rt-thread/bsp/stm32h743-nucleo/Libraries/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_rcc.h

/**
  ******************************************************************************
  * @file    stm32h7xx_hal_rcc.h
  * @author  MCD Application Team
  * @version V1.0.0
  * @date    21-April-2017
  * @brief   Header file of RCC HAL module.
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
  *
  * Redistribution and use in source and binary forms, with or without modification,
  * are permitted provided that the following conditions are met:
  *   1. Redistributions of source code must retain the above copyright notice,
  *      this list of conditions and the following disclaimer.
  *   2. Redistributions in binary form must reproduce the above copyright notice,
  *      this list of conditions and the following disclaimer in the documentation
  *      and/or other materials provided with the distribution.
  *   3. Neither the name of STMicroelectronics nor the names of its contributors
  *      may be used to endorse or promote products derived from this software
  *      without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  ******************************************************************************
  */

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32H7xx_HAL_RCC_H
#define __STM32H7xx_HAL_RCC_H

#ifdef __cplusplus
 extern "C" {
#endif

/* Includes ------------------------------------------------------------------*/
#include "stm32h7xx_hal_def.h"
   
/** @addtogroup STM32H7xx_HAL_Driver
  * @{
  */

/** @addtogroup RCC
  * @{
  */

/* Exported types ------------------------------------------------------------*/

/** @defgroup RCC_Exported_Types RCC Exported Types
  * @{
  */

/**
  * @brief  RCC PLL configuration structure definition
  */
typedef struct
{
  uint32_t PLLState;   /*!< The new state of the PLL.
                            This parameter can be a value of @ref RCC_PLL_Config                      */

  uint32_t PLLSource;  /*!< RCC_PLLSource: PLL entry clock source.
                            This parameter must be a value of @ref RCC_PLL_Clock_Source               */

  uint32_t PLLM;       /*!< PLLM: Division factor for PLL VCO input clock.
                            This parameter must be a number between Min_Data = 1 and Max_Data = 63    */

  uint32_t PLLN;       /*!< PLLN: Multiplication factor for PLL VCO output clock.
                            This parameter must be a number between Min_Data = 4 and Max_Data = 512   */   

  uint32_t PLLP;       /*!< PLLP: Division factor for system clock.
                            This parameter must be a number between Min_Data = 2 and Max_Data = 128   
                          odd division factors are not allowed                                        */

  uint32_t PLLQ;       /*!< PLLQ: Division factor for peripheral clocks.
                            This parameter must be a number between Min_Data = 1 and Max_Data = 128   */ 

  uint32_t PLLR;       /*!< PLLR: Division factor for peripheral clocks.
                            This parameter must be a number between Min_Data = 1 and Max_Data = 128   */ 
  uint32_t PLLRGE;     /*!<PLLRGE: PLL1 clock Input range 
                         This parameter must be a value of @ref RCC_PLL1_VCI_Range                    */
  uint32_t PLLVCOSEL;  /*!<PLLVCOSEL: PLL1 clock Output range 
                         This parameter must be a value of @ref RCC_PLL1_VCO_Range                    */

  uint32_t PLLFRACN;   /*!<PLLFRACN: Specifies Fractional Part Of The Multiplication Factor for
                        PLL1 VCO It should be a value between 0 and 8191                              */

}RCC_PLLInitTypeDef;


/**
  * @brief  RCC Internal/External Oscillator (HSE, HSI, CSI, LSE and LSI) configuration structure definition
  */
typedef struct
{
  uint32_t OscillatorType;       /*!< The oscillators to be configured.
                                      This parameter can be a value of @ref RCC_Oscillator_Type                   */

  uint32_t HSEState;             /*!< The new state of the HSE.
                                      This parameter can be a value of @ref RCC_HSE_Config                        */

  uint32_t LSEState;             /*!< The new state of the LSE.
                                      This parameter can be a value of @ref RCC_LSE_Config                        */

  uint32_t HSIState;             /*!< The new state of the HSI.
                                      This parameter can be a value of @ref RCC_HSI_Config                        */

  uint32_t HSICalibrationValue;  /*!< The calibration trimming value.
                                      This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x3F */

  uint32_t LSIState;             /*!< The new state of the LSI.
                                      This parameter can be a value of @ref RCC_LSI_Config                        */
  
 uint32_t HSI48State;            /*!< The new state of the HSI48.
                                      This parameter can be a value of @ref RCC_HSI48_Config                      */

  uint32_t CSIState;             /*!< The new state of the CSI.
                                      This parameter can be a value of @ref RCC_CSI_Config */

  uint32_t CSICalibrationValue;  /*!< The calibration trimming value.
                                      This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F */

  RCC_PLLInitTypeDef PLL;        /*!< PLL structure parameters                                                    */

}RCC_OscInitTypeDef;

/**
  * @brief  RCC System, AHB and APB busses clock configuration structure definition
  */
typedef struct
{
  uint32_t ClockType;             /*!< The clock to be configured.
                                       This parameter can be a value of @ref RCC_System_Clock_Type                          */

  uint32_t SYSCLKSource;          /*!< The clock source (SYSCLKS) used as system clock.
                                       This parameter can be a value of @ref RCC_System_Clock_Source                        */

  uint32_t SYSCLKDivider;         /*!< The system clock  divider. This parameter can be
                                       a value of @ref RCC_SYS_Clock_Source                                                 */

  uint32_t AHBCLKDivider;         /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK).
                                       This parameter can be a value of @ref RCC_HCLK_Clock_Source                          */

  uint32_t APB3CLKDivider;        /*!< The APB3 clock (D1PCLK1) divider. This clock is derived from the AHB clock (HCLK).
                                       This parameter can be a value of @ref RCC_APB3_Clock_Source                        */

  uint32_t APB1CLKDivider;        /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK).
                                       This parameter can be a value of @ref RCC_APB1_Clock_Source                        */
  uint32_t APB2CLKDivider;        /*!< The APB2 clock (PCLK2) divider. This clock is derived from the AHB clock (HCLK).
                                       This parameter can be a value of @ref RCC_APB2_Clock_Source                        */
  uint32_t APB4CLKDivider;      /*!< The APB4 clock (D3PCLK1) divider. This clock is derived from the AHB clock (HCLK).
                                       This parameter can be a value of @ref RCC_APB4_Clock_Source                        */
}RCC_ClkInitTypeDef;

/**
  * @}
  */

/* Exported constants --------------------------------------------------------*/

/** @defgroup RCC_Exported_Constants RCC Exported Constants
  * @{
  */

/** @defgroup RCC_Oscillator_Type  RCC Oscillator Type
  * @{
  */
#define RCC_OSCILLATORTYPE_NONE        ((uint32_t)0x00000000)
#define RCC_OSCILLATORTYPE_HSE         ((uint32_t)0x00000001)
#define RCC_OSCILLATORTYPE_HSI         ((uint32_t)0x00000002)
#define RCC_OSCILLATORTYPE_LSE         ((uint32_t)0x00000004)
#define RCC_OSCILLATORTYPE_LSI         ((uint32_t)0x00000008)
#define RCC_OSCILLATORTYPE_CSI         ((uint32_t)0x00000010)
#define RCC_OSCILLATORTYPE_HSI48       ((uint32_t)0x00000020)

/**
  * @}
  */

/** @defgroup RCC_HSE_Config  RCC HSE Config
  * @{
  */
#define RCC_HSE_OFF                    ((uint32_t)0x00000000)
#define RCC_HSE_ON                     RCC_CR_HSEON
#define RCC_HSE_BYPASS                 ((uint32_t)(RCC_CR_HSEBYP | RCC_CR_HSEON))

/**
  * @}
  */

/** @defgroup RCC_LSE_Config  RCC LSE Config
  * @{
  */
#define RCC_LSE_OFF                    ((uint32_t)0x00000000)
#define RCC_LSE_ON                     RCC_BDCR_LSEON
#define RCC_LSE_BYPASS                 ((uint32_t)(RCC_BDCR_LSEBYP | RCC_BDCR_LSEON))

/**
  * @}
  */

/** @defgroup RCC_HSI_Config  RCC HSI Config
  * @{
  */
#define RCC_HSI_OFF                      ((uint32_t)0x00000000)           /*!< HSI clock deactivation */
#define RCC_HSI_ON                       RCC_CR_HSION                     /*!< HSI clock activation */

#define RCC_HSI_DIV1                     (RCC_CR_HSIDIV_1 | RCC_CR_HSION) /*!< HSI_DIV1 clock activation */
#define RCC_HSI_DIV2                     (RCC_CR_HSIDIV_2 | RCC_CR_HSION) /*!< HSI_DIV2 clock activation */
#define RCC_HSI_DIV4                     (RCC_CR_HSIDIV_4 | RCC_CR_HSION) /*!< HSI_DIV4 clock activation */
#define RCC_HSI_DIV8                     (RCC_CR_HSIDIV | RCC_CR_HSION)   /*!< HSI_DIV8 clock activation */



#define RCC_HSICALIBRATION_DEFAULT     ((uint32_t)0x20U)         /* Default HSI calibration trimming value */
/**
  * @}
  */

/** @defgroup RCC_HSI48_Config  RCC HSI48 Config
  * @{
  */
#define RCC_HSI48_OFF                      ((uint8_t)0x00)
#define RCC_HSI48_ON                       ((uint8_t)0x01)

/**
  * @}
  */

/** @defgroup RCC_LSI_Config  RCC LSI Config
  * @{
  */
#define RCC_LSI_OFF                    ((uint32_t)0x00000000)
#define RCC_LSI_ON                     RCC_CSR_LSION

/**
  * @}
  */

/** @defgroup RCC_CSI_Config  RCC CSI Config
  * @{
  */
#define RCC_CSI_OFF                    ((uint32_t)0x00000000)
#define RCC_CSI_ON                     RCC_CR_CSION

#define RCC_CSICALIBRATION_DEFAULT     ((uint32_t)0x10U)         /* Default CSI calibration trimming value */

/**
  * @}
  */

/** @defgroup RCC_PLL_Config  RCC PLL Config
  * @{
  */
#define RCC_PLL_NONE                   ((uint32_t)0x00000000)
#define RCC_PLL_OFF                    ((uint32_t)0x00000001)
#define RCC_PLL_ON                     ((uint32_t)0x00000002)

/**
  * @}
  */


/** @defgroup RCC_PLL_Clock_Source  RCC PLL Clock Source
  * @{
  */
#define RCC_PLLSOURCE_HSI              ((uint32_t)0x00000000)
#define RCC_PLLSOURCE_CSI              ((uint32_t)0x00000001)
#define RCC_PLLSOURCE_HSE              ((uint32_t)0x00000002)
#define RCC_PLLSOURCE_NONE             ((uint32_t)0x00000003)                               
/**
  * @}
  */

/** @defgroup RCC_PLL_Clock_Output  RCC PLL Clock Output
  * @{
  */
#define RCC_PLL1_DIVP                RCC_PLLCFGR_DIVP1EN
#define RCC_PLL1_DIVQ                RCC_PLLCFGR_DIVQ1EN
#define RCC_PLL1_DIVR                RCC_PLLCFGR_DIVR1EN

/**
  * @}
  */



/** @defgroup RCC_PLL1_VCI_Range  RCC PLL1 VCI Range
  * @{
  */
#define RCC_PLL1VCIRANGE_0                RCC_PLLCFGR_PLL1RGE_0
#define RCC_PLL1VCIRANGE_1                RCC_PLLCFGR_PLL1RGE_1
#define RCC_PLL1VCIRANGE_2                RCC_PLLCFGR_PLL1RGE_2
#define RCC_PLL1VCIRANGE_3                RCC_PLLCFGR_PLL1RGE_3


/**
  * @}
  */


/** @defgroup RCC_PLL1_VCO_Range  RCC PLL1 VCO Range
  * @{
  */
#define RCC_PLL1VCOWIDE                 ((uint32_t)0x00000000)
#define RCC_PLL1VCOMEDIUM               RCC_PLLCFGR_PLL1VCOSEL

/**
  * @}
  */


/** @defgroup RCC_System_Clock_Type  RCC System Clock Type
  * @{
  */
#define RCC_CLOCKTYPE_SYSCLK           ((uint32_t)0x00000001)
#define RCC_CLOCKTYPE_HCLK             ((uint32_t)0x00000002)
#define RCC_CLOCKTYPE_D1PCLK1          ((uint32_t)0x00000004)
#define RCC_CLOCKTYPE_PCLK1            ((uint32_t)0x00000008)
#define RCC_CLOCKTYPE_PCLK2            ((uint32_t)0x00000010)
#define RCC_CLOCKTYPE_D3PCLK1          ((uint32_t)0x00000020)

/**
  * @}
  */

/** @defgroup RCC_System_Clock_Source  RCC System Clock Source
  * @{
  */
#define RCC_SYSCLKSOURCE_CSI           RCC_CFGR_SW_CSI
#define RCC_SYSCLKSOURCE_HSI           RCC_CFGR_SW_HSI
#define RCC_SYSCLKSOURCE_HSE           RCC_CFGR_SW_HSE
#define RCC_SYSCLKSOURCE_PLLCLK        RCC_CFGR_SW_PLL1

/**
  * @}
  */

/** @defgroup RCC_SYS_Clock_Source  RCC SYS Clock Source
  * @{
  */
#define RCC_SYSCLK_DIV1                RCC_D1CFGR_D1CPRE_DIV1
#define RCC_SYSCLK_DIV2                RCC_D1CFGR_D1CPRE_DIV2
#define RCC_SYSCLK_DIV4                RCC_D1CFGR_D1CPRE_DIV4
#define RCC_SYSCLK_DIV8                RCC_D1CFGR_D1CPRE_DIV8
#define RCC_SYSCLK_DIV16               RCC_D1CFGR_D1CPRE_DIV16
#define RCC_SYSCLK_DIV64               RCC_D1CFGR_D1CPRE_DIV64
#define RCC_SYSCLK_DIV128              RCC_D1CFGR_D1CPRE_DIV128
#define RCC_SYSCLK_DIV256              RCC_D1CFGR_D1CPRE_DIV256
#define RCC_SYSCLK_DIV512              RCC_D1CFGR_D1CPRE_DIV512

/**
  * @}
  */


/** @defgroup RCC_HCLK_Clock_Source  RCC HCLK Clock Source
  * @{
  */
#define RCC_HCLK_DIV1                RCC_D1CFGR_HPRE_DIV1
#define RCC_HCLK_DIV2                RCC_D1CFGR_HPRE_DIV2
#define RCC_HCLK_DIV4                RCC_D1CFGR_HPRE_DIV4
#define RCC_HCLK_DIV8                RCC_D1CFGR_HPRE_DIV8
#define RCC_HCLK_DIV16               RCC_D1CFGR_HPRE_DIV16
#define RCC_HCLK_DIV64               RCC_D1CFGR_HPRE_DIV64
#define RCC_HCLK_DIV128              RCC_D1CFGR_HPRE_DIV128
#define RCC_HCLK_DIV256              RCC_D1CFGR_HPRE_DIV256
#define RCC_HCLK_DIV512              RCC_D1CFGR_HPRE_DIV512

/**
  * @}
  */

/** @defgroup RCC_APB3_Clock_Source  RCC APB3 Clock Source
  * @{
  */
#define RCC_APB3_DIV1                  RCC_D1CFGR_D1PPRE_DIV1
#define RCC_APB3_DIV2                  RCC_D1CFGR_D1PPRE_DIV2
#define RCC_APB3_DIV4                  RCC_D1CFGR_D1PPRE_DIV4
#define RCC_APB3_DIV8                  RCC_D1CFGR_D1PPRE_DIV8
#define RCC_APB3_DIV16                 RCC_D1CFGR_D1PPRE_DIV16

/**
  * @}
  */

/** @defgroup RCC_APB1_Clock_Source  RCC APB1 Clock Source
  * @{
  */
#define RCC_APB1_DIV1                  RCC_D2CFGR_D2PPRE1_DIV1
#define RCC_APB1_DIV2                  RCC_D2CFGR_D2PPRE1_DIV2
#define RCC_APB1_DIV4                  RCC_D2CFGR_D2PPRE1_DIV4
#define RCC_APB1_DIV8                  RCC_D2CFGR_D2PPRE1_DIV8
#define RCC_APB1_DIV16                 RCC_D2CFGR_D2PPRE1_DIV16

/**
  * @}
  */

/** @defgroup RCC_APB2_Clock_Source  RCC APB2 Clock Source
  * @{
  */
#define RCC_APB2_DIV1                  RCC_D2CFGR_D2PPRE2_DIV1
#define RCC_APB2_DIV2                  RCC_D2CFGR_D2PPRE2_DIV2
#define RCC_APB2_DIV4                  RCC_D2CFGR_D2PPRE2_DIV4
#define RCC_APB2_DIV8                  RCC_D2CFGR_D2PPRE2_DIV8
#define RCC_APB2_DIV16                 RCC_D2CFGR_D2PPRE2_DIV16

/**
  * @}
  */

/** @defgroup RCC_APB4_Clock_Source  RCC APB4 Clock Source
  * @{
  */
#define RCC_APB4_DIV1                  RCC_D3CFGR_D3PPRE_DIV1
#define RCC_APB4_DIV2                  RCC_D3CFGR_D3PPRE_DIV2
#define RCC_APB4_DIV4                  RCC_D3CFGR_D3PPRE_DIV4
#define RCC_APB4_DIV8                  RCC_D3CFGR_D3PPRE_DIV8
#define RCC_APB4_DIV16                 RCC_D3CFGR_D3PPRE_DIV16

/**
  * @}
  */

/** @defgroup RCC_RTC_Clock_Source  RCC RTC Clock Source
  * @{
  */
#define RCC_RTCCLKSOURCE_LSE             ((uint32_t)0x00000100U)
#define RCC_RTCCLKSOURCE_LSI             ((uint32_t)0x00000200U)
#define RCC_RTCCLKSOURCE_HSE_DIV2        ((uint32_t)0x00002300U)  
#define RCC_RTCCLKSOURCE_HSE_DIV3        ((uint32_t)0x00003300U)  
#define RCC_RTCCLKSOURCE_HSE_DIV4        ((uint32_t)0x00004300U)   
#define RCC_RTCCLKSOURCE_HSE_DIV5        ((uint32_t)0x00005300U)
#define RCC_RTCCLKSOURCE_HSE_DIV6        ((uint32_t)0x00006300U)
#define RCC_RTCCLKSOURCE_HSE_DIV7        ((uint32_t)0x00007300U)
#define RCC_RTCCLKSOURCE_HSE_DIV8        ((uint32_t)0x00008300U)
#define RCC_RTCCLKSOURCE_HSE_DIV9        ((uint32_t)0x00009300U)
#define RCC_RTCCLKSOURCE_HSE_DIV10       ((uint32_t)0x0000A300U)
#define RCC_RTCCLKSOURCE_HSE_DIV11       ((uint32_t)0x0000B300U)
#define RCC_RTCCLKSOURCE_HSE_DIV12       ((uint32_t)0x0000C300U)
#define RCC_RTCCLKSOURCE_HSE_DIV13       ((uint32_t)0x0000D300U)
#define RCC_RTCCLKSOURCE_HSE_DIV14       ((uint32_t)0x0000E300U)
#define RCC_RTCCLKSOURCE_HSE_DIV15       ((uint32_t)0x0000F300U)
#define RCC_RTCCLKSOURCE_HSE_DIV16       ((uint32_t)0x00010300U)
#define RCC_RTCCLKSOURCE_HSE_DIV17       ((uint32_t)0x00011300U)
#define RCC_RTCCLKSOURCE_HSE_DIV18       ((uint32_t)0x00012300U)
#define RCC_RTCCLKSOURCE_HSE_DIV19       ((uint32_t)0x00013300U)
#define RCC_RTCCLKSOURCE_HSE_DIV20       ((uint32_t)0x00014300U)
#define RCC_RTCCLKSOURCE_HSE_DIV21       ((uint32_t)0x00015300U)
#define RCC_RTCCLKSOURCE_HSE_DIV22       ((uint32_t)0x00016300U)
#define RCC_RTCCLKSOURCE_HSE_DIV23       ((uint32_t)0x00017300U)
#define RCC_RTCCLKSOURCE_HSE_DIV24       ((uint32_t)0x00018300U)
#define RCC_RTCCLKSOURCE_HSE_DIV25       ((uint32_t)0x00019300U)
#define RCC_RTCCLKSOURCE_HSE_DIV26       ((uint32_t)0x0001A300U)
#define RCC_RTCCLKSOURCE_HSE_DIV27       ((uint32_t)0x0001B300U)
#define RCC_RTCCLKSOURCE_HSE_DIV28       ((uint32_t)0x0001C300U)
#define RCC_RTCCLKSOURCE_HSE_DIV29       ((uint32_t)0x0001D300U)
#define RCC_RTCCLKSOURCE_HSE_DIV30       ((uint32_t)0x0001E300U)
#define RCC_RTCCLKSOURCE_HSE_DIV31       ((uint32_t)0x0001F300U)
#define RCC_RTCCLKSOURCE_HSE_DIV32       ((uint32_t)0x00020300U)
#define RCC_RTCCLKSOURCE_HSE_DIV33       ((uint32_t)0x00021300U)
#define RCC_RTCCLKSOURCE_HSE_DIV34       ((uint32_t)0x00022300U)
#define RCC_RTCCLKSOURCE_HSE_DIV35       ((uint32_t)0x00023300U)
#define RCC_RTCCLKSOURCE_HSE_DIV36       ((uint32_t)0x00024300U)
#define RCC_RTCCLKSOURCE_HSE_DIV37       ((uint32_t)0x00025300U)
#define RCC_RTCCLKSOURCE_HSE_DIV38       ((uint32_t)0x00026300U)
#define RCC_RTCCLKSOURCE_HSE_DIV39       ((uint32_t)0x00027300U)
#define RCC_RTCCLKSOURCE_HSE_DIV40       ((uint32_t)0x00028300U)
#define RCC_RTCCLKSOURCE_HSE_DIV41       ((uint32_t)0x00029300U)
#define RCC_RTCCLKSOURCE_HSE_DIV42       ((uint32_t)0x0002A300U)
#define RCC_RTCCLKSOURCE_HSE_DIV43       ((uint32_t)0x0002B300U)
#define RCC_RTCCLKSOURCE_HSE_DIV44       ((uint32_t)0x0002C300U)
#define RCC_RTCCLKSOURCE_HSE_DIV45       ((uint32_t)0x0002D300U)
#define RCC_RTCCLKSOURCE_HSE_DIV46       ((uint32_t)0x0002E300U)
#define RCC_RTCCLKSOURCE_HSE_DIV47       ((uint32_t)0x0002F300U)
#define RCC_RTCCLKSOURCE_HSE_DIV48       ((uint32_t)0x00030300U)
#define RCC_RTCCLKSOURCE_HSE_DIV49       ((uint32_t)0x00031300U)
#define RCC_RTCCLKSOURCE_HSE_DIV50       ((uint32_t)0x00032300U)
#define RCC_RTCCLKSOURCE_HSE_DIV51       ((uint32_t)0x00033300U)
#define RCC_RTCCLKSOURCE_HSE_DIV52       ((uint32_t)0x00034300U)
#define RCC_RTCCLKSOURCE_HSE_DIV53       ((uint32_t)0x00035300U)
#define RCC_RTCCLKSOURCE_HSE_DIV54       ((uint32_t)0x00036300U)
#define RCC_RTCCLKSOURCE_HSE_DIV55       ((uint32_t)0x00037300U)
#define RCC_RTCCLKSOURCE_HSE_DIV56       ((uint32_t)0x00038300U)
#define RCC_RTCCLKSOURCE_HSE_DIV57       ((uint32_t)0x00039300U)
#define RCC_RTCCLKSOURCE_HSE_DIV58       ((uint32_t)0x0003A300U)
#define RCC_RTCCLKSOURCE_HSE_DIV59       ((uint32_t)0x0003B300U)
#define RCC_RTCCLKSOURCE_HSE_DIV60       ((uint32_t)0x0003C300U)
#define RCC_RTCCLKSOURCE_HSE_DIV61       ((uint32_t)0x0003D300U)
#define RCC_RTCCLKSOURCE_HSE_DIV62       ((uint32_t)0x0003E300U)
#define RCC_RTCCLKSOURCE_HSE_DIV63       ((uint32_t)0x0003F300U)


