_DMA
    69. 

  69.                             default 64    
    70. 

  70.                     endif
    71. 

  71.     
    72. 

  72.                 menuconfig BSP_USING_UART2
    73. 

  73.                     bool "Enable UART2"
    74. 

  74.                     default n
    75. 

  75.                     if BSP_USING_UART2
    76. 

  76.                         config BSP_UART2_RX_USING_DMA
    77. 

  77.                             bool "Enable UART2 RX DMA"
    78. 

  78.                             depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA
    79. 

  79.                             default n
    80. 

  80.     
    81. 

  81.                         config BSP_UART2_TX_USING_DMA
    82. 

  82.                             bool "Enable UART2 TX DMA"
    83. 

  83.                             depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA
    84. 

  84.                             default n
    85. 

  85.     
    86. 

  86.                         config BSP_UART2_RX_BUFSIZE
    87. 

  87.                             int "Set UART2 RX buffer size"
    88. 

  88.                             range 64 65535
    89. 

  89.                             depends on RT_USING_SERIAL_V2
    90. 

  90.                             default 256
    91. 

  91.     
    92. 

  92.                         config BSP_UART2_TX_BUFSIZE
    93. 

  93.                             int "Set UART2 TX buffer size"
    94. 

  94.                             range 0 65535
    95. 

  95.                             depends on RT_USING_SERIAL_V2
    96. 

  96.                             default 256
    97. 

  97.     
    98. 

  98.                         config BSP_UART2_DMA_PING_BUFSIZE
    99. 

  99.                             int "Set UART2 RX DMA ping-pong buffer size"
    100. 

  100.                             range 32 65535
    101. 

  101.                             depends on RT_USING_SERIAL_V2 && BSP_UART2_RX_USING_DMA
    102. 

  102.                             default 64                        
    103. 

  103.                     endif
    104. 

  104.     
    105. 

  105.                 menuconfig BSP_USING_UART3
    106. 

  106.                     bool "Enable UART3"
    107. 

  107.                     default n
    108. 

  108.                     if BSP_USING_UART3
    109. 

  109.                         config BSP_UART3_RX_USING_DMA
    110. 

  110.                             bool "Enable UART3 RX DMA"
    111. 

  111.                             depends on BSP_USING_UART3 && RT_SERIAL_USING_DMA
    112. 

  112.                             default n
    113. 

  113.     
    114. 

  114.                         config BSP_UART3_TX_USING_DMA
    115. 

  115.                             bool "Enable UART3 TX DMA"
    116. 

  116.                             depends on BSP_USING_UART3 && RT_SERIAL_USING_DMA
    117. 

  117.                             default n
    118. 

  118.                             
    119. 

  119.                         config BSP_UART3_RX_BUFSIZE
    120. 

  120.                             int "Set UART3 RX buffer size"
    121. 

  121.                             range 64 65535
    122. 

  122.                             depends on RT_USING_SERIAL_V2
    123. 

  123.                             default 256
    124. 

  124.     
    125. 

  125.                         config BSP_UART3_TX_BUFSIZE
    126. 

  126.                             int "Set UART3 TX buffer size"
    127. 

  127.                             range 0 65535
    128. 

  128.                             depends on RT_USING_SERIAL_V2
    129. 

  129.                             default 256
    130. 

  130.     
    131. 

  131.                         config BSP_UART3_DMA_PING_BUFSIZE
    132. 

  132.                             int "Set UART3 RX DMA ping-pong buffer size"
    133. 

  133.                             range 32 65535
    134. 

  134.                             depends on RT_USING_SERIAL_V2 && BSP_UART3_RX_USING_DMA
    135. 

  135.                             default 64    
    136. 

  136.                     endif
    137. 

  137.     
    138. 

  138.                 menuconfig BSP_USING_UART4
    139. 

  139.                     bool "Enable UART4"
    140. 

  140.                     default n
    141. 

