123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187 |
- /*
- * Copyright (c) 2006-2021, RT-Thread Development Team
- *
- * SPDX-License-Identifier: Apache-2.0
- *
- * Change Logs:
- * Date Author Notes
- * 2013-07-20 Bernard first version
- */
- #include <rtthread.h>
- #include <rthw.h>
- #include <board.h>
- #include "armv7.h"
- #include "gic.h"
- extern struct rt_thread *rt_current_thread;
- #if defined(RT_USING_FINSH) && defined(MSH_USING_BUILT_IN_COMMANDS)
- extern long list_thread(void);
- #endif
- /**
- * this function will show registers of CPU
- *
- * @param regs the registers point
- */
- void rt_hw_show_register(struct rt_hw_exp_stack *regs)
- {
- rt_kprintf("Execption:\n");
- rt_kprintf("r00:0x%08x r01:0x%08x r02:0x%08x r03:0x%08x\n", regs->r0, regs->r1, regs->r2, regs->r3);
- rt_kprintf("r04:0x%08x r05:0x%08x r06:0x%08x r07:0x%08x\n", regs->r4, regs->r5, regs->r6, regs->r7);
- rt_kprintf("r08:0x%08x r09:0x%08x r10:0x%08x\n", regs->r8, regs->r9, regs->r10);
- rt_kprintf("fp :0x%08x ip :0x%08x\n", regs->fp, regs->ip);
- rt_kprintf("sp :0x%08x lr :0x%08x pc :0x%08x\n", regs->sp, regs->lr, regs->pc);
- rt_kprintf("cpsr:0x%08x\n", regs->cpsr);
- }
- /**
- * When comes across an instruction which it cannot handle,
- * it takes the undefined instruction trap.
- *
- * @param regs system registers
- *
- * @note never invoke this function in application
- */
- void rt_hw_trap_undef(struct rt_hw_exp_stack *regs)
- {
- rt_kprintf("undefined instruction:\n");
- rt_hw_show_register(regs);
- #if defined(RT_USING_FINSH) && defined(MSH_USING_BUILT_IN_COMMANDS)
- list_thread();
- #endif
- rt_hw_cpu_shutdown();
- }
- /**
- * The software interrupt instruction (SWI) is used for entering
- * Supervisor mode, usually to request a particular supervisor
- * function.
- *
- * @param regs system registers
- *
- * @note never invoke this function in application
- */
- void rt_hw_trap_swi(struct rt_hw_exp_stack *regs)
- {
- rt_kprintf("software interrupt:\n");
- rt_hw_show_register(regs);
- #if defined(RT_USING_FINSH) && defined(MSH_USING_BUILT_IN_COMMANDS)
- list_thread();
- #endif
- rt_hw_cpu_shutdown();
- }
- /**
- * An abort indicates that the current memory access cannot be completed,
- * which occurs during an instruction prefetch.
- *
- * @param regs system registers
- *
- * @note never invoke this function in application
- */
- void rt_hw_trap_pabt(struct rt_hw_exp_stack *regs)
- {
- rt_kprintf("prefetch abort:\n");
- rt_hw_show_register(regs);
- #if defined(RT_USING_FINSH) && defined(MSH_USING_BUILT_IN_COMMANDS)
- list_thread();
- #endif
- rt_hw_cpu_shutdown();
- }
- /**
- * An abort indicates that the current memory access cannot be completed,
- * which occurs during a data access.
- *
- * @param regs system registers
- *
- * @note never invoke this function in application
- */
- void rt_hw_trap_dabt(struct rt_hw_exp_stack *regs)
- {
- rt_kprintf("data abort:");
- rt_hw_show_register(regs);
- #if defined(RT_USING_FINSH) && defined(MSH_USING_BUILT_IN_COMMANDS)
- list_thread();
- #endif
- rt_hw_cpu_shutdown();
- }
- /**
- * Normally, system will never reach here
- *
- * @param regs system registers
- *
- * @note never invoke this function in application
- */
- void rt_hw_trap_resv(struct rt_hw_exp_stack *regs)
- {
- rt_kprintf("reserved trap:\n");
- rt_hw_show_register(regs);
- #if defined(RT_USING_FINSH) && defined(MSH_USING_BUILT_IN_COMMANDS)
- list_thread();
- #endif
- rt_hw_cpu_shutdown();
- }
- #define GIC_ACK_INTID_MASK 0x000003ff
- void rt_hw_trap_irq(void)
- {
- void *param;
- unsigned long ir;
- unsigned long fullir;
- rt_isr_handler_t isr_func;
- extern struct rt_irq_desc isr_table[];
- fullir = arm_gic_get_active_irq(0);
- ir = fullir & GIC_ACK_INTID_MASK;
- if (ir == 1023)
- {
- /* Spurious interrupt */
- return;
- }
- /* get interrupt service routine */
- isr_func = isr_table[ir].handler;
- #ifdef RT_USING_INTERRUPT_INFO
- isr_table[ir].counter++;
- #endif
- if (isr_func)
- {
- /* Interrupt for myself. */
- param = isr_table[ir].param;
- /* turn to interrupt service routine */
- isr_func(ir, param);
- }
- /* end of interrupt */
- arm_gic_ack(0, fullir);
- }
- void rt_hw_trap_fiq(void)
- {
- void *param;
- unsigned long ir;
- unsigned long fullir;
- rt_isr_handler_t isr_func;
- extern struct rt_irq_desc isr_table[];
- fullir = arm_gic_get_active_irq(0);
- ir = fullir & GIC_ACK_INTID_MASK;
- /* get interrupt service routine */
- isr_func = isr_table[ir].handler;
- param = isr_table[ir].param;
- /* turn to interrupt service routine */
- isr_func(ir, param);
- /* end of interrupt */
- arm_gic_ack(0, fullir);
- }
|