/**
  * @}
  */


/** @defgroup RCC_MCO_Index  RCC MCO Index
  * @{
  */
#define RCC_MCO1                         ((uint32_t)0x00000000)
#define RCC_MCO2                         ((uint32_t)0x00000001)

/**
  * @}
  */

/** @defgroup RCC_MCO1_Clock_Source  RCC MCO1 Clock Source
  * @{
  */
#define RCC_MCO1SOURCE_HSI               ((uint32_t)0x00000000)
#define RCC_MCO1SOURCE_LSE               RCC_CFGR_MCO1_0
#define RCC_MCO1SOURCE_HSE               RCC_CFGR_MCO1_1
#define RCC_MCO1SOURCE_PLL1QCLK          ((uint32_t)RCC_CFGR_MCO1_0 | RCC_CFGR_MCO1_1)
#define RCC_MCO1SOURCE_HSI48              RCC_CFGR_MCO1_2

/**
  * @}
  */

/** @defgroup RCC_MCO2_Clock_Source  RCC MCO2 Clock Source
  * @{
  */
#define RCC_MCO2SOURCE_SYSCLK            ((uint32_t)0x00000000)
#define RCC_MCO2SOURCE_PLL2PCLK          RCC_CFGR_MCO2_0
#define RCC_MCO2SOURCE_HSE               RCC_CFGR_MCO2_1
#define RCC_MCO2SOURCE_PLLCLK          ((uint32_t)RCC_CFGR_MCO2_0 | RCC_CFGR_MCO2_1)
#define RCC_MCO2SOURCE_CSICLK            RCC_CFGR_MCO2_2
#define RCC_MCO2SOURCE_LSICLK            ((uint32_t)RCC_CFGR_MCO2_0 | RCC_CFGR_MCO2_2)

/**
  * @}
  */

/** @defgroup RCC_MCOx_Clock_Prescaler  RCC MCOx Clock Prescaler
  * @{
  */
#define RCC_MCODIV_1                    RCC_CFGR_MCO1PRE_0
#define RCC_MCODIV_2                    RCC_CFGR_MCO1PRE_1
#define RCC_MCODIV_3                    ((uint32_t)RCC_CFGR_MCO1PRE_0 | RCC_CFGR_MCO1PRE_1)
#define RCC_MCODIV_4                    RCC_CFGR_MCO1PRE_2
#define RCC_MCODIV_5                    ((uint32_t)RCC_CFGR_MCO1PRE_0 | RCC_CFGR_MCO1PRE_2)
#define RCC_MCODIV_6                    ((uint32_t)RCC_CFGR_MCO1PRE_1 | RCC_CFGR_MCO1PRE_2)
#define RCC_MCODIV_7                    ((uint32_t)RCC_CFGR_MCO1PRE_0 | RCC_CFGR_MCO1PRE_1 | RCC_CFGR_MCO1PRE_2)
#define RCC_MCODIV_8                    RCC_CFGR_MCO1PRE_3
#define RCC_MCODIV_9                    ((uint32_t)RCC_CFGR_MCO1PRE_0 | RCC_CFGR_MCO1PRE_3)
#define RCC_MCODIV_10                   ((uint32_t)RCC_CFGR_MCO1PRE_1 | RCC_CFGR_MCO1PRE_3)
#define RCC_MCODIV_11                   ((uint32_t)RCC_CFGR_MCO1PRE_0 | RCC_CFGR_MCO1PRE_1 | RCC_CFGR_MCO1PRE_3)
#define RCC_MCODIV_12                   ((uint32_t)RCC_CFGR_MCO1PRE_2 | RCC_CFGR_MCO1PRE_3)
#define RCC_MCODIV_13                   ((uint32_t)RCC_CFGR_MCO1PRE_0 | RCC_CFGR_MCO1PRE_2 | RCC_CFGR_MCO1PRE_3)
#define RCC_MCODIV_14                   ((uint32_t)RCC_CFGR_MCO1PRE_1 | RCC_CFGR_MCO1PRE_2 | RCC_CFGR_MCO1PRE_3)
#define RCC_MCODIV_15                   RCC_CFGR_MCO1PRE


/**
  * @}
  */

/** @defgroup RCC_Interrupt  RCC Interrupt
  * @{
  */
#define RCC_IT_LSIRDY                  ((uint32_t)0x00000001)
#define RCC_IT_LSERDY                  ((uint32_t)0x00000002)
#define RCC_IT_HSIRDY                  ((uint32_t)0x00000004)
#define RCC_IT_HSERDY                  ((uint32_t)0x00000008)
#define RCC_IT_CSIRDY                  ((uint32_t)0x00000010)
#define RCC_IT_HSI48RDY                ((uint32_t)0x00000020)
#define RCC_IT_PLLRDY                  ((uint32_t)0x00000040)
#define RCC_IT_PLL2RDY                 ((uint32_t)0x00000080)
#define RCC_IT_PLL3RDY                 ((uint32_t)0x00000100)
#define RCC_IT_LSECSS                  ((uint32_t)0x00000200)
#define RCC_IT_CSS                     ((uint32_t)0x00000400)
/**
  * @}
  */

/** @defgroup RCC_Flag  RCC Flag
  *        Elements values convention: 0XXYYYYYb
  *           - YYYYY  : Flag position in the register
  *           - 0XX  : Register index
  *                 - 01: CR register
  *                 - 10: BDCR register
  *                 - 11: CSR register
  * @{
  */
/* Flags in the CR register */
#define RCC_FLAG_HSIRDY                ((uint8_t)0x22)
#define RCC_FLAG_HSIDIV                ((uint8_t)0x25)
#define RCC_FLAG_CSIRDY                ((uint8_t)0x28)
#define RCC_FLAG_HSI48RDY              ((uint8_t)0x2D)
#define RCC_FLAG_D1CKRDY               ((uint8_t)0x2E)
#define RCC_FLAG_D2CKRDY               ((uint8_t)0x2F)
#define RCC_FLAG_HSERDY                ((uint8_t)0x31)
#define RCC_FLAG_PLLRDY                ((uint8_t)0x39)
#define RCC_FLAG_PLL2RDY               ((uint8_t)0x3B)
#define RCC_FLAG_PLL3RDY               ((uint8_t)0x3D)
/* Flags in the BDCR register */
#define RCC_FLAG_LSERDY                ((uint8_t)0x41)

/* Flags in the CSR register */
#define RCC_FLAG_LSIRDY                ((uint8_t)0x61)

/* Flags in the RSR register */
#define RCC_FLAG_RMVF                  ((uint8_t)0x90)
#define RCC_FLAG_CPURST                ((uint8_t)0x91)


#define RCC_FLAG_D1RST                 ((uint8_t)0x93)
#define RCC_FLAG_D2RST                 ((uint8_t)0x94)
#define RCC_FLAG_BORRST                ((uint8_t)0x95)
#define RCC_FLAG_PINRST                ((uint8_t)0x96)
#define RCC_FLAG_PORRST                ((uint8_t)0x97)
#define RCC_FLAG_SFTRST                ((uint8_t)0x98)
#define RCC_FLAG_IWDG1RST              ((uint8_t)0x9A)
#define RCC_FLAG_WWDG1RST              ((uint8_t)0x9C)
#define RCC_FLAG_LPWR1RST              ((uint8_t)0x9E)
#define RCC_FLAG_LPWR2RST              ((uint8_t)0x9F)


/**
  * @}
  */

/** @defgroup RCC_LSEDrive_Config LSE Drive Config
  * @{
  */
#define RCC_LSEDRIVE_LOW                 ((uint32_t)0x00000000) /*!< LSE low drive capability */
#define RCC_LSEDRIVE_MEDIUMLOW           RCC_BDCR_LSEDRV_0      /*!< LSE medium low drive capability */
                                                                /* Workaround implementation on medium low */
#define RCC_LSEDRIVE_MEDIUMHIGH          RCC_BDCR_LSEDRV_1      /*!< LSE medium high drive capability */ 
                                                                /* Workaround implementation on medium high */
#define RCC_LSEDRIVE_HIGH                RCC_BDCR_LSEDRV        /*!< LSE high drive capability */
/**
  * @}
  */

/** @defgroup RCC_Stop_WakeUpClock  RCC Stop WakeUpClock
  * @{
  */
#define RCC_STOP_WAKEUPCLOCK_HSI       ((uint32_t)0x00000000)
#define RCC_STOP_WAKEUPCLOCK_CSI       RCC_CFGR_STOPWUCK

/**
  * @}
  */ 

/** @defgroup RCC_Stop_KernelWakeUpClock  RCC Stop KernelWakeUpClock
  * @{
  */
#define RCC_STOP_KERWAKEUPCLOCK_HSI       ((uint32_t)0x00000000)
#define RCC_STOP_KERWAKEUPCLOCK_CSI        RCC_CFGR_STOPKERWUCK


/**
  * @}
  */ 
/**
  * @}
  */

/* Exported macros -----------------------------------------------------------*/

/** @defgroup RCC_Exported_Macros RCC Exported Macros
  * @{
  */
  
/** @brief  Enable or disable the AHB3 peripheral clock.
  * @note   After reset, the peripheral clock (used for registers read/write access)
  *         is disabled and the application software has to enable this clock before
  *         using it.
  */
#define __HAL_RCC_MDMA_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_MDMAEN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_MDMAEN);\
                                        UNUSED(tmpreg); \
                                       } while(0)

#define __HAL_RCC_DMA2D_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_DMA2DEN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_DMA2DEN);\
                                        UNUSED(tmpreg); \
                                       } while(0)

#define __HAL_RCC_JPGDECEN_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_JPGDECEN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_JPGDECEN);\
                                        UNUSED(tmpreg); \
                                       } while(0)

#define __HAL_RCC_FLASH_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FLASHEN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FLASHEN);\
                                        UNUSED(tmpreg); \
                                       } while(0)

#define __HAL_RCC_FMC_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\
                                        UNUSED(tmpreg); \
                                       } while(0) 

#define __HAL_RCC_QSPI_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\
                                        UNUSED(tmpreg); \
                                       } while(0)

#define __HAL_RCC_SDMMC1_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_SDMMC1EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_SDMMC1EN);\
                                        UNUSED(tmpreg); \
                                       } while(0) 


#define __HAL_RCC_MDMA_CLK_DISABLE()            (RCC->AHB3ENR &= ~ (RCC_AHB3ENR_MDMAEN))
#define __HAL_RCC_DMA2D_CLK_DISABLE()           (RCC->AHB3ENR &= ~ (RCC_AHB3ENR_DMA2DEN))
#define __HAL_RCC_JPGDECEN_CLK_DISABLE()        (RCC->AHB3ENR &= ~ (RCC_AHB3ENR_JPGDECEN))
#define __HAL_RCC_FLASH_CLK_DISABLE()           (RCC->AHB3ENR &= ~ (RCC_AHB3ENR_FLASHEN))
#define __HAL_RCC_FMC_CLK_DISABLE()             (RCC->AHB3ENR &= ~ (RCC_AHB3ENR_FMCEN))
#define __HAL_RCC_QSPI_CLK_DISABLE()            (RCC->AHB3ENR &= ~ (RCC_AHB3ENR_QSPIEN))
#define __HAL_RCC_SDMMC1_CLK_DISABLE()          (RCC->AHB3ENR &= ~ (RCC_AHB3ENR_SDMMC1EN))


/** @brief  Enable or disable the AHB1 peripheral clock.
  * @note   After reset, the peripheral clock (used for registers read/write access)
  *         is disabled and the application software has to enable this clock before
  *         using it.
  */

#define __HAL_RCC_DMA1_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)

#define __HAL_RCC_DMA2_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)

#define __HAL_RCC_ADC12_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ADC12EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ADC12EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)

#define __HAL_RCC_ETH1MAC_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETH1MACEN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETH1MACEN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_ETH1TX_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETH1TXEN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETH1TXEN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_ETH1RX_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETH1RXEN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETH1RXEN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                                                                   

#define __HAL_RCC_USB1_OTG_HS_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_USB1OTGHSEN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_USB1OTGHSEN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_USB1_OTG_HS_ULPI_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_USB1OTGHSULPIEN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_USB1OTGHSULPIEN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_USB2_OTG_FS_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_USB2OTGHSEN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_USB2OTGHSEN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_USB2_OTG_FS_ULPI_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_USB2OTGHSULPIEN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_USB2OTGHSULPIEN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_DMA1_CLK_DISABLE()             (RCC->AHB1ENR &= ~ (RCC_AHB1ENR_DMA1EN))
#define __HAL_RCC_DMA2_CLK_DISABLE()             (RCC->AHB1ENR &= ~ (RCC_AHB1ENR_DMA2EN))
#define __HAL_RCC_ADC12_CLK_DISABLE()            (RCC->AHB1ENR &= ~ (RCC_AHB1ENR_ADC12EN))
#define __HAL_RCC_ETH1MAC_CLK_DISABLE()          (RCC->AHB1ENR &= ~ (RCC_AHB1ENR_ETH1MACEN))
#define __HAL_RCC_ETH1TX_CLK_DISABLE()           (RCC->AHB1ENR &= ~ (RCC_AHB1ENR_ETH1TXEN))
#define __HAL_RCC_ETH1RX_CLK_DISABLE()           (RCC->AHB1ENR &= ~ (RCC_AHB1ENR_ETH1RXEN))
#define __HAL_RCC_USB1_OTG_HS_CLK_DISABLE()      (RCC->AHB1ENR &= ~ (RCC_AHB1ENR_USB1OTGHSEN))
#define __HAL_RCC_USB1_OTG_HS_ULPI_CLK_DISABLE() (RCC->AHB1ENR &= ~ (RCC_AHB1ENR_USB1OTGHSULPIEN))
#define __HAL_RCC_USB2_OTG_FS_CLK_DISABLE()      (RCC->AHB1ENR &= ~ (RCC_AHB1ENR_USB2OTGHSEN))
#define __HAL_RCC_USB2_OTG_FS_ULPI_CLK_DISABLE() (RCC->AHB1ENR &= ~ (RCC_AHB1ENR_USB2OTGHSULPIEN))

/** @brief  Enable or disable the AHB2 peripheral clock.
  * @note   After reset, the peripheral clock (used for registers read/write access)
  *         is disabled and the application software has to enable this clock before
  *         using it.
  */

#define __HAL_RCC_DCMI_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                         

#define __HAL_RCC_CRYP_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_HASH_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_RNG_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_SDMMC2_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_SDMMC2EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_SDMMC2EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_D2SRAM1_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_D2SRAM1EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_D2SRAM1EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_D2SRAM2_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_D2SRAM2EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_D2SRAM2EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_D2SRAM3_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_D2SRAM3EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_D2SRAM3EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_DCMI_CLK_DISABLE()             (RCC->AHB2ENR &= ~ (RCC_AHB2ENR_DCMIEN))
#define __HAL_RCC_CRYP_CLK_DISABLE()             (RCC->AHB2ENR &= ~ (RCC_AHB2ENR_CRYPEN))
#define __HAL_RCC_HASH_CLK_DISABLE()             (RCC->AHB2ENR &= ~ (RCC_AHB2ENR_HASHEN))
#define __HAL_RCC_RNG_CLK_DISABLE()              (RCC->AHB2ENR &= ~ (RCC_AHB2ENR_RNGEN))
#define __HAL_RCC_SDMMC2_CLK_DISABLE()           (RCC->AHB2ENR &= ~ (RCC_AHB2ENR_SDMMC2EN))
#define __HAL_RCC_D2SRAM1_CLK_DISABLE()          (RCC->AHB2ENR &= ~ (RCC_AHB2ENR_D2SRAM1EN))
#define __HAL_RCC_D2SRAM2_CLK_DISABLE()          (RCC->AHB2ENR &= ~ (RCC_AHB2ENR_D2SRAM2EN))
#define __HAL_RCC_D2SRAM3_CLK_DISABLE()          (RCC->AHB2ENR &= ~ (RCC_AHB2ENR_D2SRAM3EN))

/** @brief  Enable or disable the AHB4 peripheral clock.
  * @note   After reset, the peripheral clock (used for registers read/write access)
  *         is disabled and the application software has to enable this clock before
  *         using it.
  */

#define __HAL_RCC_GPIOA_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOAEN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOAEN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_GPIOB_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOBEN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOBEN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_GPIOC_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOCEN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOCEN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_GPIOD_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIODEN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIODEN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_GPIOE_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOEEN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOEEN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_GPIOF_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOFEN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOFEN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_GPIOG_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOGEN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOGEN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_GPIOH_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOHEN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOHEN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_GPIOI_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOIEN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOIEN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_GPIOJ_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOJEN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOJEN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_GPIOK_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOKEN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOKEN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                                                                  

#define __HAL_RCC_CRC_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_CRCEN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_CRCEN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_BDMA_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_BDMAEN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_BDMAEN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_ADC3_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_ADC3EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_ADC3EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_HSEM_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_HSEMEN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_HSEMEN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_BKPRAM_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_BKPRAMEN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_BKPRAMEN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          
                                        

#define __HAL_RCC_GPIOA_CLK_DISABLE()           (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOAEN)
#define __HAL_RCC_GPIOB_CLK_DISABLE()           (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOBEN)
#define __HAL_RCC_GPIOC_CLK_DISABLE()           (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOCEN)
#define __HAL_RCC_GPIOD_CLK_DISABLE()           (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIODEN)
#define __HAL_RCC_GPIOE_CLK_DISABLE()           (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOEEN)
#define __HAL_RCC_GPIOF_CLK_DISABLE()           (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOFEN)
#define __HAL_RCC_GPIOG_CLK_DISABLE()           (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOGEN)
#define __HAL_RCC_GPIOH_CLK_DISABLE()           (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOHEN)
#define __HAL_RCC_GPIOI_CLK_DISABLE()           (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOIEN)
#define __HAL_RCC_GPIOJ_CLK_DISABLE()           (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOJEN)
#define __HAL_RCC_GPIOK_CLK_DISABLE()           (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOKEN)
#define __HAL_RCC_CRC_CLK_DISABLE()             (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_CRCEN)
#define __HAL_RCC_BDMA_CLK_DISABLE()            (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_BDMAEN)
#define __HAL_RCC_ADC3_CLK_DISABLE()            (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_ADC3EN)
#define __HAL_RCC_HSEM_CLK_DISABLE()            (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_HSEMEN)
#define __HAL_RCC_BKPRAM_CLK_DISABLE()          (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_BKPRAMEN)


/** @brief  Enable or disable the APB3 peripheral clock.
  * @note   After reset, the peripheral clock (used for registers read/write access)
  *         is disabled and the application software has to enable this clock before
  *         using it.
  */

#define __HAL_RCC_LTDC_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB3ENR, RCC_APB3ENR_LTDCEN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB3ENR, RCC_APB3ENR_LTDCEN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                                                                  

                                       
#define __HAL_RCC_WWDG1_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB3ENR, RCC_APB3ENR_WWDG1EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB3ENR, RCC_APB3ENR_WWDG1EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                         