  141.                     if BSP_USING_UART4
    142. 

  142.                         config BSP_UART4_RX_USING_DMA
    143. 

  143.                             bool "Enable UART4 RX DMA"
    144. 

  144.                             select RT_SERIAL_USING_DMA
    145. 

  145.                             default n
    146. 

  146.     
    147. 

  147.                         config BSP_UART4_TX_USING_DMA
    148. 

  148.                             bool "Enable UART4 TX DMA"
    149. 

  149.                             select RT_SERIAL_USING_DMA
    150. 

  150.                             default n
    151. 

  151.     
    152. 

  152.                         config BSP_UART4_RX_BUFSIZE
    153. 

  153.                             int "Set UART4 RX buffer size"
    154. 

  154.                             range 64 65535
    155. 

  155.                             depends on BSP_USING_UART4
    156. 

  156.                             default 256
    157. 

  157.     
    158. 

  158.                         config BSP_UART4_TX_BUFSIZE
    159. 

  159.                             int "Set UART4 TX buffer size"
    160. 

  160.                             range 0 65535
    161. 

  161.                             depends on BSP_USING_UART4
    162. 

  162.                             default 0
    163. 

  163.     
    164. 

  164.                         config BSP_UART4_DMA_PING_BUFSIZE
    165. 

  165.                             int "Set UART4 RX DMA ping-pong buffer size"
    166. 

  166.                             range 32 65535
    167. 

  167.                             depends on RT_USING_SERIAL_V2 && BSP_UART4_RX_USING_DMA
    168. 

  168.                             default 64                        
    169. 

  169.                     endif
    170. 

  170.     
    171. 

  171.                 menuconfig BSP_USING_UART5
    172. 

  172.                     bool "Enable UART5"
    173. 

  173.                     default n
    174. 

  174.                     if BSP_USING_UART5
    175. 

  175.                         config BSP_UART5_RX_USING_DMA
    176. 

  176.                             bool "Enable UART5 RX DMA"
    177. 

  177.                             select RT_SERIAL_USING_DMA
    178. 

  178.                             default n
    179. 

  179.     
    180. 

  180.                         config BSP_UART5_TX_USING_DMA
    181. 

  181.                             bool "Enable UART5 TX DMA"
    182. 

  182.                             select RT_SERIAL_USING_DMA
    183. 

  183.                             default n
    184. 

  184.     
    185. 

  185.                         config BSP_UART5_RX_BUFSIZE
    186. 

  186.                             int "Set UART5 RX buffer size"
    187. 

  187.                             range 64 65535
    188. 

  188.                             depends on BSP_USING_UART5
    189. 

  189.                             default 256
    190. 

  190.     
    191. 

  191.                         config BSP_UART5_TX_BUFSIZE
    192. 

  192.                             int "Set UART5 TX buffer size"
    193. 

  193.                             range 0 65535
    194. 

  194.                             depends on BSP_USING_UART5
    195. 

  195.                             default 0
    196. 

  196.     
    197. 

  197.                         config BSP_UART5_DMA_PING_BUFSIZE
    198. 

  198.                             int "Set UART5 RX DMA ping-pong buffer size"
    199. 

  199.                             range 32 65535
    200. 

  200.                             depends on RT_USING_SERIAL_V2 && BSP_UART5_RX_USING_DMA
    201. 

  201.                             default 64                        
    202. 

  202.                     endif
    203. 

  203.             endif
    204. 

  204. 

  205.         config BSP_USING_ON_CHIP_FLASH
    206. 

  206.             bool "Enable on-chip FLASH"
    207. 

  207.             default n
    208. 

  208. 

  209.         config BSP_USING_USBD
    210. 

  210.             bool "Enable OTGFS as USB device"
    211. 

  211.             select RT_USING_USB_DEVICE
    212. 

  212.             default n
    213. 

  213. 

  214.         config BSP_USING_WDT
    215. 