#define __HAL_RCC_LTDC_CLK_DISABLE()           (RCC->APB3ENR) &= ~ (RCC_APB3ENR_LTDCEN)
#define __HAL_RCC_WWDG1_CLK_DISABLE()          (RCC->APB3ENR) &= ~ (RCC_APB3ENR_WWDG1EN)

/** @brief  Enable or disable the APB1 peripheral clock.
  * @note   After reset, the peripheral clock (used for registers read/write access)
  *         is disabled and the application software has to enable this clock before
  *         using it.
  */
                                         
#define __HAL_RCC_TIM2_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM2EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM2EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                                                                                                                                                                                                                                                                                                                                                                                                           

#define __HAL_RCC_TIM3_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM3EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM3EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_TIM4_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM4EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM4EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_TIM5_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM5EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM5EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_TIM6_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM6EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM6EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_TIM7_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM7EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM7EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_TIM12_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM12EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM12EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_TIM13_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM13EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM13EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_TIM14_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM14EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM14EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_LPTIM1_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB1LENR, RCC_APB1LENR_LPTIM1EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_LPTIM1EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

                                       
#define __HAL_RCC_SPI2_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB1LENR, RCC_APB1LENR_SPI2EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_SPI2EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_SPI3_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB1LENR, RCC_APB1LENR_SPI3EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_SPI3EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_SPDIFRX_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB1LENR, RCC_APB1LENR_SPDIFRXEN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_SPDIFRXEN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_USART2_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB1LENR, RCC_APB1LENR_USART2EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_USART2EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_USART3_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB1LENR, RCC_APB1LENR_USART3EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_USART3EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_UART4_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB1LENR, RCC_APB1LENR_UART4EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_UART4EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_UART5_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB1LENR, RCC_APB1LENR_UART5EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_UART5EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_I2C1_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB1LENR, RCC_APB1LENR_I2C1EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_I2C1EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_I2C2_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB1LENR, RCC_APB1LENR_I2C2EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_I2C2EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_I2C3_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB1LENR, RCC_APB1LENR_I2C3EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_I2C3EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_CEC_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB1LENR, RCC_APB1LENR_CECEN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_CECEN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_DAC12_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB1LENR, RCC_APB1LENR_DAC12EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_DAC12EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_UART7_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB1LENR, RCC_APB1LENR_UART7EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_UART7EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_UART8_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB1LENR, RCC_APB1LENR_UART8EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_UART8EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_CRS_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB1HENR, RCC_APB1HENR_CRSEN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB1HENR, RCC_APB1HENR_CRSEN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_SWPMI1_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB1HENR, RCC_APB1HENR_SWPMIEN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB1HENR, RCC_APB1HENR_SWPMIEN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_OPAMP_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB1HENR, RCC_APB1HENR_OPAMPEN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB1HENR, RCC_APB1HENR_OPAMPEN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_MDIOS_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB1HENR, RCC_APB1HENR_MDIOSEN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB1HENR, RCC_APB1HENR_MDIOSEN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_FDCAN_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB1HENR, RCC_APB1HENR_FDCANEN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB1HENR, RCC_APB1HENR_FDCANEN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          


#define __HAL_RCC_TIM2_CLK_DISABLE()           (RCC->APB1LENR) &= ~ (RCC_APB1LENR_TIM2EN)
#define __HAL_RCC_TIM3_CLK_DISABLE()           (RCC->APB1LENR) &= ~ (RCC_APB1LENR_TIM3EN)
#define __HAL_RCC_TIM4_CLK_DISABLE()           (RCC->APB1LENR) &= ~ (RCC_APB1LENR_TIM4EN)
#define __HAL_RCC_TIM5_CLK_DISABLE()           (RCC->APB1LENR) &= ~ (RCC_APB1LENR_TIM5EN)
#define __HAL_RCC_TIM6_CLK_DISABLE()           (RCC->APB1LENR) &= ~ (RCC_APB1LENR_TIM6EN)
#define __HAL_RCC_TIM7_CLK_DISABLE()           (RCC->APB1LENR) &= ~ (RCC_APB1LENR_TIM7EN)
#define __HAL_RCC_TIM12_CLK_DISABLE()          (RCC->APB1LENR) &= ~ (RCC_APB1LENR_TIM12EN)
#define __HAL_RCC_TIM13_CLK_DISABLE()          (RCC->APB1LENR) &= ~ (RCC_APB1LENR_TIM13EN)
#define __HAL_RCC_TIM14_CLK_DISABLE()          (RCC->APB1LENR) &= ~ (RCC_APB1LENR_TIM14EN)
#define __HAL_RCC_LPTIM1_CLK_DISABLE()         (RCC->APB1LENR) &= ~ (RCC_APB1LENR_LPTIM1EN)
                                       
                                       
#define __HAL_RCC_SPI2_CLK_DISABLE()           (RCC->APB1LENR) &= ~ (RCC_APB1LENR_SPI2EN)
#define __HAL_RCC_SPI3_CLK_DISABLE()           (RCC->APB1LENR) &= ~ (RCC_APB1LENR_SPI3EN)
#define __HAL_RCC_SPDIFRX_CLK_DISABLE()        (RCC->APB1LENR) &= ~ (RCC_APB1LENR_SPDIFRXEN)
#define __HAL_RCC_USART2_CLK_DISABLE()         (RCC->APB1LENR) &= ~ (RCC_APB1LENR_USART2EN)
#define __HAL_RCC_USART3_CLK_DISABLE()         (RCC->APB1LENR) &= ~ (RCC_APB1LENR_USART3EN)
#define __HAL_RCC_UART4_CLK_DISABLE()          (RCC->APB1LENR) &= ~ (RCC_APB1LENR_UART4EN)
#define __HAL_RCC_UART5_CLK_DISABLE()          (RCC->APB1LENR) &= ~ (RCC_APB1LENR_UART5EN)
#define __HAL_RCC_I2C1_CLK_DISABLE()           (RCC->APB1LENR) &= ~ (RCC_APB1LENR_I2C1EN)
#define __HAL_RCC_I2C2_CLK_DISABLE()           (RCC->APB1LENR) &= ~ (RCC_APB1LENR_I2C2EN)
#define __HAL_RCC_I2C3_CLK_DISABLE()           (RCC->APB1LENR) &= ~ (RCC_APB1LENR_I2C3EN)
#define __HAL_RCC_CEC_CLK_DISABLE()            (RCC->APB1LENR) &= ~ (RCC_APB1LENR_CECEN)
#define __HAL_RCC_DAC12_CLK_DISABLE()          (RCC->APB1LENR) &= ~ (RCC_APB1LENR_DAC12EN)
#define __HAL_RCC_UART7_CLK_DISABLE()          (RCC->APB1LENR) &= ~ (RCC_APB1LENR_UART7EN)
#define __HAL_RCC_UART8_CLK_DISABLE()          (RCC->APB1LENR) &= ~ (RCC_APB1LENR_UART8EN)
#define __HAL_RCC_CRS_CLK_DISABLE()            (RCC->APB1HENR) &= ~ (RCC_APB1HENR_CRSEN)
#define __HAL_RCC_SWPMI1_CLK_DISABLE()          (RCC->APB1HENR) &= ~ (RCC_APB1HENR_SWPMIEN)
#define __HAL_RCC_OPAMP_CLK_DISABLE()          (RCC->APB1HENR) &= ~ (RCC_APB1HENR_OPAMPEN)
#define __HAL_RCC_MDIOS_CLK_DISABLE()          (RCC->APB1HENR) &= ~ (RCC_APB1HENR_MDIOSEN)
#define __HAL_RCC_FDCAN_CLK_DISABLE()          (RCC->APB1HENR) &= ~ (RCC_APB1HENR_FDCANEN)

/** @brief  Enable or disable the APB2 peripheral clock.
  * @note   After reset, the peripheral clock (used for registers read/write access)
  *         is disabled and the application software has to enable this clock before
  *         using it.
  */
                                         
#define __HAL_RCC_TIM1_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                         

#define __HAL_RCC_TIM8_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_USART1_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_USART6_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART6EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART6EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_SPI1_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_SPI4_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_TIM15_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM15EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM15EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_TIM16_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_TIM17_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_SPI5_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_SAI1_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_SAI2_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_SAI3_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI3EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI3EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_DFSDM1_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM1EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM1EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_HRTIM1_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_HRTIMEN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_HRTIMEN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_TIM1_CLK_DISABLE()           (RCC->APB2ENR) &= ~ (RCC_APB2ENR_TIM1EN)
#define __HAL_RCC_TIM8_CLK_DISABLE()           (RCC->APB2ENR) &= ~ (RCC_APB2ENR_TIM8EN)
#define __HAL_RCC_USART1_CLK_DISABLE()         (RCC->APB2ENR) &= ~ (RCC_APB2ENR_USART1EN)
#define __HAL_RCC_USART6_CLK_DISABLE()         (RCC->APB2ENR) &= ~ (RCC_APB2ENR_USART6EN)
#define __HAL_RCC_SPI1_CLK_DISABLE()           (RCC->APB2ENR) &= ~ (RCC_APB2ENR_SPI1EN)
#define __HAL_RCC_SPI4_CLK_DISABLE()           (RCC->APB2ENR) &= ~ (RCC_APB2ENR_SPI4EN)
#define __HAL_RCC_TIM15_CLK_DISABLE()          (RCC->APB2ENR) &= ~ (RCC_APB2ENR_TIM15EN)
#define __HAL_RCC_TIM16_CLK_DISABLE()          (RCC->APB2ENR) &= ~ (RCC_APB2ENR_TIM16EN)
#define __HAL_RCC_TIM17_CLK_DISABLE()          (RCC->APB2ENR) &= ~ (RCC_APB2ENR_TIM17EN)
#define __HAL_RCC_SPI5_CLK_DISABLE()           (RCC->APB2ENR) &= ~ (RCC_APB2ENR_SPI5EN)
#define __HAL_RCC_SAI1_CLK_DISABLE()           (RCC->APB2ENR) &= ~ (RCC_APB2ENR_SAI1EN)
#define __HAL_RCC_SAI2_CLK_DISABLE()           (RCC->APB2ENR) &= ~ (RCC_APB2ENR_SAI2EN)
#define __HAL_RCC_SAI3_CLK_DISABLE()           (RCC->APB2ENR) &= ~ (RCC_APB2ENR_SAI3EN)
#define __HAL_RCC_DFSDM1_CLK_DISABLE()         (RCC->APB2ENR) &= ~ (RCC_APB2ENR_DFSDM1EN)
#define __HAL_RCC_HRTIM1_CLK_DISABLE()         (RCC->APB2ENR) &= ~ (RCC_APB2ENR_HRTIMEN)

/** @brief  Enable or disable the APB4 peripheral clock.
  * @note   After reset, the peripheral clock (used for registers read/write access)
  *         is disabled and the application software has to enable this clock before
  *         using it.
  */
                                         
#define __HAL_RCC_SYSCFG_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB4ENR, RCC_APB4ENR_SYSCFGEN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB4ENR, RCC_APB4ENR_SYSCFGEN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                         

#define __HAL_RCC_LPUART1_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB4ENR, RCC_APB4ENR_LPUART1EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB4ENR, RCC_APB4ENR_LPUART1EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_SPI6_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB4ENR, RCC_APB4ENR_SPI6EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB4ENR, RCC_APB4ENR_SPI6EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_I2C4_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB4ENR, RCC_APB4ENR_I2C4EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB4ENR, RCC_APB4ENR_I2C4EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_LPTIM2_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB4ENR, RCC_APB4ENR_LPTIM2EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB4ENR, RCC_APB4ENR_LPTIM2EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_LPTIM3_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB4ENR, RCC_APB4ENR_LPTIM3EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB4ENR, RCC_APB4ENR_LPTIM3EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_LPTIM4_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB4ENR, RCC_APB4ENR_LPTIM4EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB4ENR, RCC_APB4ENR_LPTIM4EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_LPTIM5_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB4ENR, RCC_APB4ENR_LPTIM5EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB4ENR, RCC_APB4ENR_LPTIM5EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_COMP12_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB4ENR, RCC_APB4ENR_COMP12EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB4ENR, RCC_APB4ENR_COMP12EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_VREF_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB4ENR, RCC_APB4ENR_VREFEN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB4ENR, RCC_APB4ENR_VREFEN);\
                                        UNUSED(tmpreg); \
                                       } while(0)  
                                         
#define __HAL_RCC_SAI4_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB4ENR, RCC_APB4ENR_SAI4EN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB4ENR, RCC_APB4ENR_SAI4EN);\
                                        UNUSED(tmpreg); \
                                       } while(0)                                          

#define __HAL_RCC_RTC_CLK_ENABLE()   do { \
                                        __IO uint32_t tmpreg; \
                                        SET_BIT(RCC->APB4ENR, RCC_APB4ENR_RTCAPBEN);\
                                        /* Delay after an RCC peripheral clock enabling */ \
                                        tmpreg = READ_BIT(RCC->APB4ENR, RCC_APB4ENR_RTCAPBEN);\
                                        UNUSED(tmpreg); \
                                       } while(0)  
                                         

#define __HAL_RCC_SYSCFG_CLK_DISABLE()           (RCC->APB4ENR) &= ~ (RCC_APB4ENR_SYSCFGEN)
#define __HAL_RCC_LPUART1_CLK_DISABLE()          (RCC->APB4ENR) &= ~ (RCC_APB4ENR_LPUART1EN)
#define __HAL_RCC_SPI6_CLK_DISABLE()             (RCC->APB4ENR) &= ~ (RCC_APB4ENR_SPI6EN)
#define __HAL_RCC_I2C4_CLK_DISABLE()             (RCC->APB4ENR) &= ~ (RCC_APB4ENR_I2C4EN)
#define __HAL_RCC_LPTIM2_CLK_DISABLE()           (RCC->APB4ENR) &= ~ (RCC_APB4ENR_LPTIM2EN)
#define __HAL_RCC_LPTIM3_CLK_DISABLE()           (RCC->APB4ENR) &= ~ (RCC_APB4ENR_LPTIM3EN)
#define __HAL_RCC_LPTIM4_CLK_DISABLE()           (RCC->APB4ENR) &= ~ (RCC_APB4ENR_LPTIM4EN)
#define __HAL_RCC_LPTIM5_CLK_DISABLE()           (RCC->APB4ENR) &= ~ (RCC_APB4ENR_LPTIM5EN)
#define __HAL_RCC_COMP12_CLK_DISABLE()           (RCC->APB4ENR) &= ~ (RCC_APB4ENR_COMP12EN)
#define __HAL_RCC_VREF_CLK_DISABLE()             (RCC->APB4ENR) &= ~ (RCC_APB4ENR_VREFEN) 
#define __HAL_RCC_RTC_CLK_DISABLE()              (RCC->APB4ENR) &= ~ (RCC_APB4ENR_RTCAPBEN)                                         
#define __HAL_RCC_SAI4_CLK_DISABLE()             (RCC->APB4ENR) &= ~ (RCC_APB4ENR_SAI4EN)

                                       
                                                                                                                                                                                                                                                                                                                                                                                                                           
/** @brief  Enable or disable the AHB3 peripheral reset.
  */

#define __HAL_RCC_AHB3_FORCE_RESET()          (RCC->AHB3RSTR = 0xFFFFFFFF)
#define __HAL_RCC_MDMA_FORCE_RESET()            (RCC->AHB3RSTR |= (RCC_AHB3RSTR_MDMARST))
#define __HAL_RCC_DMA2D_FORCE_RESET()           (RCC->AHB3RSTR |= (RCC_AHB3RSTR_DMA2DRST))
#define __HAL_RCC_JPGDECRST_FORCE_RESET()       (RCC->AHB3RSTR |= (RCC_AHB3RSTR_JPGDECRST))
#define __HAL_RCC_FMC_FORCE_RESET()             (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FMCRST))
#define __HAL_RCC_QSPI_FORCE_RESET()            (RCC->AHB3RSTR |= (RCC_AHB3RSTR_QSPIRST))
#define __HAL_RCC_SDMMC1_FORCE_RESET()          (RCC->AHB3RSTR |= (RCC_AHB3RSTR_SDMMC1RST))
#define __HAL_RCC_CPU_FORCE_RESET()            (RCC->AHB3RSTR |= (RCC_AHB3RSTR_CPURST))


#define __HAL_RCC_AHB3_RELEASE_RESET()        (RCC->AHB3RSTR = 0x00)
#define __HAL_RCC_MDMA_RELEASE_RESET()          (RCC->AHB3RSTR &= ~ (RCC_AHB3RSTR_MDMARST))
#define __HAL_RCC_DMA2D_RELEASE_RESET()         (RCC->AHB3RSTR &= ~ (RCC_AHB3RSTR_DMA2DRST))
#define __HAL_RCC_JPGDECRST_RELEASE_RESET()     (RCC->AHB3RSTR &= ~ (RCC_AHB3RSTR_JPGDECRST))
#define __HAL_RCC_FMC_RELEASE_RESET()           (RCC->AHB3RSTR &= ~ (RCC_AHB3RSTR_FMCRST))
#define __HAL_RCC_QSPI_RELEASE_RESET()          (RCC->AHB3RSTR &= ~ (RCC_AHB3RSTR_QSPIRST))
#define __HAL_RCC_SDMMC1_RELEASE_RESET()        (RCC->AHB3RSTR &= ~ (RCC_AHB3RSTR_SDMMC1RST))
#define __HAL_RCC_CPU_RELEASE_RESET()          (RCC->AHB3RSTR &= ~ (RCC_AHB3RSTR_CPURST))



/** @brief  Force or release the AHB1 peripheral reset.
  */
#define __HAL_RCC_AHB1_FORCE_RESET()           (RCC->AHB1RSTR = 0xFFFFFFFF)
#define __HAL_RCC_DMA1_FORCE_RESET()             (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA1RST))
#define __HAL_RCC_DMA2_FORCE_RESET()             (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA2RST))
#define __HAL_RCC_ADC12_FORCE_RESET()            (RCC->AHB1RSTR |= (RCC_AHB1RSTR_ADC12RST))
#define __HAL_RCC_ETH1MAC_FORCE_RESET()          (RCC->AHB1RSTR |= (RCC_AHB1RSTR_ETH1MACRST))
#define __HAL_RCC_USB1_OTG_HS_FORCE_RESET()      (RCC->AHB1RSTR |= (RCC_AHB1RSTR_USB1OTGHSRST))
#define __HAL_RCC_USB2_OTG_FS_FORCE_RESET()      (RCC->AHB1RSTR |= (RCC_AHB1RSTR_USB2OTGHSRST))


#define __HAL_RCC_AHB1_RELEASE_RESET()           (RCC->AHB1RSTR = 0x00)
#define __HAL_RCC_DMA1_RELEASE_RESET()             (RCC->AHB1RSTR &= ~ (RCC_AHB1RSTR_DMA1RST))
#define __HAL_RCC_DMA2_RELEASE_RESET()             (RCC->AHB1RSTR &= ~ (RCC_AHB1RSTR_DMA2RST))
#define __HAL_RCC_ADC12_RELEASE_RESET()            (RCC->AHB1RSTR &= ~ (RCC_AHB1RSTR_ADC12RST))
#define __HAL_RCC_ETH1MAC_RELEASE_RESET()          (RCC->AHB1RSTR &= ~ (RCC_AHB1RSTR_ETH1MACRST))
#define __HAL_RCC_USB1_OTG_HS_RELEASE_RESET()      (RCC->AHB1RSTR &= ~ (RCC_AHB1RSTR_USB1OTGHSRST))
#define __HAL_RCC_USB2_OTG_FS_RELEASE_RESET()      (RCC->AHB1RSTR &= ~ (RCC_AHB1RSTR_USB2OTGHSRST))


/** @brief  Force or release the AHB2 peripheral reset.
  */
#define __HAL_RCC_AHB2_FORCE_RESET()           (RCC->AHB2RSTR = 0xFFFFFFFF)
#define __HAL_RCC_DCMI_FORCE_RESET()             (RCC->AHB2RSTR |= (RCC_AHB2RSTR_DCMIRST))
#define __HAL_RCC_CRYP_FORCE_RESET()             (RCC->AHB2RSTR |= (RCC_AHB2RSTR_CRYPRST))
#define __HAL_RCC_HASH_FORCE_RESET()             (RCC->AHB2RSTR |= (RCC_AHB2RSTR_HASHRST))
#define __HAL_RCC_RNG_FORCE_RESET()              (RCC->AHB2RSTR |= (RCC_AHB2RSTR_RNGRST))
#define __HAL_RCC_SDMMC2_FORCE_RESET()           (RCC->AHB2RSTR |= (RCC_AHB2RSTR_SDMMC2RST))

#define __HAL_RCC_AHB2_RELEASE_RESET()           (RCC->AHB2RSTR = 0x00)
#define __HAL_RCC_DCMI_RELEASE_RESET()             (RCC->AHB2RSTR &= ~ (RCC_AHB2RSTR_DCMIRST))
#define __HAL_RCC_CRYP_RELEASE_RESET()             (RCC->AHB2RSTR &= ~ (RCC_AHB2RSTR_CRYPRST))
#define __HAL_RCC_HASH_RELEASE_RESET()             (RCC->AHB2RSTR &= ~ (RCC_AHB2RSTR_HASHRST))
#define __HAL_RCC_RNG_RELEASE_RESET()              (RCC->AHB2RSTR &= ~ (RCC_AHB2RSTR_RNGRST))
#define __HAL_RCC_SDMMC2_RELEASE_RESET()           (RCC->AHB2RSTR &= ~ (RCC_AHB2RSTR_SDMMC2RST))


/** @brief  Force or release the AHB4 peripheral reset.
  */

#define __HAL_RCC_AHB4_FORCE_RESET()          (RCC->AHB4RSTR = 0xFFFFFFFF)
#define __HAL_RCC_GPIOA_FORCE_RESET()           (RCC->AHB4RSTR) |= (RCC_AHB4RSTR_GPIOARST)
#define __HAL_RCC_GPIOB_FORCE_RESET()           (RCC->AHB4RSTR) |= (RCC_AHB4RSTR_GPIOBRST)
#define __HAL_RCC_GPIOC_FORCE_RESET()           (RCC->AHB4RSTR) |= (RCC_AHB4RSTR_GPIOCRST)
#define __HAL_RCC_GPIOD_FORCE_RESET()           (RCC->AHB4RSTR) |= (RCC_AHB4RSTR_GPIODRST)
#define __HAL_RCC_GPIOE_FORCE_RESET()           (RCC->AHB4RSTR) |= (RCC_AHB4RSTR_GPIOERST)
#define __HAL_RCC_GPIOF_FORCE_RESET()           (RCC->AHB4RSTR) |= (RCC_AHB4RSTR_GPIOFRST)
#define __HAL_RCC_GPIOG_FORCE_RESET()           (RCC->AHB4RSTR) |= (RCC_AHB4RSTR_GPIOGRST)
#define __HAL_RCC_GPIOH_FORCE_RESET()           (RCC->AHB4RSTR) |= (RCC_AHB4RSTR_GPIOHRST)
#define __HAL_RCC_GPIOI_FORCE_RESET()           (RCC->AHB4RSTR) |= (RCC_AHB4RSTR_GPIOIRST)
#define __HAL_RCC_GPIOJ_FORCE_RESET()           (RCC->AHB4RSTR) |= (RCC_AHB4RSTR_GPIOJRST)
#define __HAL_RCC_GPIOK_FORCE_RESET()           (RCC->AHB4RSTR) |= (RCC_AHB4RSTR_GPIOKRST)
#define __HAL_RCC_PWR_FORCE_RESET()             (RCC->AHB4RSTR) |= (RCC_AHB4RSTR_PWRRST)
#define __HAL_RCC_CRC_FORCE_RESET()             (RCC->AHB4RSTR) |= (RCC_AHB4RSTR_CRCRST)
#define __HAL_RCC_BDMA_FORCE_RESET()            (RCC->AHB4RSTR) |= (RCC_AHB4RSTR_BDMARST)
#define __HAL_RCC_ADC3_FORCE_RESET()            (RCC->AHB4RSTR) |= (RCC_AHB4RSTR_ADC3RST)
#define __HAL_RCC_HSEM_FORCE_RESET()            (RCC->AHB4RSTR) |= (RCC_AHB4RSTR_HSEMRST)

#define __HAL_RCC_AHB4_RELEASE_RESET()          (RCC->AHB4RSTR = 0x00)
#define __HAL_RCC_GPIOA_RELEASE_RESET()           (RCC->AHB4RSTR) &= ~ (RCC_AHB4RSTR_GPIOARST)
#define __HAL_RCC_GPIOB_RELEASE_RESET()           (RCC->AHB4RSTR) &= ~ (RCC_AHB4RSTR_GPIOBRST)
#define __HAL_RCC_GPIOC_RELEASE_RESET()           (RCC->AHB4RSTR) &= ~ (RCC_AHB4RSTR_GPIOCRST)
#define __HAL_RCC_GPIOD_RELEASE_RESET()           (RCC->AHB4RSTR) &= ~ (RCC_AHB4RSTR_GPIODRST)
#define __HAL_RCC_GPIOE_RELEASE_RESET()           (RCC->AHB4RSTR) &= ~ (RCC_AHB4RSTR_GPIOERST)
#define __HAL_RCC_GPIOF_RELEASE_RESET()           (RCC->AHB4RSTR) &= ~ (RCC_AHB4RSTR_GPIOFRST)
#define __HAL_RCC_GPIOG_RELEASE_RESET()           (RCC->AHB4RSTR) &= ~ (RCC_AHB4RSTR_GPIOGRST)
#define __HAL_RCC_GPIOH_RELEASE_RESET()           (RCC->AHB4RSTR) &= ~ (RCC_AHB4RSTR_GPIOHRST)
#define __HAL_RCC_GPIOI_RELEASE_RESET()           (RCC->AHB4RSTR) &= ~ (RCC_AHB4RSTR_GPIOIRST)
#define __HAL_RCC_GPIOJ_RELEASE_RESET()           (RCC->AHB4RSTR) &= ~ (RCC_AHB4RSTR_GPIOJRST)
#define __HAL_RCC_GPIOK_RELEASE_RESET()           (RCC->AHB4RSTR) &= ~ (RCC_AHB4RSTR_GPIOKRST)
#define __HAL_RCC_PWR_RELEASE_RESET()             (RCC->AHB4RSTR) &= ~ (RCC_AHB4RSTR_PWRRST)
#define __HAL_RCC_CRC_RELEASE_RESET()             (RCC->AHB4RSTR) &= ~ (RCC_AHB4RSTR_CRCRST)
#define __HAL_RCC_BDMA_RELEASE_RESET()            (RCC->AHB4RSTR) &= ~ (RCC_AHB4RSTR_BDMARST)
#define __HAL_RCC_ADC3_RELEASE_RESET()            (RCC->AHB4RSTR) &= ~ (RCC_AHB4RSTR_ADC3RST)
#define __HAL_RCC_HSEM_RELEASE_RESET()            (RCC->AHB4RSTR) &= ~ (RCC_AHB4RSTR_HSEMRST)


/** @brief  Force or release the APB3 peripheral reset.
  */
#define __HAL_RCC_APB3_FORCE_RESET()         (RCC->APB3RSTR = 0xFFFFFFFF)
#define __HAL_RCC_LTDC_FORCE_RESET()           (RCC->APB3RSTR) |= (RCC_APB3RSTR_LTDCRST)

#define __HAL_RCC_APB3_RELEASE_RESET()         (RCC->APB3RSTR = 0x00)
#define __HAL_RCC_LTDC_RELEASE_RESET()           (RCC->APB3RSTR) &= ~ (RCC_APB3RSTR_LTDCRST)


/** @brief  Force or release the APB1 peripheral reset.
  */
#define __HAL_RCC_APB1L_FORCE_RESET()        (RCC->APB1LRSTR = 0xFFFFFFFF)
#define __HAL_RCC_APB1H_FORCE_RESET()        (RCC->APB1HRSTR = 0xFFFFFFFF)                                         
#define __HAL_RCC_TIM2_FORCE_RESET()           (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_TIM2RST)
#define __HAL_RCC_TIM3_FORCE_RESET()           (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_TIM3RST)
#define __HAL_RCC_TIM4_FORCE_RESET()           (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_TIM4RST)
#define __HAL_RCC_TIM5_FORCE_RESET()           (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_TIM5RST)
#define __HAL_RCC_TIM6_FORCE_RESET()           (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_TIM6RST)
#define __HAL_RCC_TIM7_FORCE_RESET()           (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_TIM7RST)
#define __HAL_RCC_TIM12_FORCE_RESET()          (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_TIM12RST)
#define __HAL_RCC_TIM13_FORCE_RESET()          (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_TIM13RST)
#define __HAL_RCC_TIM14_FORCE_RESET()          (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_TIM14RST)
#define __HAL_RCC_LPTIM1_FORCE_RESET()         (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_LPTIM1RST)
#define __HAL_RCC_SPI2_FORCE_RESET()           (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_SPI2RST)
#define __HAL_RCC_SPI3_FORCE_RESET()           (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_SPI3RST)
#define __HAL_RCC_SPDIFRX_FORCE_RESET()        (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_SPDIFRXRST)
#define __HAL_RCC_USART2_FORCE_RESET()         (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_USART2RST)
#define __HAL_RCC_USART3_FORCE_RESET()         (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_USART3RST)
#define __HAL_RCC_UART4_FORCE_RESET()          (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_UART4RST)
#define __HAL_RCC_UART5_FORCE_RESET()          (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_UART5RST)
#define __HAL_RCC_I2C1_FORCE_RESET()           (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_I2C1RST)
#define __HAL_RCC_I2C2_FORCE_RESET()           (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_I2C2RST)
#define __HAL_RCC_I2C3_FORCE_RESET()           (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_I2C3RST)
#define __HAL_RCC_CEC_FORCE_RESET()            (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_CECRST)
#define __HAL_RCC_DAC12_FORCE_RESET()          (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_DAC12RST)
#define __HAL_RCC_UART7_FORCE_RESET()          (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_UART7RST)
#define __HAL_RCC_UART8_FORCE_RESET()          (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_UART8RST)
#define __HAL_RCC_CRS_FORCE_RESET()            (RCC->APB1HRSTR) |= (RCC_APB1HRSTR_CRSRST)
#define __HAL_RCC_SWPMI1_FORCE_RESET()          (RCC->APB1HRSTR) |= (RCC_APB1HRSTR_SWPMIRST)
#define __HAL_RCC_OPAMP_FORCE_RESET()          (RCC->APB1HRSTR) |= (RCC_APB1HRSTR_OPAMPRST)
#define __HAL_RCC_MDIOS_FORCE_RESET()          (RCC->APB1HRSTR) |= (RCC_APB1HRSTR_MDIOSRST)
#define __HAL_RCC_FDCAN_FORCE_RESET()          (RCC->APB1HRSTR) |= (RCC_APB1HRSTR_FDCANRST)

#define __HAL_RCC_APB1L_RELEASE_RESET()       (RCC->APB1LRSTR = 0x00)
#define __HAL_RCC_APB1H_RELEASE_RESET()       (RCC->APB1HRSTR = 0x00)
#define __HAL_RCC_TIM2_RELEASE_RESET()           (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_TIM2RST)
#define __HAL_RCC_TIM3_RELEASE_RESET()           (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_TIM3RST)
#define __HAL_RCC_TIM4_RELEASE_RESET()           (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_TIM4RST)
#define __HAL_RCC_TIM5_RELEASE_RESET()           (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_TIM5RST)
#define __HAL_RCC_TIM6_RELEASE_RESET()           (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_TIM6RST)
#define __HAL_RCC_TIM7_RELEASE_RESET()           (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_TIM7RST)
#define __HAL_RCC_TIM12_RELEASE_RESET()          (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_TIM12RST)
#define __HAL_RCC_TIM13_RELEASE_RESET()          (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_TIM13RST)
#define __HAL_RCC_TIM14_RELEASE_RESET()          (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_TIM14RST)
#define __HAL_RCC_LPTIM1_RELEASE_RESET()         (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_LPTIM1RST)
#define __HAL_RCC_SPI2_RELEASE_RESET()           (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_SPI2RST)
#define __HAL_RCC_SPI3_RELEASE_RESET()           (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_SPI3RST)
#define __HAL_RCC_SPDIFRX_RELEASE_RESET()        (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_SPDIFRXRST)
#define __HAL_RCC_USART2_RELEASE_RESET()         (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_USART2RST)
#define __HAL_RCC_USART3_RELEASE_RESET()         (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_USART3RST)
#define __HAL_RCC_UART4_RELEASE_RESET()          (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_UART4RST)
#define __HAL_RCC_UART5_RELEASE_RESET()          (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_UART5RST)
#define __HAL_RCC_I2C1_RELEASE_RESET()           (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_I2C1RST)
#define __HAL_RCC_I2C2_RELEASE_RESET()           (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_I2C2RST)
#define __HAL_RCC_I2C3_RELEASE_RESET()           (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_I2C3RST)
#define __HAL_RCC_CEC_RELEASE_RESET()            (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_CECRST)
#define __HAL_RCC_DAC12_RELEASE_RESET()          (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_DAC12RST)
#define __HAL_RCC_UART7_RELEASE_RESET()          (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_UART7RST)
#define __HAL_RCC_UART8_RELEASE_RESET()          (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_UART8RST)
#define __HAL_RCC_CRS_RELEASE_RESET()            (RCC->APB1HRSTR) &= ~ (RCC_APB1HRSTR_CRSRST)
#define __HAL_RCC_SWPMI1_RELEASE_RESET()          (RCC->APB1HRSTR) &= ~ (RCC_APB1HRSTR_SWPMIRST)
#define __HAL_RCC_OPAMP_RELEASE_RESET()          (RCC->APB1HRSTR) &= ~ (RCC_APB1HRSTR_OPAMPRST)
#define __HAL_RCC_MDIOS_RELEASE_RESET()          (RCC->APB1HRSTR) &= ~ (RCC_APB1HRSTR_MDIOSRST)
#define __HAL_RCC_FDCAN_RELEASE_RESET()          (RCC->APB1HRSTR) &= ~ (RCC_APB1HRSTR_FDCANRST)

/** @brief  Force or release the APB2 peripheral reset.
  */
#define __HAL_RCC_APB2_FORCE_RESET()         (RCC->APB2RSTR = 0xFFFFFFFF)                                         
#define __HAL_RCC_TIM1_FORCE_RESET()           (RCC->APB2RSTR) |= (RCC_APB2RSTR_TIM1RST)
#define __HAL_RCC_TIM8_FORCE_RESET()           (RCC->APB2RSTR) |= (RCC_APB2RSTR_TIM8RST)
#define __HAL_RCC_USART1_FORCE_RESET()         (RCC->APB2RSTR) |= (RCC_APB2RSTR_USART1RST)
#define __HAL_RCC_USART6_FORCE_RESET()         (RCC->APB2RSTR) |= (RCC_APB2RSTR_USART6RST)
#define __HAL_RCC_SPI1_FORCE_RESET()           (RCC->APB2RSTR) |= (RCC_APB2RSTR_SPI1RST)
#define __HAL_RCC_SPI4_FORCE_RESET()           (RCC->APB2RSTR) |= (RCC_APB2RSTR_SPI4RST)
#define __HAL_RCC_TIM15_FORCE_RESET()          (RCC->APB2RSTR) |= (RCC_APB2RSTR_TIM15RST)
#define __HAL_RCC_TIM16_FORCE_RESET()          (RCC->APB2RSTR) |= (RCC_APB2RSTR_TIM16RST)
#define __HAL_RCC_TIM17_FORCE_RESET()          (RCC->APB2RSTR) |= (RCC_APB2RSTR_TIM17RST)
#define __HAL_RCC_SPI5_FORCE_RESET()           (RCC->APB2RSTR) |= (RCC_APB2RSTR_SPI5RST)
#define __HAL_RCC_SAI1_FORCE_RESET()           (RCC->APB2RSTR) |= (RCC_APB2RSTR_SAI1RST)
#define __HAL_RCC_SAI2_FORCE_RESET()           (RCC->APB2RSTR) |= (RCC_APB2RSTR_SAI2RST)
#define __HAL_RCC_SAI3_FORCE_RESET()           (RCC->APB2RSTR) |= (RCC_APB2RSTR_SAI3RST)
#define __HAL_RCC_DFSDM1_FORCE_RESET()         (RCC->APB2RSTR) |= (RCC_APB2RSTR_DFSDM1RST)
#define __HAL_RCC_HRTIM1_FORCE_RESET()         (RCC->APB2RSTR) |= (RCC_APB2RSTR_HRTIMRST)

#define __HAL_RCC_APB2_RELEASE_RESET()         (RCC->APB2RSTR = 0x00)
#define __HAL_RCC_TIM1_RELEASE_RESET()           (RCC->APB2RSTR) &= ~ (RCC_APB2RSTR_TIM1RST)
#define __HAL_RCC_TIM8_RELEASE_RESET()           (RCC->APB2RSTR) &= ~ (RCC_APB2RSTR_TIM8RST)
#define __HAL_RCC_USART1_RELEASE_RESET()         (RCC->APB2RSTR) &= ~ (RCC_APB2RSTR_USART1RST)
#define __HAL_RCC_USART6_RELEASE_RESET()         (RCC->APB2RSTR) &= ~ (RCC_APB2RSTR_USART6RST)
#define __HAL_RCC_SPI1_RELEASE_RESET()           (RCC->APB2RSTR) &= ~ (RCC_APB2RSTR_SPI1RST)
#define __HAL_RCC_SPI4_RELEASE_RESET()           (RCC->APB2RSTR) &= ~ (RCC_APB2RSTR_SPI4RST)
#define __HAL_RCC_TIM15_RELEASE_RESET()          (RCC->APB2RSTR) &= ~ (RCC_APB2RSTR_TIM15RST)
#define __HAL_RCC_TIM16_RELEASE_RESET()          (RCC->APB2RSTR) &= ~ (RCC_APB2RSTR_TIM16RST)
#define __HAL_RCC_TIM17_RELEASE_RESET()          (RCC->APB2RSTR) &= ~ (RCC_APB2RSTR_TIM17RST)
#define __HAL_RCC_SPI5_RELEASE_RESET()           (RCC->APB2RSTR) &= ~ (RCC_APB2RSTR_SPI5RST)
#define __HAL_RCC_SAI1_RELEASE_RESET()           (RCC->APB2RSTR) &= ~ (RCC_APB2RSTR_SAI1RST)
#define __HAL_RCC_SAI2_RELEASE_RESET()           (RCC->APB2RSTR) &= ~ (RCC_APB2RSTR_SAI2RST)
#define __HAL_RCC_SAI3_RELEASE_RESET()           (RCC->APB2RSTR) &= ~ (RCC_APB2RSTR_SAI3RST)
#define __HAL_RCC_DFSDM1_RELEASE_RESET()         (RCC->APB2RSTR) &= ~ (RCC_APB2RSTR_DFSDM1RST)
#define __HAL_RCC_HRTIM1_RELEASE_RESET()         (RCC->APB2RSTR) &= ~ (RCC_APB2RSTR_HRTIMRST)

/** @brief  Force or release the APB4 peripheral reset.
  */

#define __HAL_RCC_APB4_FORCE_RESET()           (RCC->APB4RSTR = 0xFFFFFFFF)                                         
#define __HAL_RCC_SYSCFG_FORCE_RESET()           (RCC->APB4RSTR) |= (RCC_APB4RSTR_SYSCFGRST)
#define __HAL_RCC_LPUART1_FORCE_RESET()          (RCC->APB4RSTR) |= (RCC_APB4RSTR_LPUART1RST)
#define __HAL_RCC_SPI6_FORCE_RESET()             (RCC->APB4RSTR) |= (RCC_APB4RSTR_SPI6RST)
#define __HAL_RCC_I2C4_FORCE_RESET()             (RCC->APB4RSTR) |= (RCC_APB4RSTR_I2C4RST)
#define __HAL_RCC_LPTIM2_FORCE_RESET()           (RCC->APB4RSTR) |= (RCC_APB4RSTR_LPTIM2RST)
#define __HAL_RCC_LPTIM3_FORCE_RESET()           (RCC->APB4RSTR) |= (RCC_APB4RSTR_LPTIM3RST)
#define __HAL_RCC_LPTIM4_FORCE_RESET()           (RCC->APB4RSTR) |= (RCC_APB4RSTR_LPTIM4RST)
#define __HAL_RCC_LPTIM5_FORCE_RESET()           (RCC->APB4RSTR) |= (RCC_APB4RSTR_LPTIM5RST)
#define __HAL_RCC_COMP12_FORCE_RESET()           (RCC->APB4RSTR) |= (RCC_APB4RSTR_COMP12RST)
#define __HAL_RCC_VREF_FORCE_RESET()             (RCC->APB4RSTR) |= (RCC_APB4RSTR_VREFRST)                                        
#define __HAL_RCC_SAI4_FORCE_RESET()             (RCC->APB4RSTR) |= (RCC_APB4RSTR_SAI4RST)


#define __HAL_RCC_APB4_RELEASE_RESET()           (RCC->APB4RSTR = 0x00)
#define __HAL_RCC_SYSCFG_RELEASE_RESET()           (RCC->APB4RSTR) &= ~ (RCC_APB4RSTR_SYSCFGRST)
#define __HAL_RCC_LPUART1_RELEASE_RESET()          (RCC->APB4RSTR) &= ~ (RCC_APB4RSTR_LPUART1RST)
#define __HAL_RCC_SPI6_RELEASE_RESET()             (RCC->APB4RSTR) &= ~ (RCC_APB4RSTR_SPI6RST)
#define __HAL_RCC_I2C4_RELEASE_RESET()             (RCC->APB4RSTR) &= ~ (RCC_APB4RSTR_I2C4RST)
#define __HAL_RCC_LPTIM2_RELEASE_RESET()           (RCC->APB4RSTR) &= ~ (RCC_APB4RSTR_LPTIM2RST)
#define __HAL_RCC_LPTIM3_RELEASE_RESET()           (RCC->APB4RSTR) &= ~ (RCC_APB4RSTR_LPTIM3RST)
#define __HAL_RCC_LPTIM4_RELEASE_RESET()           (RCC->APB4RSTR) &= ~ (RCC_APB4RSTR_LPTIM4RST)
#define __HAL_RCC_LPTIM5_RELEASE_RESET()           (RCC->APB4RSTR) &= ~ (RCC_APB4RSTR_LPTIM5RST)
#define __HAL_RCC_COMP12_RELEASE_RESET()           (RCC->APB4RSTR) &= ~ (RCC_APB4RSTR_COMP12RST)
#define __HAL_RCC_VREF_RELEASE_RESET()             (RCC->APB4RSTR) &= ~ (RCC_APB4RSTR_VREFRST)                                         
#define __HAL_RCC_SAI4_RELEASE_RESET()             (RCC->APB4RSTR) &= ~ (RCC_APB4RSTR_SAI4RST)


/** @brief  Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode.
  * @note   Peripheral clock gating in SLEEP mode can be used to further reduce
  *         power consumption.
  * @note   After wakeup from SLEEP mode, the peripheral clock is enabled again.
  * @note   By default, all peripheral clocks are enabled during SLEEP mode.
  */