  215.             bool "Enable Watchdog Timer"
    216. 

  216.             select RT_USING_WDT
    217. 

  217.             default n
    218. 

  218. 

  219.         menuconfig BSP_USING_ADC
    220. 

  220.             bool "Enable ADC"
    221. 

  221.             default n
    222. 

  222.             select RT_USING_ADC
    223. 

  223.             if BSP_USING_ADC
    224. 

  224.                 config BSP_USING_ADC1
    225. 

  225.                     bool "Enable ADC1"
    226. 

  226.                     default n
    227. 

  227. 

  228.             endif
    229. 

  229. 

  230.         menuconfig BSP_USING_ONCHIP_RTC
    231. 

  231.             bool "Enable RTC"
    232. 

  232.             select RT_USING_RTC
    233. 

  233.             default n
    234. 

  234.             if BSP_USING_ONCHIP_RTC
    235. 

  235.                 choice
    236. 

  236.                     prompt "Select clock source"
    237. 

  237.                     default BSP_RTC_USING_LSE
    238. 

  238.                     config BSP_RTC_USING_LSE
    239. 

  239.                         bool "RTC USING LSE"
    240. 

  240.                     config BSP_RTC_USING_LSI
    241. 

  241.                         bool "RTC USING LSI"
    242. 

  242.                 endchoice
    243. 

  243.             endif
    244. 

  244. 

  245.         menuconfig BSP_USING_SPI
    246. 

  246.             bool "Enable SPI BUS"
    247. 

  247.             default n
    248. 

  248.             select RT_USING_SPI
    249. 

  249.             if BSP_USING_SPI
    250. 

  250.                 config BSP_USING_SPI1
    251. 

  251.                     bool "Enable SPI1 BUS"
    252. 

  252.                     default n
    253. 

  253.                 config BSP_SPI1_TX_USING_DMA
    254. 

  254.                     bool "Enable SPI1 TX DMA"
    255. 

  255.                     depends on BSP_USING_SPI1
    256. 

  256.                     default n
    257. 

  257.                 config BSP_SPI1_RX_USING_DMA
    258. 

  258.                     bool "Enable SPI1 RX DMA"
    259. 

  259.                     depends on BSP_USING_SPI1
    260. 

  260.                     select BSP_SPI1_TX_USING_DMA
    261. 

  261.                     default n
    262. 

  262.                 config BSP_USING_SPI2
    263. 

  263.                     bool "Enable SPI2 BUS"
    264. 

  264.                     default n
    265. 

  265.                 config BSP_SPI2_TX_USING_DMA
    266. 

  266.                     bool "Enable SPI2 TX DMA"
    267. 

  267.                     depends on BSP_USING_SPI2
    268. 

  268.                     default n
    269. 

  269.                 config BSP_SPI2_RX_USING_DMA
    270. 

  270.                     bool "Enable SPI2 RX DMA"
    271. 

  271.                     depends on BSP_USING_SPI2
    272. 

  272.                     select BSP_SPI2_TX_USING_DMA
    273. 

  273.                     default n
    274. 

  274.                 config BSP_USING_SPI3
    275. 

  275.                     bool "Enable SPI3 BUS"
    276. 

  276.                     default n
    277. 

  277.                 config BSP_SPI3_TX_USING_DMA
    278. 

  278.                     bool "Enable SPI3 TX DMA"
    279. 

  279.                     depends on BSP_USING_SPI3
    280. 

  280.                     default n
    281. 

  281.                 config BSP_SPI3_RX_USING_DMA
    282. 

  282.                     bool "Enable SPI3 RX DMA"
    283. 

  283.                     depends on BSP_USING_SPI3
    284. 

  284.                     select BSP_SPI3_TX_USING_DMA
    285. 

  285.                     default n
    286. 

  286.             endif
    287. 

  287. 

  288.         menuconfig BSP_USING_I2C
    289. 