#define __HAL_RCC_MDMA_CLK_SLEEP_ENABLE()            (RCC->AHB3LPENR |= (RCC_AHB3LPENR_MDMALPEN))
#define __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE()           (RCC->AHB3LPENR |= (RCC_AHB3LPENR_DMA2DLPEN))
#define __HAL_RCC_JPGDEC_CLK_SLEEP_ENABLE()          (RCC->AHB3LPENR |= (RCC_AHB3LPENR_JPGDECLPEN))
#define __HAL_RCC_FLASH_CLK_SLEEP_ENABLE()           (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FLASHLPEN))
#define __HAL_RCC_FMC_CLK_SLEEP_ENABLE()             (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FMCLPEN))
#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE()            (RCC->AHB3LPENR |= (RCC_AHB3LPENR_QSPILPEN))
#define __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE()          (RCC->AHB3LPENR |= (RCC_AHB3LPENR_SDMMC1LPEN))
#define __HAL_RCC_DTCM1_CLK_SLEEP_ENABLE()           (RCC->AHB3LPENR |= (RCC_AHB3LPENR_DTCM1LPEN))
#define __HAL_RCC_DTCM2_CLK_SLEEP_ENABLE()           (RCC->AHB3LPENR |= (RCC_AHB3LPENR_DTCM2LPEN))
#define __HAL_RCC_ITCM_CLK_SLEEP_ENABLE()            (RCC->AHB3LPENR |= (RCC_AHB3LPENR_ITCMLPEN))
#define __HAL_RCC_D1SRAM1_CLK_SLEEP_ENABLE()         (RCC->AHB3LPENR |= (RCC_AHB3LPENR_AXISRAMLPEN))


#define __HAL_RCC_MDMA_CLK_SLEEP_DISABLE()            (RCC->AHB3LPENR &= ~ (RCC_AHB3LPENR_MDMALPEN))
#define __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE()           (RCC->AHB3LPENR &= ~ (RCC_AHB3LPENR_DMA2DLPEN))
#define __HAL_RCC_JPGDEC_CLK_SLEEP_DISABLE()          (RCC->AHB3LPENR &= ~ (RCC_AHB3LPENR_JPGDECLPEN))
#define __HAL_RCC_FLASH_CLK_SLEEP_DISABLE()           (RCC->AHB3LPENR &= ~ (RCC_AHB3LPENR_FLASHLPEN))
#define __HAL_RCC_FMC_CLK_SLEEP_DISABLE()             (RCC->AHB3LPENR &= ~ (RCC_AHB3LPENR_FMCLPEN))
#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE()            (RCC->AHB3LPENR &= ~ (RCC_AHB3LPENR_QSPILPEN))
#define __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE()          (RCC->AHB3LPENR &= ~ (RCC_AHB3LPENR_SDMMC1LPEN))
#define __HAL_RCC_DTCM1_CLK_SLEEP_DISABLE()           (RCC->AHB3LPENR &= ~ (RCC_AHB3LPENR_DTCM1LPEN))
#define __HAL_RCC_DTCM2_CLK_SLEEP_DISABLE()           (RCC->AHB3LPENR &= ~ (RCC_AHB3LPENR_DTCM2LPEN))
#define __HAL_RCC_ITCM_CLK_SLEEP_DISABLE()            (RCC->AHB3LPENR &= ~ (RCC_AHB3LPENR_ITCMLPEN))
#define __HAL_RCC_D1SRAM1_CLK_SLEEP_DISABLE()         (RCC->AHB3LPENR &= ~ (RCC_AHB3LPENR_AXISRAMLPEN))



/** @brief  ENABLE or disable the AHB1 peripheral clock during Low Power (Sleep) mode.
  * @note   Peripheral clock gating in SLEEP mode can be used to further reduce
  *         power consumption.
  * @note   After wakeup from SLEEP mode, the peripheral clock is ENABLEd again.
  * @note   By default, all peripheral clocks are ENABLEd during SLEEP mode.
  */

#define __HAL_RCC_DMA1_CLK_SLEEP_ENABLE()             (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA1LPEN))
#define __HAL_RCC_DMA2_CLK_SLEEP_ENABLE()             (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA2LPEN))
#define __HAL_RCC_ADC12_CLK_SLEEP_ENABLE()            (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ADC12LPEN))
#define __HAL_RCC_ETH1MAC_CLK_SLEEP_ENABLE()          (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETH1MACLPEN))
#define __HAL_RCC_ETH1TX_CLK_SLEEP_ENABLE()           (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETH1TXLPEN))
#define __HAL_RCC_ETH1RX_CLK_SLEEP_ENABLE()           (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETH1RXLPEN))
#define __HAL_RCC_ETH1PTP_CLK_SLEEP_ENABLE()          (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETH1PTPLPEN))
#define __HAL_RCC_USB1_OTG_HS_CLK_SLEEP_ENABLE()      (RCC->AHB1LPENR |= (RCC_AHB1LPENR_USB1OTGHSLPEN))
#define __HAL_RCC_USB1_OTG_HS_ULPI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_USB1OTGHSULPILPEN))
#define __HAL_RCC_USB2_OTG_FS_CLK_SLEEP_ENABLE()      (RCC->AHB1LPENR |= (RCC_AHB1LPENR_USB2OTGHSLPEN))
#define __HAL_RCC_USB2_OTG_FS_ULPI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_USB2OTGHSULPILPEN))

#define __HAL_RCC_DMA1_CLK_SLEEP_DISABLE()             (RCC->AHB1LPENR &= ~ (RCC_AHB1LPENR_DMA1LPEN))
#define __HAL_RCC_DMA2_CLK_SLEEP_DISABLE()             (RCC->AHB1LPENR &= ~ (RCC_AHB1LPENR_DMA2LPEN))
#define __HAL_RCC_ADC12_CLK_SLEEP_DISABLE()            (RCC->AHB1LPENR &= ~ (RCC_AHB1LPENR_ADC12LPEN))
#define __HAL_RCC_ETH1MAC_CLK_SLEEP_DISABLE()          (RCC->AHB1LPENR &= ~ (RCC_AHB1LPENR_ETH1MACLPEN))
#define __HAL_RCC_ETH1TX_CLK_SLEEP_DISABLE()           (RCC->AHB1LPENR &= ~ (RCC_AHB1LPENR_ETH1TXLPEN))
#define __HAL_RCC_ETH1RX_CLK_SLEEP_DISABLE()           (RCC->AHB1LPENR &= ~ (RCC_AHB1LPENR_ETH1RXLPEN))
#define __HAL_RCC_ETH1PTP_CLK_SLEEP_DISABLE()          (RCC->AHB1LPENR &= ~ (RCC_AHB1LPENR_ETH1PTPLPEN))
#define __HAL_RCC_USB1_OTG_HS_CLK_SLEEP_DISABLE()      (RCC->AHB1LPENR &= ~ (RCC_AHB1LPENR_USB1OTGHSLPEN))
#define __HAL_RCC_USB1_OTG_HS_ULPI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~ (RCC_AHB1LPENR_USB1OTGHSULPILPEN))
#define __HAL_RCC_USB2_OTG_FS_CLK_SLEEP_DISABLE()      (RCC->AHB1LPENR &= ~ (RCC_AHB1LPENR_USB2OTGHSLPEN))
#define __HAL_RCC_USB2_OTG_FS_ULPI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~ (RCC_AHB1LPENR_USB2OTGHSULPILPEN))

/** @brief  ENABLE or disable the AHB2 peripheral clock during Low Power (Sleep) mode.
  * @note   Peripheral clock gating in SLEEP mode can be used to further reduce
  *         power consumption.
  * @note   After wakeup from SLEEP mode, the peripheral clock is ENABLEd again.
  * @note   By default, all peripheral clocks are ENABLEd during SLEEP mode.
  */

#define __HAL_RCC_DCMI_CLK_SLEEP_ENABLE()             (RCC->AHB2LPENR |= (RCC_AHB2LPENR_DCMILPEN))
#define __HAL_RCC_CRYP_CLK_SLEEP_ENABLE()             (RCC->AHB2LPENR |= (RCC_AHB2LPENR_CRYPLPEN))
#define __HAL_RCC_HASH_CLK_SLEEP_ENABLE()             (RCC->AHB2LPENR |= (RCC_AHB2LPENR_HASHLPEN))
#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE()              (RCC->AHB2LPENR |= (RCC_AHB2LPENR_RNGLPEN))
#define __HAL_RCC_SDMMC2_CLK_SLEEP_ENABLE()           (RCC->AHB2LPENR |= (RCC_AHB2LPENR_SDMMC2LPEN))
#define __HAL_RCC_D2SRAM1_CLK_SLEEP_ENABLE()          (RCC->AHB2LPENR |= (RCC_AHB2LPENR_D2SRAM1LPEN))
#define __HAL_RCC_D2SRAM2_CLK_SLEEP_ENABLE()          (RCC->AHB2LPENR |= (RCC_AHB2LPENR_D2SRAM2LPEN))
#define __HAL_RCC_D2SRAM3_CLK_SLEEP_ENABLE()          (RCC->AHB2LPENR |= (RCC_AHB2LPENR_D2SRAM3LPEN))

#define __HAL_RCC_DCMI_CLK_SLEEP_DISABLE()             (RCC->AHB2LPENR &= ~ (RCC_AHB2LPENR_DCMILPEN))
#define __HAL_RCC_CRYP_CLK_SLEEP_DISABLE()             (RCC->AHB2LPENR &= ~ (RCC_AHB2LPENR_CRYPLPEN))
#define __HAL_RCC_HASH_CLK_SLEEP_DISABLE()             (RCC->AHB2LPENR &= ~ (RCC_AHB2LPENR_HASHLPEN))
#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE()              (RCC->AHB2LPENR &= ~ (RCC_AHB2LPENR_RNGLPEN))
#define __HAL_RCC_SDMMC2_CLK_SLEEP_DISABLE()           (RCC->AHB2LPENR &= ~ (RCC_AHB2LPENR_SDMMC2LPEN))
#define __HAL_RCC_D2SRAM1_CLK_SLEEP_DISABLE()          (RCC->AHB2LPENR &= ~ (RCC_AHB2LPENR_D2SRAM1LPEN))
#define __HAL_RCC_D2SRAM2_CLK_SLEEP_DISABLE()          (RCC->AHB2LPENR &= ~ (RCC_AHB2LPENR_D2SRAM2LPEN))
#define __HAL_RCC_D2SRAM3_CLK_SLEEP_DISABLE()          (RCC->AHB2LPENR &= ~ (RCC_AHB2LPENR_D2SRAM3LPEN))

/** @brief  ENABLE or disable the AHB4 peripheral clock during Low Power (Sleep) mode.
  * @note   Peripheral clock gating in SLEEP mode can be used to further reduce
  *         power consumption.
  * @note   After wakeup from SLEEP mode, the peripheral clock is ENABLEd again.
  * @note   By default, all peripheral clocks are ENABLEd during SLEEP mode.
  */

#define __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE()           (RCC->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOALPEN)
#define __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE()           (RCC->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOBLPEN)
#define __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE()           (RCC->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOCLPEN)
#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE()           (RCC->AHB4LPENR) |= (RCC_AHB4LPENR_GPIODLPEN)
#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE()           (RCC->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOELPEN)
#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE()           (RCC->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOFLPEN)
#define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE()           (RCC->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOGLPEN)
#define __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE()           (RCC->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOHLPEN)
#define __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE()           (RCC->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOILPEN)
#define __HAL_RCC_GPIOJ_CLK_SLEEP_ENABLE()           (RCC->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOJLPEN)
#define __HAL_RCC_GPIOK_CLK_SLEEP_ENABLE()           (RCC->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOKLPEN)
#define __HAL_RCC_PWR_CLK_SLEEP_ENABLE()             (RCC->AHB4LPENR) |= (RCC_AHB4LPENR_PWRLPEN)
#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE()             (RCC->AHB4LPENR) |= (RCC_AHB4LPENR_CRCLPEN)
#define __HAL_RCC_BDMA_CLK_SLEEP_ENABLE()            (RCC->AHB4LPENR) |= (RCC_AHB4LPENR_BDMALPEN)
#define __HAL_RCC_ADC3_CLK_SLEEP_ENABLE()            (RCC->AHB4LPENR) |= (RCC_AHB4LPENR_ADC3LPEN)
#define __HAL_RCC_BKPRAM_CLK_SLEEP_ENABLE()          (RCC->AHB4LPENR) |= (RCC_AHB4LPENR_BKPRAMLPEN)
#define __HAL_RCC_D3SRAM1_CLK_SLEEP_ENABLE()         (RCC->AHB4LPENR  |= (RCC_AHB4LPENR_D3SRAM1LPEN))

#define __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE()           (RCC->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOALPEN)
#define __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE()           (RCC->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOBLPEN)
#define __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE()           (RCC->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOCLPEN)
#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE()           (RCC->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIODLPEN)
#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE()           (RCC->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOELPEN)
#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE()           (RCC->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOFLPEN)
#define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE()           (RCC->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOGLPEN)
#define __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE()           (RCC->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOHLPEN)
#define __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE()           (RCC->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOILPEN)
#define __HAL_RCC_GPIOJ_CLK_SLEEP_DISABLE()           (RCC->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOJLPEN)
#define __HAL_RCC_GPIOK_CLK_SLEEP_DISABLE()           (RCC->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOKLPEN)
#define __HAL_RCC_PWR_CLK_SLEEP_DISABLE()             (RCC->AHB4LPENR) &= ~ (RCC_AHB4LPENR_PWRLPEN)
#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE()             (RCC->AHB4LPENR) &= ~ (RCC_AHB4LPENR_CRCLPEN)
#define __HAL_RCC_BDMA_CLK_SLEEP_DISABLE()            (RCC->AHB4LPENR) &= ~ (RCC_AHB4LPENR_BDMALPEN)
#define __HAL_RCC_ADC3_CLK_SLEEP_DISABLE()            (RCC->AHB4LPENR) &= ~ (RCC_AHB4LPENR_ADC3LPEN)
#define __HAL_RCC_BKPRAM_CLK_SLEEP_DISABLE()          (RCC->AHB4LPENR) &= ~ (RCC_AHB4LPENR_BKPRAMLPEN)
#define __HAL_RCC_D3SRAM1_CLK_SLEEP_DISABLE()         (RCC->AHB4LPENR  &= ~ (RCC_AHB4LPENR_D3SRAM1LPEN))

/** @brief  ENABLE or disable the APB3 peripheral clock during Low Power (Sleep) mode.
  * @note   Peripheral clock gating in SLEEP mode can be used to further reduce
  *         power consumption.
  * @note   After wakeup from SLEEP mode, the peripheral clock is ENABLEd again.
  * @note   By default, all peripheral clocks are ENABLEd during SLEEP mode.
  */

#define __HAL_RCC_LTDC_CLK_SLEEP_ENABLE()           (RCC->APB3LPENR) |= (RCC_APB3LPENR_LTDCLPEN)
#define __HAL_RCC_WWDG1_CLK_SLEEP_ENABLE()          (RCC->APB3LPENR) |= (RCC_APB3LPENR_WWDG1LPEN)

#define __HAL_RCC_LTDC_CLK_SLEEP_DISABLE()           (RCC->APB3LPENR) &= ~ (RCC_APB3LPENR_LTDCLPEN)

#define __HAL_RCC_WWDG1_CLK_SLEEP_DISABLE()          (RCC->APB3LPENR) &= ~ (RCC_APB3LPENR_WWDG1LPEN)

/** @brief  ENABLE or disable the APB1 peripheral clock during Low Power (Sleep) mode.
  * @note   Peripheral clock gating in SLEEP mode can be used to further reduce
  *         power consumption.
  * @note   After wakeup from SLEEP mode, the peripheral clock is ENABLEd again.
  * @note   By default, all peripheral clocks are ENABLEd during SLEEP mode.
  */
                                         
#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE()           (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_TIM2LPEN)
#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE()           (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_TIM3LPEN)
#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE()           (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_TIM4LPEN)
#define __HAL_RCC_TIM5_CLK_SLEEP_ENABLE()           (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_TIM5LPEN)
#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE()           (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_TIM6LPEN)
#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE()           (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_TIM7LPEN)
#define __HAL_RCC_TIM12_CLK_SLEEP_ENABLE()          (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_TIM12LPEN)
#define __HAL_RCC_TIM13_CLK_SLEEP_ENABLE()          (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_TIM13LPEN)
#define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE()          (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_TIM14LPEN)
#define __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE()         (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_LPTIM1LPEN)


#define __HAL_RCC_SPI2_CLK_SLEEP_ENABLE()           (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_SPI2LPEN)
#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE()           (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_SPI3LPEN)
#define __HAL_RCC_SPDIFRX_CLK_SLEEP_ENABLE()        (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_SPDIFRXLPEN)
#define __HAL_RCC_USART2_CLK_SLEEP_ENABLE()         (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_USART2LPEN)
#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE()         (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_USART3LPEN)
#define __HAL_RCC_UART4_CLK_SLEEP_ENABLE()          (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_UART4LPEN)
#define __HAL_RCC_UART5_CLK_SLEEP_ENABLE()          (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_UART5LPEN)
#define __HAL_RCC_I2C1_CLK_SLEEP_ENABLE()           (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_I2C1LPEN)
#define __HAL_RCC_I2C2_CLK_SLEEP_ENABLE()           (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_I2C2LPEN)
#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE()           (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_I2C3LPEN)
#define __HAL_RCC_CEC_CLK_SLEEP_ENABLE()            (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_CECLPEN)
#define __HAL_RCC_DAC12_CLK_SLEEP_ENABLE()          (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_DAC12LPEN)
#define __HAL_RCC_UART7_CLK_SLEEP_ENABLE()          (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_UART7LPEN)
#define __HAL_RCC_UART8_CLK_SLEEP_ENABLE()          (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_UART8LPEN)
#define __HAL_RCC_CRS_CLK_SLEEP_ENABLE()            (RCC->APB1HLPENR) |= (RCC_APB1HLPENR_CRSLPEN)
#define __HAL_RCC_SWPMI1_CLK_SLEEP_ENABLE()          (RCC->APB1HLPENR) |= (RCC_APB1HLPENR_SWPMILPEN)
#define __HAL_RCC_OPAMP_CLK_SLEEP_ENABLE()          (RCC->APB1HLPENR) |= (RCC_APB1HLPENR_OPAMPLPEN)
#define __HAL_RCC_MDIOS_CLK_SLEEP_ENABLE()          (RCC->APB1HLPENR) |= (RCC_APB1HLPENR_MDIOSLPEN)
#define __HAL_RCC_FDCAN_CLK_SLEEP_ENABLE()          (RCC->APB1HLPENR) |= (RCC_APB1HLPENR_FDCANLPEN)


#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE()           (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM2LPEN)
#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE()           (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM3LPEN)
#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE()           (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM4LPEN)
#define __HAL_RCC_TIM5_CLK_SLEEP_DISABLE()           (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM5LPEN)
#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE()           (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM6LPEN)
#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE()           (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM7LPEN)
#define __HAL_RCC_TIM12_CLK_SLEEP_DISABLE()          (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM12LPEN)
#define __HAL_RCC_TIM13_CLK_SLEEP_DISABLE()          (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM13LPEN)
#define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE()          (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM14LPEN)
#define __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE()         (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_LPTIM1LPEN)


#define __HAL_RCC_SPI2_CLK_SLEEP_DISABLE()           (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_SPI2LPEN)
#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE()           (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_SPI3LPEN)
#define __HAL_RCC_SPDIFRX_CLK_SLEEP_DISABLE()        (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_SPDIFRXLPEN)
#define __HAL_RCC_USART2_CLK_SLEEP_DISABLE()         (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_USART2LPEN)
#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE()         (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_USART3LPEN)
#define __HAL_RCC_UART4_CLK_SLEEP_DISABLE()          (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_UART4LPEN)
#define __HAL_RCC_UART5_CLK_SLEEP_DISABLE()          (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_UART5LPEN)
#define __HAL_RCC_I2C1_CLK_SLEEP_DISABLE()           (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_I2C1LPEN)
#define __HAL_RCC_I2C2_CLK_SLEEP_DISABLE()           (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_I2C2LPEN)
#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE()           (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_I2C3LPEN)
#define __HAL_RCC_CEC_CLK_SLEEP_DISABLE()            (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_CECLPEN)
#define __HAL_RCC_DAC12_CLK_SLEEP_DISABLE()          (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_DAC12LPEN)
#define __HAL_RCC_UART7_CLK_SLEEP_DISABLE()          (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_UART7LPEN)
#define __HAL_RCC_UART8_CLK_SLEEP_DISABLE()          (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_UART8LPEN)
#define __HAL_RCC_CRS_CLK_SLEEP_DISABLE()            (RCC->APB1HLPENR) &= ~ (RCC_APB1HLPENR_CRSLPEN)
#define __HAL_RCC_SWPMI1_CLK_SLEEP_DISABLE()          (RCC->APB1HLPENR) &= ~ (RCC_APB1HLPENR_SWPMILPEN)
#define __HAL_RCC_OPAMP_CLK_SLEEP_DISABLE()          (RCC->APB1HLPENR) &= ~ (RCC_APB1HLPENR_OPAMPLPEN)
#define __HAL_RCC_MDIOS_CLK_SLEEP_DISABLE()          (RCC->APB1HLPENR) &= ~ (RCC_APB1HLPENR_MDIOSLPEN)
#define __HAL_RCC_FDCAN_CLK_SLEEP_DISABLE()          (RCC->APB1HLPENR) &= ~ (RCC_APB1HLPENR_FDCANLPEN)

/** @brief  ENABLE or disable the APB2 peripheral clock during Low Power (Sleep) mode.
  * @note   Peripheral clock gating in SLEEP mode can be used to further reduce
  *         power consumption.
  * @note   After wakeup from SLEEP mode, the peripheral clock is ENABLEd again.
  * @note   By default, all peripheral clocks are ENABLEd during SLEEP mode.
  */
                                         
#define __HAL_RCC_TIM1_CLK_SLEEP_ENABLE()           (RCC->APB2LPENR) |= (RCC_APB2LPENR_TIM1LPEN)
#define __HAL_RCC_TIM8_CLK_SLEEP_ENABLE()           (RCC->APB2LPENR) |= (RCC_APB2LPENR_TIM8LPEN)
#define __HAL_RCC_USART1_CLK_SLEEP_ENABLE()         (RCC->APB2LPENR) |= (RCC_APB2LPENR_USART1LPEN)
#define __HAL_RCC_USART6_CLK_SLEEP_ENABLE()         (RCC->APB2LPENR) |= (RCC_APB2LPENR_USART6LPEN)
#define __HAL_RCC_SPI1_CLK_SLEEP_ENABLE()           (RCC->APB2LPENR) |= (RCC_APB2LPENR_SPI1LPEN)
#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE()           (RCC->APB2LPENR) |= (RCC_APB2LPENR_SPI4LPEN)
#define __HAL_RCC_TIM15_CLK_SLEEP_ENABLE()          (RCC->APB2LPENR) |= (RCC_APB2LPENR_TIM15LPEN)
#define __HAL_RCC_TIM16_CLK_SLEEP_ENABLE()          (RCC->APB2LPENR) |= (RCC_APB2LPENR_TIM16LPEN)
#define __HAL_RCC_TIM17_CLK_SLEEP_ENABLE()          (RCC->APB2LPENR) |= (RCC_APB2LPENR_TIM17LPEN)
#define __HAL_RCC_SPI5_CLK_SLEEP_ENABLE()           (RCC->APB2LPENR) |= (RCC_APB2LPENR_SPI5LPEN)
#define __HAL_RCC_SAI1_CLK_SLEEP_ENABLE()           (RCC->APB2LPENR) |= (RCC_APB2LPENR_SAI1LPEN)
#define __HAL_RCC_SAI2_CLK_SLEEP_ENABLE()           (RCC->APB2LPENR) |= (RCC_APB2LPENR_SAI2LPEN)
#define __HAL_RCC_SAI3_CLK_SLEEP_ENABLE()           (RCC->APB2LPENR) |= (RCC_APB2LPENR_SAI3LPEN)
#define __HAL_RCC_DFSDM1_CLK_SLEEP_ENABLE()         (RCC->APB2LPENR) |= (RCC_APB2LPENR_DFSDM1LPEN)
#define __HAL_RCC_HRTIM1_CLK_SLEEP_ENABLE()         (RCC->APB2LPENR) |= (RCC_APB2LPENR_HRTIMLPEN)

#define __HAL_RCC_TIM1_CLK_SLEEP_DISABLE()           (RCC->APB2LPENR) &= ~ (RCC_APB2LPENR_TIM1LPEN)
#define __HAL_RCC_TIM8_CLK_SLEEP_DISABLE()           (RCC->APB2LPENR) &= ~ (RCC_APB2LPENR_TIM8LPEN)
#define __HAL_RCC_USART1_CLK_SLEEP_DISABLE()         (RCC->APB2LPENR) &= ~ (RCC_APB2LPENR_USART1LPEN)
#define __HAL_RCC_USART6_CLK_SLEEP_DISABLE()         (RCC->APB2LPENR) &= ~ (RCC_APB2LPENR_USART6LPEN)
#define __HAL_RCC_SPI1_CLK_SLEEP_DISABLE()           (RCC->APB2LPENR) &= ~ (RCC_APB2LPENR_SPI1LPEN)
#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE()           (RCC->APB2LPENR) &= ~ (RCC_APB2LPENR_SPI4LPEN)
#define __HAL_RCC_TIM15_CLK_SLEEP_DISABLE()          (RCC->APB2LPENR) &= ~ (RCC_APB2LPENR_TIM15LPEN)
#define __HAL_RCC_TIM16_CLK_SLEEP_DISABLE()          (RCC->APB2LPENR) &= ~ (RCC_APB2LPENR_TIM16LPEN)
#define __HAL_RCC_TIM17_CLK_SLEEP_DISABLE()          (RCC->APB2LPENR) &= ~ (RCC_APB2LPENR_TIM17LPEN)
#define __HAL_RCC_SPI5_CLK_SLEEP_DISABLE()           (RCC->APB2LPENR) &= ~ (RCC_APB2LPENR_SPI5LPEN)
#define __HAL_RCC_SAI1_CLK_SLEEP_DISABLE()           (RCC->APB2LPENR) &= ~ (RCC_APB2LPENR_SAI1LPEN)
#define __HAL_RCC_SAI2_CLK_SLEEP_DISABLE()           (RCC->APB2LPENR) &= ~ (RCC_APB2LPENR_SAI2LPEN)
#define __HAL_RCC_SAI3_CLK_SLEEP_DISABLE()           (RCC->APB2LPENR) &= ~ (RCC_APB2LPENR_SAI3LPEN)
#define __HAL_RCC_DFSDM1_CLK_SLEEP_DISABLE()         (RCC->APB2LPENR) &= ~ (RCC_APB2LPENR_DFSDM1LPEN)
#define __HAL_RCC_HRTIM1_CLK_SLEEP_DISABLE()         (RCC->APB2LPENR) &= ~ (RCC_APB2LPENR_HRTIMLPEN)

/** @brief  ENABLE or disable the APB4 peripheral clock during Low Power (Sleep) mode.
  * @note   Peripheral clock gating in SLEEP mode can be used to further reduce
  *         power consumption.
  * @note   After wakeup from SLEEP mode, the peripheral clock is ENABLEd again.
  * @note   By default, all peripheral clocks are ENABLEd during SLEEP mode.
  */
                                         
#define __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE()           (RCC->APB4LPENR) |= (RCC_APB4LPENR_SYSCFGLPEN)
#define __HAL_RCC_LPUART1_CLK_SLEEP_ENABLE()          (RCC->APB4LPENR) |= (RCC_APB4LPENR_LPUART1LPEN)
#define __HAL_RCC_SPI6_CLK_SLEEP_ENABLE()             (RCC->APB4LPENR) |= (RCC_APB4LPENR_SPI6LPEN)
#define __HAL_RCC_I2C4_CLK_SLEEP_ENABLE()             (RCC->APB4LPENR) |= (RCC_APB4LPENR_I2C4LPEN)
#define __HAL_RCC_LPTIM2_CLK_SLEEP_ENABLE()           (RCC->APB4LPENR) |= (RCC_APB4LPENR_LPTIM2LPEN)
#define __HAL_RCC_LPTIM3_CLK_SLEEP_ENABLE()           (RCC->APB4LPENR) |= (RCC_APB4LPENR_LPTIM3LPEN)
#define __HAL_RCC_LPTIM4_CLK_SLEEP_ENABLE()           (RCC->APB4LPENR) |= (RCC_APB4LPENR_LPTIM4LPEN)
#define __HAL_RCC_LPTIM5_CLK_SLEEP_ENABLE()           (RCC->APB4LPENR) |= (RCC_APB4LPENR_LPTIM5LPEN)
#define __HAL_RCC_COMP12_CLK_SLEEP_ENABLE()           (RCC->APB4LPENR) |= (RCC_APB4LPENR_COMP12LPEN)
#define __HAL_RCC_VREF_CLK_SLEEP_ENABLE()             (RCC->APB4LPENR) |= (RCC_APB4LPENR_VREFLPEN) 
#define __HAL_RCC_RTC_CLK_SLEEP_ENABLE()              (RCC->APB4LPENR) |= (RCC_APB4LPENR_RTCAPBLPEN)                                         
#define __HAL_RCC_SAI4_CLK_SLEEP_ENABLE()             (RCC->APB4LPENR) |= (RCC_APB4LPENR_SAI4LPEN)


#define __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE()           (RCC->APB4LPENR) &= ~ (RCC_APB4LPENR_SYSCFGLPEN)
#define __HAL_RCC_LPUART1_CLK_SLEEP_DISABLE()          (RCC->APB4LPENR) &= ~ (RCC_APB4LPENR_LPUART1LPEN)
#define __HAL_RCC_SPI6_CLK_SLEEP_DISABLE()             (RCC->APB4LPENR) &= ~ (RCC_APB4LPENR_SPI6LPEN)
#define __HAL_RCC_I2C4_CLK_SLEEP_DISABLE()             (RCC->APB4LPENR) &= ~ (RCC_APB4LPENR_I2C4LPEN)
#define __HAL_RCC_LPTIM2_CLK_SLEEP_DISABLE()           (RCC->APB4LPENR) &= ~ (RCC_APB4LPENR_LPTIM2LPEN)
#define __HAL_RCC_LPTIM3_CLK_SLEEP_DISABLE()           (RCC->APB4LPENR) &= ~ (RCC_APB4LPENR_LPTIM3LPEN)
#define __HAL_RCC_LPTIM4_CLK_SLEEP_DISABLE()           (RCC->APB4LPENR) &= ~ (RCC_APB4LPENR_LPTIM4LPEN)
#define __HAL_RCC_LPTIM5_CLK_SLEEP_DISABLE()           (RCC->APB4LPENR) &= ~ (RCC_APB4LPENR_LPTIM5LPEN)
#define __HAL_RCC_COMP12_CLK_SLEEP_DISABLE()           (RCC->APB4LPENR) &= ~ (RCC_APB4LPENR_COMP12LPEN)
#define __HAL_RCC_VREF_CLK_SLEEP_DISABLE()             (RCC->APB4LPENR) &= ~ (RCC_APB4LPENR_VREFLPEN)
#define __HAL_RCC_RTC_CLK_SLEEP_DISABLE()              (RCC->APB4LPENR) &= ~ (RCC_APB4LPENR_RTCAPBLPEN)    
#define __HAL_RCC_SAI4_CLK_SLEEP_DISABLE()             (RCC->APB4LPENR) &= ~ (RCC_APB4LPENR_SAI4LPEN)



/** @brief  Enable or disable peripheral bus clock  when D3 domain is in DRUN
  * @note   After reset, peripheral  clock is disabled when CPU is in CSTOP
  */

#define __HAL_RCC_BDMA_CLKAM_ENABLE()             (RCC->D3AMR) |= (RCC_D3AMR_BDMAAMEN)
#define __HAL_RCC_LPUART1_CLKAM_ENABLE()          (RCC->D3AMR) |= (RCC_D3AMR_LPUART1AMEN)
#define __HAL_RCC_SPI6_CLKAM_ENABLE()             (RCC->D3AMR) |= (RCC_D3AMR_SPI6AMEN)
#define __HAL_RCC_I2C4_CLKAM_ENABLE()             (RCC->D3AMR) |= (RCC_D3AMR_I2C4AMEN)
#define __HAL_RCC_LPTIM2_CLKAM_ENABLE()           (RCC->D3AMR) |= (RCC_D3AMR_LPTIM2AMEN)
#define __HAL_RCC_LPTIM3_CLKAM_ENABLE()           (RCC->D3AMR) |= (RCC_D3AMR_LPTIM3AMEN)
#define __HAL_RCC_LPTIM4_CLKAM_ENABLE()           (RCC->D3AMR) |= (RCC_D3AMR_LPTIM4AMEN)
#define __HAL_RCC_LPTIM5_CLKAM_ENABLE()           (RCC->D3AMR) |= (RCC_D3AMR_LPTIM5AMEN)
#define __HAL_RCC_COMP12_CLKAM_ENABLE()           (RCC->D3AMR) |= (RCC_D3AMR_COMP12AMEN)
#define __HAL_RCC_VREF_CLKAM_ENABLE()             (RCC->D3AMR) |= (RCC_D3AMR_VREFAMEN)
#define __HAL_RCC_RTC_CLKAM_ENABLE()              (RCC->D3AMR) |= (RCC_D3AMR_RTCAMEN)
#define __HAL_RCC_CRC_CLKAM_ENABLE()              (RCC->D3AMR) |= (RCC_D3AMR_CRCAMEN)
#define __HAL_RCC_SAI4_CLKAM_ENABLE()             (RCC->D3AMR) |= (RCC_D3AMR_SAI4AMEN)
#define __HAL_RCC_ADC3_CLKAM_ENABLE()             (RCC->D3AMR) |= (RCC_D3AMR_ADC3AMEN)


#define __HAL_RCC_BKPRAM_CLKAM_ENABLE()           (RCC->D3AMR) |= (RCC_D3AMR_BKPRAMAMEN)
#define __HAL_RCC_D3SRAM1_CLKAM_ENABLE()          (RCC->D3AMR) |= (RCC_D3AMR_SRAM4AMEN)

#define __HAL_RCC_BDMA_CLKAM_DISABLE()             (RCC->D3AMR) &= ~ (RCC_D3AMR_BDMAAMEN)
#define __HAL_RCC_LPUART1_CLKAM_DISABLE()          (RCC->D3AMR) &= ~ (RCC_D3AMR_LPUART1AMEN)
#define __HAL_RCC_SPI6_CLKAM_DISABLE()             (RCC->D3AMR) &= ~ (RCC_D3AMR_SPI6AMEN)
#define __HAL_RCC_I2C4_CLKAM_DISABLE()             (RCC->D3AMR) &= ~ (RCC_D3AMR_I2C4AMEN)
#define __HAL_RCC_LPTIM2_CLKAM_DISABLE()           (RCC->D3AMR) &= ~ (RCC_D3AMR_LPTIM2AMEN)
#define __HAL_RCC_LPTIM3_CLKAM_DISABLE()           (RCC->D3AMR) &= ~ (RCC_D3AMR_LPTIM3AMEN)
#define __HAL_RCC_LPTIM4_CLKAM_DISABLE()           (RCC->D3AMR) &= ~ (RCC_D3AMR_LPTIM4AMEN)
#define __HAL_RCC_LPTIM5_CLKAM_DISABLE()           (RCC->D3AMR) &= ~ (RCC_D3AMR_LPTIM5AMEN)
#define __HAL_RCC_COMP12_CLKAM_DISABLE()           (RCC->D3AMR) &= ~ (RCC_D3AMR_COMP12AMEN)
#define __HAL_RCC_VREF_CLKAM_DISABLE()             (RCC->D3AMR) &= ~ (RCC_D3AMR_VREFAMEN)
#define __HAL_RCC_RTC_CLKAM_DISABLE()              (RCC->D3AMR) &= ~(RCC_D3AMR_RTCAMEN)
#define __HAL_RCC_CRC_CLKAM_DISABLE()              (RCC->D3AMR) &= ~(RCC_D3AMR_CRCAMEN)
#define __HAL_RCC_SAI4_CLKAM_DISABLE()             (RCC->D3AMR) &= ~(RCC_D3AMR_SAI4AMEN)
#define __HAL_RCC_ADC3_CLKAM_DISABLE()             (RCC->D3AMR) &= ~(RCC_D3AMR_ADC3AMEN)


#define __HAL_RCC_BKPRAM_CLKAM_DISABLE()           (RCC->D3AMR) &= ~ (RCC_D3AMR_BKPRAMAMEN)
#define __HAL_RCC_D3SRAM1_CLKAM_DISABLE()          (RCC->D3AMR)&= ~ (RCC_D3AMR_SRAM4AMEN)


/** @brief  Macro to enable or disable the Internal High Speed oscillator (HSI).
  * @note     After enabling the HSI, the application software should wait on 
  *           HSIRDY flag to be set indicating that HSI clock is stable and can
  *           be used to clock the PLL and/or system clock.
  * @note     HSI can not be stopped if it is used directly or through the PLL
  *           as system clock. In this case, you have to select another source 
  *           of the system clock then stop the HSI.
  * @note     The HSI is stopped by hardware when entering STOP and STANDBY modes. 
  * @param    __STATE__ specifies the new state of the HSI.
  *           This parameter can be one of the following values:
  *            @arg RCC_HSI_OFF turn OFF the HSI oscillator
  *            @arg RCC_HSI_ON turn ON the HSI oscillator
  *            @arg RCC_HSI_DIV1 turn ON the HSI oscillator and divide it by 1 (default after reset)
  *            @arg RCC_HSI_DIV2 turn ON the HSI oscillator and divide it by 2
  *            @arg RCC_HSI_DIV4 turn ON the HSI oscillator and divide it by 4
  *            @arg RCC_HSI_DIV8 turn ON the HSI oscillator and divide it by 8
  * @note   When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator
  *         clock cycles. 
  */
#define __HAL_RCC_HSI_CONFIG(__STATE__) \
                  MODIFY_REG(RCC->CR, RCC_CR_HSION | RCC_CR_HSIDIV , (uint32_t)(__STATE__))


/** @brief  Macro to get the HSI divider.
  * @retval The HSI divider. The returned value can be one
  *         of the following:
  *            - RCC_CR_HSIDIV_1  HSI oscillator divided by 1 (default after reset)
  *            - RCC_CR_HSIDIV_2  HSI oscillator divided by 2
  *            - RCC_CR_HSIDIV_4  HSI oscillator divided by 4
  *            - RCC_CR_HSIDIV_8  HSI oscillator divided by 8
  */
#define __HAL_RCC_GET_HSI_DIVIDER() ((uint32_t)(READ_BIT(RCC->CR, RCC_CR_HSIDIV)))

/** @brief  Macros to enable or disable the Internal High Speed oscillator (HSI).
  * @note   The HSI is stopped by hardware when entering STOP and STANDBY modes.
  *         It is used (enabled by hardware) as system clock source after start-up
  *         from Reset, wakeup from STOP and STANDBY mode, or in case of failure
  *         of the HSE used directly or indirectly as system clock (if the Clock
  *         Security System CSS is enabled).
  * @note   HSI can not be stopped if it is used as system clock source. In this case,
  *         you have to select another source of the system clock then stop the HSI.
  * @note   After enabling the HSI, the application software should wait on HSIRDY
  *         flag to be set indicating that HSI clock is stable and can be used as
  *         system clock source.
  *         This parameter can be: ENABLE or DISABLE.
  * @note   When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator
  *         clock cycles.
  */
#define __HAL_RCC_HSI_ENABLE()  SET_BIT(RCC->CR, RCC_CR_HSION)
#define __HAL_RCC_HSI_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_HSION)


/** @brief  Macro to adjust the Internal High Speed oscillator (HSI) calibration value.
  * @note   The calibration is used to compensate for the variations in voltage
  *         and temperature that influence the frequency of the internal HSI RC.
  * @param  __HSICalibrationValue__: specifies the calibration trimming value.
  *         This parameter must be a number between 0 and 0x3F.
  */
#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(__HSICalibrationValue__) \
                  MODIFY_REG(RCC->ICSCR, RCC_ICSCR_HSITRIM, (uint32_t)(__HSICalibrationValue__) << POSITION_VAL(RCC_ICSCR_HSITRIM))

/**
  * @brief    Macros to enable or disable the force of the Internal High Speed oscillator (HSI)
  *           in STOP mode to be quickly available as kernel clock for some peripherals.
  * @note     Keeping the HSI ON in STOP mode allows to avoid slowing down the communication
  *           speed because of the HSI start-up time.
  * @note     The enable of this function has not effect on the HSION bit.
  *           This parameter can be: ENABLE or DISABLE.
  * @retval None
  */
#define __HAL_RCC_HSISTOP_ENABLE()     SET_BIT(RCC->CR, RCC_CR_HSIKERON)
#define __HAL_RCC_HSISTOP_DISABLE()    CLEAR_BIT(RCC->CR, RCC_CR_HSIKERON)


/**
  * @brief  Macro to enable or disable the Internal High Speed oscillator for USB (HSI48).
  * @note   After enabling the HSI48, the application software should wait on 
  *         HSI48RDY flag to be set indicating that HSI48 clock is stable and can
  *         be used to clock the USB.
  * @note   The HSI48 is stopped by hardware when entering STOP and STANDBY modes.
  */
#define __HAL_RCC_HSI48_ENABLE()    SET_BIT(RCC->CR, RCC_CR_HSI48ON);   
                                   
#define __HAL_RCC_HSI48_DISABLE()   CLEAR_BIT(RCC->CR, RCC_CR_HSI48ON);   
                                                   
/**
  * @brief  Macros to enable or disable the Internal  oscillator (CSI).
  * @note     The CSI is stopped by hardware when entering STOP and STANDBY modes.
  *           It is used (enabled by hardware) as system clock source after
  *           start-up from Reset, wakeup from STOP and STANDBY mode, or in case
  *           of failure of the HSE used directly or indirectly as system clock
  *           (if the Clock Security System CSS is enabled).
  * @note     CSI can not be stopped if it is used as system clock source.
  *           In this case, you have to select another source of the system
  *           clock then stop the CSI.
  * @note     After enabling the CSI, the application software should wait on
  *           CSIRDY flag to be set indicating that CSI clock is stable and can
  *           be used as system clock source.
  * @note     When the CSI is stopped, CSIRDY flag goes low after 6 CSI oscillator
  *           clock cycles.
  */
#define __HAL_RCC_CSI_ENABLE()  SET_BIT(RCC->CR, RCC_CR_CSION)
#define __HAL_RCC_CSI_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_CSION)

/** @brief  Macro Adjusts the Internal  oscillator (CSI) calibration value.
  * @note   The calibration is used to compensate for the variations in voltage
  *         and temperature that influence the frequency of the internal CSI RC.
  * @param  __CSICalibrationValue__: specifies the calibration trimming value.
  *         This parameter must be a number between 0 and 0x1F.
  */
#define __HAL_RCC_CSI_CALIBRATIONVALUE_ADJUST(__CSICalibrationValue__) \
                  MODIFY_REG(RCC->ICSCR, RCC_ICSCR_CSITRIM, (uint32_t)(__CSICalibrationValue__) << POSITION_VAL(RCC_ICSCR_CSITRIM))