  289.             bool "Enable using I2C BUS (software simulation)"
    290. 

  290.             default n
    291. 

  291.             select RT_USING_I2C
    292. 

  292.             select RT_USING_I2C_BITOPS
    293. 

  293.             select RT_USING_PIN
    294. 

  294.             if BSP_USING_I2C
    295. 

  295.                 menuconfig BSP_USING_I2C1
    296. 

  296.                     bool "Enable I2C1 BUS (software simulation)"
    297. 

  297.                     default n
    298. 

  298.                     if BSP_USING_I2C1
    299. 

  299.                         config BSP_I2C1_SCL_PIN
    300. 

  300.                             int "i2c1 scl pin number"
    301. 

  301.                             range 1 144
    302. 

  302.                             default 100
    303. 

  303.                         config BSP_I2C1_SDA_PIN
    304. 

  304.                             int "I2C1 sda pin number"
    305. 

  305.                             range 1 144
    306. 

  306.                             default 101
    307. 

  307.                     endif
    308. 

  308.                 menuconfig BSP_USING_I2C2
    309. 

  309.                     bool "Enable I2C2 BUS (software simulation)"
    310. 

  310.                     default n
    311. 

  311.                     if BSP_USING_I2C2
    312. 

  312.                         config BSP_I2C2_SCL_PIN
    313. 

  313.                             int "i2c2 scl pin number"
    314. 

  314.                             range 1 144
    315. 

  315.                             default 10
    316. 

  316.                         config BSP_I2C2_SDA_PIN
    317. 

  317.                             int "I2C2 sda pin number"
    318. 

  318.                             range 1 144
    319. 

  319.                             default 11
    320. 

  320.                     endif
    321. 

  321.             endif
    322. 

  322. 

  323.         menuconfig BSP_USING_TIM
    324. 

  324.             bool "Enable timer"
    325. 

  325.             default n
    326. 

  326.             select RT_USING_HWTIMER
    327. 

  327.             if BSP_USING_TIM
    328. 

  328.                 config BSP_USING_TIM1
    329. 

  329.                     bool "Enable TIM1"
    330. 

  330.                     default n
    331. 

  331.                 config BSP_USING_TIM2
    332. 

  332.                     bool "Enable TIM2"
    333. 

  333.                     default n
    334. 

  334.                 config BSP_USING_TIM3
    335. 

  335.                     bool "Enable TIM3"
    336. 

  336.                     default n
    337. 

  337.             endif
    338. 

  338. 

  339.         menuconfig BSP_USING_PWM
    340. 

  340.             bool "Using PWM"
    341. 

  341.             default n
    342. 

  342.             select RT_USING_PWM
    343. 

  343.             if BSP_USING_PWM
    344. 

  344.                 config BSP_USING_PWM1
    345. 

  345.                     bool "Using PWM1"
    346. 

  346.                     default n
    347. 

  347.                     if BSP_USING_PWM1
    348. 

  348.                         config BSP_USING_PWM1_CH1
    349. 

  349.                             bool "Enable Channel 1 (PA8)"
    350. 

  350.                             default n
    351. 

  351.                         config BSP_USING_PWM1_CH2
    352. 

  352.                             bool "Enable Channel 2 (PA9)"
    353. 

  353.                             default n
    354. 

  354.                         config BSP_USING_PWM1_CH3
    355. 

  355.                             bool "Enable Channel 3 (PA10)"
    356. 

  356.                             default n
    357. 

  357.                         config BSP_USING_PWM1_CH4
    358. 

  358.                             bool "Enable Channel 4 (PA11)"
    359. 

  359.                             default n
    360. 

  360.                     endif
    361. 

  361.             endif
    362. 

  362.     endmenu
    363. 

  363. 

  364.     menu "Board extended module Drivers"
    365. 

  365. 

  366.     endmenu
    367. 

  367. 

  368. endmenu
    369.