/**
  * @brief    Macros to enable or disable the force of the Low-power Internal oscillator (CSI)
  *           in STOP mode to be quickly available as kernel clock for USARTs and I2Cs.
  * @note     Keeping the CSI ON in STOP mode allows to avoid slowing down the communication
  *           speed because of the CSI start-up time.
  * @note     The enable of this function has not effect on the CSION bit.
  *           This parameter can be: ENABLE or DISABLE.
  * @retval None
  */
#define __HAL_RCC_CSISTOP_ENABLE()     SET_BIT(RCC->CR, RCC_CR_CSIKERON)
#define __HAL_RCC_CSISTOP_DISABLE()    CLEAR_BIT(RCC->CR, RCC_CR_CSIKERON)


/** @brief  Macros to enable or disable the Internal Low Speed oscillator (LSI).
  * @note   After enabling the LSI, the application software should wait on
  *         LSIRDY flag to be set indicating that LSI clock is stable and can
  *         be used to clock the IWDG and/or the RTC.
  * @note   LSI can not be disabled if the IWDG is running.
  * @note   When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator
  *         clock cycles.
  */
#define __HAL_RCC_LSI_ENABLE()         SET_BIT(RCC->CSR, RCC_CSR_LSION)
#define __HAL_RCC_LSI_DISABLE()        CLEAR_BIT(RCC->CSR, RCC_CSR_LSION)

/**
  * @brief  Macro to configure the External High Speed oscillator (__HSE__).
  * @note   After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application
  *         software should wait on HSERDY flag to be set indicating that HSE clock
  *         is stable and can be used to clock the PLL and/or system clock.
  * @note   HSE state can not be changed if it is used directly or through the
  *         PLL as system clock. In this case, you have to select another source
  *         of the system clock then change the HSE state (ex. disable it).
  * @note   The HSE is stopped by hardware when entering STOP and STANDBY modes.
  * @note   This function reset the CSSON bit, so if the clock security system(CSS)
  *         was previously enabled you have to enable it again after calling this
  *         function.
  * @param  __STATE__: specifies the new state of the HSE.
  *         This parameter can be one of the following values:
  *            @arg RCC_HSE_OFF: turn OFF the HSE oscillator, HSERDY flag goes low after
  *                              6 HSE oscillator clock cycles.
  *            @arg RCC_HSE_ON: turn ON the HSE oscillator.
  *            @arg RCC_HSE_BYPASS: HSE oscillator bypassed with external clock.
  */
#define __HAL_RCC_HSE_CONFIG(__STATE__)                         \
                    do {                                        \
                      if ((__STATE__) == RCC_HSE_ON)            \
                      {                                         \
                        SET_BIT(RCC->CR, RCC_CR_HSEON);         \
                      }                                         \
                      else if ((__STATE__) == RCC_HSE_OFF)      \
                      {                                         \
                        CLEAR_BIT(RCC->CR, RCC_CR_HSEON);       \
                        CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP);      \
                      }                                         \
                      else if ((__STATE__) == RCC_HSE_BYPASS)   \
                      {                                         \
                        SET_BIT(RCC->CR, RCC_CR_HSEBYP);        \
                        SET_BIT(RCC->CR, RCC_CR_HSEON);         \
                      }                                         \
                      else                                      \
                      {                                         \
                        CLEAR_BIT(RCC->CR, RCC_CR_HSEON);       \
                        CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP);      \
                      }                                         \
                    } while(0)

/** @defgroup RCC_LSE_Configuration LSE Configuration
  * @{   
  */

/**
  * @brief  Macro to configure the External Low Speed oscillator (LSE).
  * @note   Transition LSE Bypass to LSE On and LSE On to LSE Bypass are not supported by this macro. 
  *         User should request a transition to LSE Off first and then LSE On or LSE Bypass.  
  * @note   As the LSE is in the Backup domain and write access is denied to
  *         this domain after reset, you have to enable write access using 
  *         HAL_PWR_EnableBkUpAccess() function before to configure the LSE
  *         (to be done once after reset).  
  * @note   After enabling the LSE (RCC_LSE_ON or RCC_LSE_BYPASS), the application
  *         software should wait on LSERDY flag to be set indicating that LSE clock
  *         is stable and can be used to clock the RTC.
  * @param  __STATE__: specifies the new state of the LSE.
  *         This parameter can be one of the following values:
  *            @arg RCC_LSE_OFF: turn OFF the LSE oscillator, LSERDY flag goes low after
  *                              6 LSE oscillator clock cycles.
  *            @arg RCC_LSE_ON: turn ON the LSE oscillator.
  *            @arg RCC_LSE_BYPASS: LSE oscillator bypassed with external clock.
  */
#define __HAL_RCC_LSE_CONFIG(__STATE__) \
                    do {                                       \
                      if((__STATE__) == RCC_LSE_ON)            \
                      {                                        \
                        SET_BIT(RCC->BDCR, RCC_BDCR_LSEON);    \
                      }                                        \
                      else if((__STATE__) == RCC_LSE_OFF)      \
                      {                                        \
                        CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON);  \
                        CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \
                      }                                        \
                      else if((__STATE__) == RCC_LSE_BYPASS)   \
                      {                                        \
                        SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP);   \
                        SET_BIT(RCC->BDCR, RCC_BDCR_LSEON);    \
                      }                                        \
                      else                                     \
                      {                                        \
                        CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON);  \
                        CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \
                      }                                        \
                    } while(0)
/**
  * @}
  */

/** @brief  Macros to enable or disable the the RTC clock.
  * @note   These macros must be used only after the RTC clock source was selected.
  */
#define __HAL_RCC_RTC_ENABLE()         SET_BIT(RCC->BDCR, RCC_BDCR_RTCEN)
#define __HAL_RCC_RTC_DISABLE()        CLEAR_BIT(RCC->BDCR, RCC_BDCR_RTCEN)

/** @brief  Macros to configure the RTC clock (RTCCLK).
  * @note   As the RTC clock configuration bits are in the Backup domain and write
  *         access is denied to this domain after reset, you have to enable write
  *         access using the Power Backup Access macro before to configure
  *         the RTC clock source (to be done once after reset).    
  * @note   Once the RTC clock is configured it can't be changed unless the  
  *         Backup domain is reset using __HAL_RCC_BackupReset_RELEASE() macro, or by
  *         a Power On Reset (POR).
  * @param  __RTCCLKSource__: specifies the RTC clock source.
  *         This parameter can be one of the following values:
  *            @arg RCC_RTCCLKSOURCE_LSE: LSE selected as RTC clock.
  *            @arg RCC_RTCCLKSOURCE_LSI: LSI selected as RTC clock.
  *            @arg RCC_RTCCLKSOURCE_HSE_DIVx: HSE clock divided by x selected
  *                                            as RTC clock, where x:[2,31]
  * @note   If the LSE or LSI is used as RTC clock source, the RTC continues to
  *         work in STOP and STANDBY modes, and can be used as wakeup source.
  *         However, when the HSE clock is used as RTC clock source, the RTC
  *         cannot be used in STOP and STANDBY modes.    
  * @note   The maximum input clock frequency for RTC is 1MHz (when using HSE as
  *         RTC clock source).
  */
#define __HAL_RCC_RTC_CLKPRESCALER(__RTCCLKSource__) (((__RTCCLKSource__) & RCC_BDCR_RTCSEL) == RCC_BDCR_RTCSEL) ?    \
                                                 MODIFY_REG(RCC->CFGR, RCC_CFGR_RTCPRE, (((__RTCCLKSource__) & 0xFFFFCFF) >> 4)) : CLEAR_BIT(RCC->CFGR, RCC_CFGR_RTCPRE)
                                                   
#define __HAL_RCC_RTC_CONFIG(__RTCCLKSource__) do { __HAL_RCC_RTC_CLKPRESCALER(__RTCCLKSource__);    \
                                                    RCC->BDCR |= ((__RTCCLKSource__) & 0x00000FFF);  \
                                                   } while (0)

#define  __HAL_RCC_GET_RTC_SOURCE() ((uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL)))
                                                                                                                            

/** @brief  Macros to force or release the Backup domain reset.
  * @note   This function resets the RTC peripheral (including the backup registers)
  *         and the RTC clock source selection in RCC_CSR register.
  * @note   The BKPSRAM is not affected by this reset.
  */
#define __HAL_RCC_BACKUPRESET_FORCE()   SET_BIT(RCC->BDCR, RCC_BDCR_BDRST)
#define __HAL_RCC_BACKUPRESET_RELEASE() CLEAR_BIT(RCC->BDCR, RCC_BDCR_BDRST)

/** @brief  Macros to enable or disable the main PLL.
  * @note   After enabling the main PLL, the application software should wait on
  *         PLLRDY flag to be set indicating that PLL clock is stable and can
  *         be used as system clock source.
  * @note   The main PLL can not be disabled if it is used as system clock source
  * @note   The main PLL is disabled by hardware when entering STOP and STANDBY modes.
  */
#define __HAL_RCC_PLL_ENABLE()         SET_BIT(RCC->CR, RCC_CR_PLL1ON)
#define __HAL_RCC_PLL_DISABLE()        CLEAR_BIT(RCC->CR, RCC_CR_PLL1ON)

/**
  * @brief  Enables or disables each clock output (PLL_P_CLK, PLL_Q_CLK, PLL_R_CLK)
  * @note   Enabling/disabling  Those Clocks can be any time  without the need to stop the PLL,
  *        (except the ck_pll_p of the System PLL that cannot be stopped if used as System
  *         Clock.This is mainly used to save Power.
  * @param  __RCC_PLL1ClockOut__: specifies the PLL clock to be outputted
  *          This parameter can be one of the following values:
  *            @arg RCC_PLL1_DIVP: This clock is used to generate system clock (up to 400MHZ)
  *            @arg RCC_PLL1_DIVQ: This clock is used to generate peripherals clock (up to 400MHZ)
  *            @arg RCC_PLL1_DIVR: This clock is used to generate peripherals clock (up to 400MHZ)
  * @retval None
  */
#define __HAL_RCC_PLLCLKOUT_ENABLE(__RCC_PLL1ClockOut__)   SET_BIT(RCC->PLLCFGR, (__RCC_PLL1ClockOut__))

#define __HAL_RCC_PLLCLKOUT_DISABLE(__RCC_PLL1ClockOut__)  CLEAR_BIT(RCC->PLLCFGR, (__RCC_PLL1ClockOut__))


/**
  * @brief  Enables or disables Fractional Part Of The Multiplication Factor of PLL1 VCO
  * @note   Enabling/disabling  Fractional Part can be any time  without the need to stop the PLL1
  * @retval None
  */
#define __HAL_RCC_PLLFRACN_ENABLE()   SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL1FRACEN)

#define __HAL_RCC_PLLFRACN_DISABLE()  CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL1FRACEN)


/**
  * @brief  Macro to configures the main PLL clock source, multiplication and division factors.
  * @note   This function must be used only when the main PLL is disabled.
  *
  * @param  __RCC_PLLSOURCE__: specifies the PLL entry clock source.
  *          This parameter can be one of the following values:
  *            @arg RCC_PLLSOURCE_CSI: CSI oscillator clock selected as PLL clock entry
  *            @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry
  *            @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry
  * @note   This clock source (__RCC_PLLSource__) is common for the main PLL1 (main PLL) and PLL2 & PLL3 .
  *
  * @param  __PLLM1__: specifies the division factor for PLL VCO input clock
  *          This parameter must be a number between 1 and 63.
  * @note   You have to set the PLLM parameter correctly to ensure that the VCO input
  *         frequency ranges from 1 to 16 MHz. 
  *
  * @param  __PLLN1__: specifies the multiplication factor for PLL VCO output clock
  *          This parameter must be a number between 4 and 512.
  * @note   You have to set the PLLN parameter correctly to ensure that the VCO
  *         output frequency is between 150 and 420 MHz (when in medium VCO range) or
  *         between 192 and 836 MHZ (when in wide VCO range)
  *
  * @param  __PLLP1__: specifies the division factor for system  clock.
  *          This parameter must be a number between 2 and 128 (where odd numbers not allowed)
  *
  * @param  __PLLQ1__: specifies the division factor for peripheral kernel clocks
  *          This parameter must be a number between 1 and 128
  *
  * @param  __PLLR1__: specifies the division factor for peripheral kernel clocks
  *          This parameter must be a number between 1 and 128
  *
  * @retval None
  */


#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSOURCE__, __PLLM1__, __PLLN1__, __PLLP1__, __PLLQ1__,__PLLR1__ ) \
                  do{ MODIFY_REG(RCC->PLLCKSELR, (RCC_PLLCKSELR_PLLSRC | RCC_PLLCKSELR_DIVM1) , ((__RCC_PLLSOURCE__) | ( (__PLLM1__) <<4U)));  \
                      WRITE_REG (RCC->PLL1DIVR , ( (((__PLLN1__) - 1U )& RCC_PLL1DIVR_N1) | ((((__PLLP1__) -1U ) << 9U) & RCC_PLL1DIVR_P1) | \
                                ((((__PLLQ1__) -1U) << 16U)& RCC_PLL1DIVR_Q1) | ((((__PLLR1__) - 1U) << 24U)& RCC_PLL1DIVR_R1))); \
                    } while(0)                                         
                                                                                                                                                                                                            

/** @brief  Macro to configure the PLLs clock source.
  * @note   This function must be used only when all PLLs are disabled.
  * @param  __PLLSOURCE__: specifies the PLLs entry clock source.
  *         This parameter can be one of the following values:
  *            @arg RCC_PLLSOURCE_CSI: CSI oscillator clock selected as PLL clock entry
  *            @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry
  *            @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry
  *      
  */
#define __HAL_RCC_PLL_PLLSOURCE_CONFIG(__PLLSOURCE__) MODIFY_REG(RCC->PLLCKSELR, RCC_PLLCKSELR_PLLSRC, (__PLLSOURCE__))
                      
                      
/**
  * @brief  Macro to configures the main PLL clock Fractional Part Of The Multiplication Factor
  * 
  * @note   These bits can be written at any time, allowing dynamic fine-tuning of the PLL1 VCO
  *
  * @param  __RCC_PLL1FRACN__: specifies Fractional Part Of The Multiplication Factor for PLL1 VCO
  *                            It should be a value between 0 and 8191                                                                                                                                                                    
  * @note   Warning: The software has to set correctly these bits to insure that the VCO 
  *                  output frequency is between its valid frequency range, which is:
  *                   192 to 836 MHz if PLL1VCOSEL = 0
  *                   150 to 420 MHz if PLL1VCOSEL = 1.
  *
  *
  * @retval None
  */                                                                                                                                                                                                             
 #define  __HAL_RCC_PLLFRACN_CONFIG(__RCC_PLL1FRACN__) MODIFY_REG(RCC->PLL1FRACR, RCC_PLL1FRACR_FRACN1, (uint32_t)(__RCC_PLL1FRACN__) << POSITION_VAL(RCC_PLL1FRACR_FRACN1))
                                                                                                                                                                                                             

/** @brief  Macro to select  the PLL1  reference frequency range.
  * @param  __RCC_PLL1VCIRange__: specifies the PLL1 input frequency range 
  *         This parameter can be one of the following values:
  *            @arg RCC_PLL1VCIRANGE_0: Range frequency is between 1 and 2 MHz
  *            @arg RCC_PLL1VCIRANGE_1: Range frequency is between 2 and 4 MHz
  *            @arg RCC_PLL1VCIRANGE_2: Range frequency is between 4 and 8 MHz
  *            @arg RCC_PLL1VCIRANGE_3: Range frequency is between 8 and 16 MHz
  * @retval None
  */
#define __HAL_RCC_PLL_VCIRANGE(__RCC_PLL1VCIRange__) \
                  MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLL1RGE, (__RCC_PLL1VCIRange__))                                                                                                                                                                     


/** @brief  Macro to select  the PLL1  reference frequency range.
  * @param  __RCC_PLL1VCORange__: specifies the PLL1 input frequency range 
  *         This parameter can be one of the following values:
  *            @arg RCC_PLL1VCOWIDE: Range frequency is between 192 and 836 MHz
  *            @arg RCC_PLL1VCOMEDIUM: Range frequency is between 150 and 420 MHz
  * @retval None
  */
#define __HAL_RCC_PLL_VCORANGE(__RCC_PLL1VCORange__) \
                  MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLL1VCOSEL, (__RCC_PLL1VCORange__))                                                                                                                                                                                                                                                    

                                         
                                                                                                                                                                                                             
/** @brief  Macro to get the clock source used as system clock.
  * @retval The clock source used as system clock. The returned value can be one
  *         of the following:
  *              - RCC_CFGR_SWS_CSI: CSI used as system clock.
  *              - RCC_CFGR_SWS_HSI: HSI used as system clock.
  *              - RCC_CFGR_SWS_HSE: HSE used as system clock.
  *              - RCC_CFGR_SWS_PLL: PLL used as system clock.
  */
#define __HAL_RCC_GET_SYSCLK_SOURCE() ((uint32_t)(RCC->CFGR & RCC_CFGR_SWS))


/**
  * @brief Macro to configure the system clock source.
  * @param __RCC_SYSCLKSOURCE__: specifies the system clock source.
  * This parameter can be one of the following values:
  *              - RCC_SYSCLKSOURCE_HSI: HSI oscillator is used as system clock source.
  *              - RCC_SYSCLKSOURCE_CSI: CSI oscillator is used as system clock source.
  *              - RCC_SYSCLKSOURCE_HSE: HSE oscillator is used as system clock source.
  *              - RCC_SYSCLKSOURCE_PLLCLK: PLL output is used as system clock source.
  */
#define __HAL_RCC_SYSCLK_CONFIG(__RCC_SYSCLKSOURCE__) MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, (__RCC_SYSCLKSOURCE__))

/** @brief  Macro to get the oscillator used as PLL clock source.
  * @retval The oscillator used as PLL clock source. The returned value can be one
  *         of the following:
  *              - RCC_PLLSOURCE_NONE: No oscillator is used as PLL clock source.
  *              - RCC_PLLSOURCE_CSI: CSI oscillator is used as PLL clock source.
  *              - RCC_PLLSOURCE_HSI: HSI oscillator is used as PLL clock source.
  *              - RCC_PLLSOURCE_HSE: HSE oscillator is used as PLL clock source.
  */
#define __HAL_RCC_GET_PLL_OSCSOURCE() ((uint32_t)(RCC->PLLCKSELR & RCC_PLLCKSELR_PLLSRC))

/**
  * @brief  Macro to configure the External Low Speed oscillator (LSE) drive capability.
  * @note   As the LSE is in the Backup domain and write access is denied to
  *         this domain after reset, you have to enable write access using
  *         HAL_PWR_EnableBkUpAccess() function before to configure the LSE
  *         (to be done once after reset).
  * @param  __LSEDRIVE__: specifies the new state of the LSE drive capability.
  *          This parameter can be one of the following values:
  *            @arg RCC_LSEDRIVE_LOW: LSE oscillator low drive capability.
  *            @arg RCC_LSEDRIVE_MEDIUMLOW: LSE oscillator medium low drive capability.
  *            @arg RCC_LSEDRIVE_MEDIUMHIGH: LSE oscillator medium high drive capability.
  *            @arg RCC_LSEDRIVE_HIGH: LSE oscillator high drive capability.
  * @retval None
  */
#define __HAL_RCC_LSEDRIVE_CONFIG(__LSEDRIVE__) \
                  MODIFY_REG(RCC->BDCR, RCC_BDCR_LSEDRV, (uint32_t)(__LSEDRIVE__))
/**
  * @brief  Macro to configure the wake up from stop clock.
  * @param  __RCC_STOPWUCLK__: specifies the clock source used after wake up from stop 
  *         This parameter can be one of the following values:
  *            @arg RCC_STOP_WAKEUPCLOCK_CSI: CSI selected as system clock source
  *            @arg RCC_STOP_WAKEUPCLOCK_HSI: HSI selected as system clock source
  * @retval None
  */
#define __HAL_RCC_WAKEUPSTOP_CLK_CONFIG(__RCC_STOPWUCLK__) \
                  MODIFY_REG(RCC->CFGR, RCC_CFGR_STOPWUCK, (__RCC_STOPWUCLK__))

/**
  * @brief  Macro to configure the Kernel wake up from stop clock.
  * @param  __RCC_STOPKERWUCLK__: specifies the Kernel clock source used after wake up from stop 
  *         This parameter can be one of the following values:
  *            @arg RCC_STOP_KERWAKEUPCLOCK_CSI: CSI selected as Kernel clock source
  *            @arg RCC_STOP_KERWAKEUPCLOCK_HSI: HSI selected as Kernel clock source
  * @retval None
  */
#define __HAL_RCC_KERWAKEUPSTOP_CLK_CONFIG(__RCC_STOPKERWUCLK__) \
                  MODIFY_REG(RCC->CFGR, RCC_CFGR_STOPKERWUCK, (__RCC_STOPKERWUCLK__))

/** @defgroup RCC_Flags_Interrupts_Management Flags Interrupts Management
  * @brief macros to manage the specified RCC Flags and interrupts.
  * @{
  */
/** @brief  Enable RCC interrupt.
  * @param  __INTERRUPT__: specifies the RCC interrupt sources to be enabled.
  *         This parameter can be any combination of the following values:
  *            @arg RCC_IT_LSIRDY: LSI ready interrupt
  *            @arg RCC_IT_LSERDY: LSE ready interrupt
  *            @arg RCC_IT_CSIRDY: HSI ready interrupt
  *            @arg RCC_IT_HSIRDY: HSI ready interrupt
  *            @arg RCC_IT_HSERDY: HSE ready interrupt
  *            @arg RCC_IT_HSI48RDY: HSI48 ready interrupt
  *            @arg RCC_IT_PLLRDY: main PLL ready interrupt
  *            @arg RCC_IT_PLL2RDY: PLL2 ready interrupt
  *            @arg RCC_IT_PLL3RDY: PLL3 ready interrupt
  *            @arg RCC_IT_LSECSS: Clock security system interrupt
  */
#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) SET_BIT(RCC->CIER, (__INTERRUPT__))

/** @brief Disable RCC interrupt 
  * @param  __INTERRUPT__: specifies the RCC interrupt sources to be disabled.
  *         This parameter can be any combination of the following values:
  *            @arg RCC_IT_LSIRDY: LSI ready interrupt
  *            @arg RCC_IT_LSERDY: LSE ready interrupt
  *            @arg RCC_IT_CSIRDY: HSI ready interrupt
  *            @arg RCC_IT_HSIRDY: HSI ready interrupt
  *            @arg RCC_IT_HSERDY: HSE ready interrupt
  *            @arg RCC_IT_HSI48RDY: HSI48 ready interrupt
  *            @arg RCC_IT_PLLRDY: main PLL ready interrupt
  *            @arg RCC_IT_PLL2RDY: PLL2 ready interrupt
  *            @arg RCC_IT_PLL3RDY: PLL3 ready interrupt
  *            @arg RCC_IT_LSECSS: Clock security system interrupt
  */
#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) CLEAR_BIT(RCC->CIER, (__INTERRUPT__))

/** @brief  Clear the RCC's interrupt pending bits 
  * @param  __INTERRUPT__: specifies the interrupt pending bit to clear.
  *         This parameter can be any combination of the following values:
  *            @arg RCC_IT_LSIRDY: LSI ready interrupt
  *            @arg RCC_IT_LSERDY: LSE ready interrupt
  *            @arg RCC_IT_CSIRDY: CSI ready interrupt
  *            @arg RCC_IT_HSIRDY: HSI ready interrupt
  *            @arg RCC_IT_HSERDY: HSE ready interrupt
  *            @arg RCC_IT_HSI48RDY: HSI48 ready interrupt
  *            @arg RCC_IT_PLLRDY: main PLL ready interrupt
  *            @arg RCC_IT_PLL2RDY: PLL2 ready interrupt
  *            @arg RCC_IT_PLL3RDY: PLL3 ready interrupt
  *            @arg RCC_IT_HSECSS: HSE Clock Security interrupt
  *            @arg RCC_IT_LSECSS: Clock security system interrupt
  */
#define __HAL_RCC_CLEAR_IT(__INTERRUPT__) (RCC->CICR = (__INTERRUPT__))

/** @brief  Check the RCC's interrupt has occurred or not.
  * @param  __INTERRUPT__: specifies the RCC interrupt source to check.
  *         This parameter can be any combination of the following values:
  *            @arg RCC_IT_LSIRDY: LSI ready interrupt
  *            @arg RCC_IT_LSERDY: LSE ready interrupt
  *            @arg RCC_IT_CSIRDY: CSI ready interrupt
  *            @arg RCC_IT_HSIRDY: HSI ready interrupt
  *            @arg RCC_IT_HSERDY: HSE ready interrupt
  *            @arg RCC_IT_HSI48RDY: HSI48 ready interrupt
  *            @arg RCC_IT_PLLRDY: main PLL ready interrupt
  *            @arg RCC_IT_PLL2RDY: PLL2 ready interrupt
  *            @arg RCC_IT_PLL3RDY: PLL3 ready interrupt
  *            @arg RCC_IT_HSECSS: HSE Clock Security interrupt
  *            @arg RCC_IT_LSECSS: Clock security system interrupt
  * @retval The new state of __INTERRUPT__ (TRUE or FALSE).
  */
#define __HAL_RCC_GET_IT(__INTERRUPT__) ((RCC->CIFR & (__INTERRUPT__)) == (__INTERRUPT__))

/** @brief Set RMVF bit to clear the reset flags.
  */
#define __HAL_RCC_CLEAR_RESET_FLAGS() (RCC->RSR |= RCC_RSR_RMVF)



/** @brief  Check RCC flag is set or not.
  * @param  __FLAG__: specifies the flag to check.
  *         This parameter can be one of the following values:
  *            @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready
  *            @arg RCC_FLAG_HSIDIV: HSI divider flag
  *            @arg RCC_FLAG_CSIRDY: CSI oscillator clock ready
  *            @arg RCC_FLAG_HSI48RDY: HSI48 oscillator clock ready
  *            @arg RCC_FLAG_HSERDY:  HSE oscillator clock ready
  *            @arg RCC_FLAG_D1CKRDY:  Domain1 clock ready
  *            @arg RCC_FLAG_D2CKRDY:  Domain2 clock ready
  *            @arg RCC_FLAG_PLLRDY:  PLL1 clock ready
  *            @arg RCC_FLAG_PLL2RDY: PLL2 clock ready
  *            @arg RCC_FLAG_PLL3RDY: PLL3 clock ready
  *            @arg RCC_FLAG_LSERDY: LSE oscillator clock ready
  *            @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready
  *            @arg RCC_FLAG_RMVF:   Remove  reset Flag
  *            @arg RCC_FLAG_CPURST: CPU reset flag
  *            @arg RCC_FLAG_D1RST:  D1 domain power switch reset flag                                         
  *            @arg RCC_FLAG_D2RST:  D2 domain power switch reset flag
  *            @arg RCC_FLAG_BORRST: BOR reset flag
  *            @arg RCC_FLAG_PINRST: Pin reset
  *            @arg RCC_FLAG_PORRST: POR/PDR  reset
  *            @arg RCC_FLAG_SFTRST: System reset from CPU reset flag
  *            @arg RCC_FLAG_BORRST:   D2 domain power switch reset flag
  *            @arg RCC_FLAG_IWDG1RST: CPU Independent Watchdog reset
  *            @arg RCC_FLAG_WWDG1RST: Window Watchdog1 reset
  *            @arg RCC_FLAG_LPWR1RST: Reset due to illegal D1 DSTANDBY or CPU CSTOP flag
  *            @arg RCC_FLAG_LPWR2RST: Reset due to illegal D2 DSTANDBY flag
  * @retval The new state of __FLAG__ (TRUE or FALSE).
  */
#define RCC_FLAG_MASK  ((uint8_t)0x1F)
#define __HAL_RCC_GET_FLAG(__FLAG__) (((((((__FLAG__) >> 5) == 1)? RCC->CR :((((__FLAG__) >> 5) == 2) ? RCC->BDCR : \
((((__FLAG__) >> 5) == 3)? RCC->CSR : ((((__FLAG__) >> 5) == 4)? RCC->RSR :RCC->CIFR))))  & ((uint32_t)1 << ((__FLAG__) & RCC_FLAG_MASK)))!= 0)? 1 : 0)


/**
  * @}
  */

#define RCC_GET_PLL_OSCSOURCE() ((RCC->PLLCKSELR & RCC_PLLCKSELR_PLLSRC) >> POSITION_VAL(RCC_PLLCKSELR_PLLSRC))

/**
  * @}
  */

/* Include RCC HAL Extension module */
#include "stm32h7xx_hal_rcc_ex.h"

/* Exported functions --------------------------------------------------------*/
 /** @addtogroup RCC_Exported_Functions
  * @{
  */
  
/** @addtogroup RCC_Exported_Functions_Group1
  * @{
  */    
/* Initialization and de-initialization functions  ******************************/
void HAL_RCC_DeInit(void);
HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct);
HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency);

/**
  * @}
  */

/** @addtogroup RCC_Exported_Functions_Group2
  * @{
  */
/* Peripheral Control functions  ************************************************/
void     HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv);
void     HAL_RCC_EnableCSS(void);
void     HAL_RCC_DisableCSS(void);
uint32_t HAL_RCC_GetSysClockFreq(void);
uint32_t HAL_RCC_GetHCLKFreq(void);
uint32_t HAL_RCC_GetPCLK1Freq(void);
uint32_t HAL_RCC_GetPCLK2Freq(void);
void     HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct);
void     HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency);
/* CSS NMI IRQ handler */
void     HAL_RCC_NMI_IRQHandler(void);
/* User Callbacks in non blocking mode (IT mode) */
void     HAL_RCC_CCSCallback(void);

/**
  * @}
  */

/**
  * @}
  */

/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup RCC_Private_Constants RCC Private Constants
  * @{
  */

#define HSE_TIMEOUT_VALUE          HSE_STARTUP_TIMEOUT
#define HSI_TIMEOUT_VALUE          ((uint32_t)2)    /* 2 ms */
#define HSI48_TIMEOUT_VALUE        ((uint32_t)2)    /* 2 ms */
#define CSI_TIMEOUT_VALUE          ((uint32_t)2)    /* 2 ms */
#define LSI_TIMEOUT_VALUE          ((uint32_t)2)    /* 2 ms */
#define PLL_TIMEOUT_VALUE          ((uint32_t)2)    /* 2 ms */
#define CLOCKSWITCH_TIMEOUT_VALUE  ((uint32_t)5000) /* 5 s  */
#define RCC_DBP_TIMEOUT_VALUE      ((uint32_t)100)
#define RCC_LSE_TIMEOUT_VALUE      LSE_STARTUP_TIMEOUT

/**
  * @}
  */

/* Private macros ------------------------------------------------------------*/
/** @addtogroup RCC_Private_Macros RCC Private Macros
  * @{
  */
    
/** @defgroup RCC_IS_RCC_Definitions RCC Private macros to check input parameters
  * @{
  */  

#define IS_RCC_OSCILLATORTYPE(OSCILLATOR) (((OSCILLATOR) == RCC_OSCILLATORTYPE_NONE)                           || \
                                           (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) || \
                                           (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) || \
                                           (((OSCILLATOR) & RCC_OSCILLATORTYPE_CSI) == RCC_OSCILLATORTYPE_CSI) || \
                                           (((OSCILLATOR) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) || \
                                           (((OSCILLATOR) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE) || \
                                           (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSI48) == RCC_OSCILLATORTYPE_HSI48))

#define IS_RCC_HSE(HSE) (((HSE) == RCC_HSE_OFF) || ((HSE) == RCC_HSE_ON) || \
                         ((HSE) == RCC_HSE_BYPASS))

#define IS_RCC_LSE(LSE) (((LSE) == RCC_LSE_OFF) || ((LSE) == RCC_LSE_ON) || \
                         ((LSE) == RCC_LSE_BYPASS))

#define IS_RCC_HSI(HSI) (((HSI) == RCC_HSI_OFF) || ((HSI) == RCC_HSI_ON)    || \
                         ((HSI) == RCC_HSI_DIV1) || ((HSI) == RCC_HSI_DIV2) || \
                         ((HSI) == RCC_HSI_DIV4) || ((HSI) == RCC_HSI_DIV8))

#define IS_RCC_HSI48(HSI48) (((HSI48) == RCC_HSI48_OFF) || ((HSI48) == RCC_HSI48_ON))

#define IS_RCC_LSI(LSI) (((LSI) == RCC_LSI_OFF) || ((LSI) == RCC_LSI_ON))

#define IS_RCC_CSI(CSI) (((CSI) == RCC_CSI_OFF) || ((CSI) == RCC_CSI_ON))

#define IS_RCC_PLL(PLL) (((PLL) == RCC_PLL_NONE) ||((PLL) == RCC_PLL_OFF) || \
                         ((PLL) == RCC_PLL_ON))

#define IS_RCC_PLLSOURCE(SOURCE) (((SOURCE) == RCC_PLLSOURCE_CSI)  || \
                                  ((SOURCE) == RCC_PLLSOURCE_HSI)  || \
                                  ((SOURCE) == RCC_PLLSOURCE_NONE) || \
                                  ((SOURCE) == RCC_PLLSOURCE_HSE))
#define IS_RCC_PLLM_VALUE(VALUE) ((1 <= (VALUE)) && ((VALUE) <= 63))
#define IS_RCC_PLLN_VALUE(VALUE) ((4 <= (VALUE)) && ((VALUE) <= 512))
#define IS_RCC_PLLP_VALUE(VALUE) ((1 <= (VALUE)) && ((VALUE) <= 128))
#define IS_RCC_PLLQ_VALUE(VALUE) ((1 <= (VALUE)) && ((VALUE) <= 128))                                 
#define IS_RCC_PLLR_VALUE(VALUE) ((1 <= (VALUE)) && ((VALUE) <= 128))

#define IS_RCC_PLLCLOCKOUT_VALUE(VALUE) (((VALUE) == RCC_PLL1_DIVP) || \
                                         ((VALUE) == RCC_PLL1_DIVQ) || \
                                         ((VALUE) == RCC_PLL1_DIVR))

#define IS_RCC_CLOCKTYPE(CLK) ((1 <= (CLK)) && ((CLK) <= 0x3F))

#define IS_RCC_SYSCLKSOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSOURCE_CSI) || \
                                     ((SOURCE) == RCC_SYSCLKSOURCE_HSI) || \
                                     ((SOURCE) == RCC_SYSCLKSOURCE_HSE) || \
                                     ((SOURCE) == RCC_SYSCLKSOURCE_PLLCLK))

#define IS_RCC_SYSCLK(SYSCLK) (((SYSCLK) == RCC_SYSCLK_DIV1)   || ((SYSCLK) == RCC_SYSCLK_DIV2)   || \
                               ((SYSCLK) == RCC_SYSCLK_DIV4)   || ((SYSCLK) == RCC_SYSCLK_DIV8)   || \
                               ((SYSCLK) == RCC_SYSCLK_DIV16)  || ((SYSCLK) == RCC_SYSCLK_DIV64)  || \
                               ((SYSCLK) == RCC_SYSCLK_DIV128) || ((SYSCLK) == RCC_SYSCLK_DIV256) || \
                               ((SYSCLK) == RCC_SYSCLK_DIV512))


#define IS_RCC_HCLK(HCLK) (((HCLK) == RCC_HCLK_DIV1)   || ((HCLK) == RCC_HCLK_DIV2)   || \
                           ((HCLK) == RCC_HCLK_DIV4)   || ((HCLK) == RCC_HCLK_DIV8)   || \
                           ((HCLK) == RCC_HCLK_DIV16)  || ((HCLK) == RCC_HCLK_DIV64)  || \
                           ((HCLK) == RCC_HCLK_DIV128) || ((HCLK) == RCC_HCLK_DIV256) || \
                           ((HCLK) == RCC_HCLK_DIV512))   
  
#define IS_RCC_D1PCLK1(D1PCLK1) (((D1PCLK1) == RCC_APB3_DIV1) || ((D1PCLK1) == RCC_APB3_DIV2) || \
                                 ((D1PCLK1) == RCC_APB3_DIV4) || ((D1PCLK1) == RCC_APB3_DIV8) || \
                                 ((D1PCLK1) == RCC_APB3_DIV16))   

#define IS_RCC_PCLK1(PCLK1) (((PCLK1) == RCC_APB1_DIV1) || ((PCLK1) == RCC_APB1_DIV2) || \
                             ((PCLK1) == RCC_APB1_DIV4) || ((PCLK1) == RCC_APB1_DIV8) || \
                            ((PCLK1) == RCC_APB1_DIV16))

#define IS_RCC_PCLK2(PCLK2) (((PCLK2) == RCC_APB2_DIV1) || ((PCLK2) == RCC_APB2_DIV2) || \
                             ((PCLK2) == RCC_APB2_DIV4) || ((PCLK2) == RCC_APB2_DIV8) || \
                             ((PCLK2) == RCC_APB2_DIV16))

#define IS_RCC_D3PCLK1(D3PCLK1) (((D3PCLK1) == RCC_APB4_DIV1) || ((D3PCLK1) == RCC_APB4_DIV2) || \
                                 ((D3PCLK1) == RCC_APB4_DIV4) || ((D3PCLK1) == RCC_APB4_DIV8) || \
                                 ((D3PCLK1) == RCC_APB4_DIV16))

#define IS_RCC_RTCCLKSOURCE(SOURCE) (((SOURCE) == RCC_RTCCLKSOURCE_LSE)       || ((SOURCE) == RCC_RTCCLKSOURCE_LSI)       || \
                                     ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV2)  || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV3)  || \
                                     ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV4)  || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV5)  || \
                                     ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV6)  || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV7)  || \
                                     ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV8)  || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV9)  || \
                                     ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV10) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV11) || \
                                     ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV12) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV13) || \
                                     ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV14) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV15) || \
                                     ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV16) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV17) || \
                                     ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV18) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV19) || \
                                     ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV20) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV21) || \
                                     ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV22) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV23) || \
                                     ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV24) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV25) || \
                                     ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV26) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV27) || \
                                     ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV28) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV29) || \
                                     ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV30) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV31) || \
                                     ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV32) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV33) || \
                                     ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV34) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV35) || \
                                     ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV36) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV37) || \
                                     ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV38) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV39) || \
                                     ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV40) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV41) || \
                                     ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV42) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV43) || \
                                     ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV44) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV45) || \
                                     ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV46) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV47) || \
                                     ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV48) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV49) || \
                                     ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV50) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV51) || \
                                     ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV52) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV53) || \
                                     ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV54) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV55) || \
                                     ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV56) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV57) || \
                                     ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV58) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV59) || \
                                     ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV60) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV61) || \
                                     ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV62) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV63))

#define IS_RCC_MCO(MCOx) (((MCOx) == RCC_MCO1) || ((MCOx) == RCC_MCO2))

#define IS_RCC_MCO1SOURCE(SOURCE) (((SOURCE) == RCC_MCO1SOURCE_HSI) || ((SOURCE) == RCC_MCO1SOURCE_LSE)       || \
                                   ((SOURCE) == RCC_MCO1SOURCE_HSE) || ((SOURCE) == RCC_MCO1SOURCE_PLL1QCLK)  || \
                                   ((SOURCE) == RCC_MCO1SOURCE_HSI48))

#define IS_RCC_MCO2SOURCE(SOURCE) (((SOURCE) == RCC_MCO2SOURCE_SYSCLK)    || ((SOURCE) == RCC_MCO2SOURCE_PLL2PCLK) || \
                                   ((SOURCE) == RCC_MCO2SOURCE_HSE)       || ((SOURCE) == RCC_MCO2SOURCE_PLLCLK)   || \
                                   ((SOURCE) == RCC_MCO2SOURCE_CSICLK)    || ((SOURCE) == RCC_MCO2SOURCE_LSICLK))
 
#define IS_RCC_MCODIV(DIV) (((DIV) == RCC_MCODIV_1)  || ((DIV) == RCC_MCODIV_2)   || \
                            ((DIV) == RCC_MCODIV_3)  || ((DIV) == RCC_MCODIV_4)   || \
                            ((DIV) == RCC_MCODIV_5)  || ((DIV) == RCC_MCODIV_6)   || \
                            ((DIV) == RCC_MCODIV_7)  || ((DIV) == RCC_MCODIV_8)   || \
                            ((DIV) == RCC_MCODIV_9)  || ((DIV) == RCC_MCODIV_10)  || \
                            ((DIV) == RCC_MCODIV_11) || ((DIV) == RCC_MCODIV_12)  || \
                            ((DIV) == RCC_MCODIV_13) || ((DIV) == RCC_MCODIV_14)  || \
                            ((DIV) == RCC_MCODIV_15)) 


#define IS_RCC_FLAG(FLAG) (((FLAG) == RCC_FLAG_HSIRDY)    || ((FLAG) == RCC_FLAG_CSIRDY)  || \
                           ((FLAG) == RCC_FLAG_HSI48RDY)  || ((FLAG) == RCC_FLAG_HSERDY)  || \
                           ((FLAG) == RCC_FLAG_D1CKRDY)   || ((FLAG) == RCC_FLAG_D2CKRDY) || \
                           ((FLAG) == RCC_FLAG_PLLRDY)    || ((FLAG) == RCC_FLAG_PLL2RDY) || \
                           ((FLAG) == RCC_FLAG_PLL3RDY)   || ((FLAG) == RCC_FLAG_LSERDY)  || \
                           ((FLAG) == RCC_FLAG_LSIRDY)    || ((FLAG) == RCC_FLAG_RMVF)    || \
                           ((FLAG) == RCC_FLAG_CPURST)    || ((FLAG) == RCC_FLAG_D1RST)   || \
                           ((FLAG) == RCC_FLAG_D2RST)     || ((FLAG) == RCC_FLAG_BORRST)  || \
                           ((FLAG) == RCC_FLAG_PINRST)    || ((FLAG) == RCC_FLAG_PORRST)  || \
                           ((FLAG) == RCC_FLAG_SFTRST)    || ((FLAG) == RCC_FLAG_IWDG1RST)|| \
                           ((FLAG) == RCC_FLAG_WWDGR1ST)  || ((FLAG) == RCC_FLAG_LPWR1RST)|| \
                           ((FLAG) == RCC_FLAG_LPWR2RST)  || ((FLAG) == RCC_FLAG_HSIDIV ))
                           

#define IS_RCC_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0xFFF)
#define IS_RCC_CSICALIBRATION_VALUE(VALUE) ((VALUE) <= 0x1F)

#define IS_RCC_STOP_WAKEUPCLOCK(SOURCE) (((SOURCE) == RCC_STOP_WAKEUPCLOCK_CSI) || \
                                         ((SOURCE) == RCC_STOP_WAKEUPCLOCK_HSI))

#define IS_RCC_STOP_KERWAKEUPCLOCK(SOURCE) (((SOURCE) == RCC_STOP_KERWAKEUPCLOCK_CSI) || \
                                          ((SOURCE) == RCC_STOP_KERWAKEUPCLOCK_HSI))
/**
  * @}
  */

/**
  * @}
  */
  
/**
  * @}
  */ 

/**
  * @}
  */
#ifdef __cplusplus
}
#endif

#endif /* __STM32H7xx_HAL_RCC_H */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/