rt-thread/bsp/stm32/stm32l4r9-st-eval/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c

/* USER CODE BEGIN Header */
/**
  ******************************************************************************
  * File Name          : stm32l4xx_hal_msp.c
  * Description        : This file provides code for the MSP Initialization
  *                      and de-Initialization codes.
  ******************************************************************************
  ** This notice applies to any and all portions of this file
  * that are not between comment pairs USER CODE BEGIN and
  * USER CODE END. Other portions of this file, whether
  * inserted by the user or by software development tools
  * are owned by their respective copyright owners.
  *
  * COPYRIGHT(c) 2018 STMicroelectronics
  *
  * Redistribution and use in source and binary forms, with or without modification,
  * are permitted provided that the following conditions are met:
  *   1. Redistributions of source code must retain the above copyright notice,
  *      this list of conditions and the following disclaimer.
  *   2. Redistributions in binary form must reproduce the above copyright notice,
  *      this list of conditions and the following disclaimer in the documentation
  *      and/or other materials provided with the distribution.
  *   3. Neither the name of STMicroelectronics nor the names of its contributors
  *      may be used to endorse or promote products derived from this software
  *      without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  ******************************************************************************
  */
/* USER CODE END Header */

/* Includes ------------------------------------------------------------------*/
#include "main.h"
/* USER CODE BEGIN Includes */

/* USER CODE END Includes */

/* Private typedef -----------------------------------------------------------*/
/* USER CODE BEGIN TD */

/* USER CODE END TD */

/* Private define ------------------------------------------------------------*/
/* USER CODE BEGIN Define */

/* USER CODE END Define */

/* Private macro -------------------------------------------------------------*/
/* USER CODE BEGIN Macro */

/* USER CODE END Macro */

/* Private variables ---------------------------------------------------------*/
/* USER CODE BEGIN PV */

/* USER CODE END PV */

/* Private function prototypes -----------------------------------------------*/
/* USER CODE BEGIN PFP */

/* USER CODE END PFP */

/* External functions --------------------------------------------------------*/
/* USER CODE BEGIN ExternalFunctions */

/* USER CODE END ExternalFunctions */

/* USER CODE BEGIN 0 */

/* USER CODE END 0 */
/**
  * Initializes the Global MSP.
  */
void HAL_MspInit(void)
{
  /* USER CODE BEGIN MspInit 0 */

  /* USER CODE END MspInit 0 */

  __HAL_RCC_SYSCFG_CLK_ENABLE();
  __HAL_RCC_PWR_CLK_ENABLE();

  /* System interrupt init*/

  /* USER CODE BEGIN MspInit 1 */

  /* USER CODE END MspInit 1 */
}

/**
* @brief DMA2D MSP Initialization
* This function configures the hardware resources used in this example
* @param hdma2d: DMA2D handle pointer
* @retval None
*/
void HAL_DMA2D_MspInit(DMA2D_HandleTypeDef* hdma2d)
{

  if(hdma2d->Instance==DMA2D)
  {
  /* USER CODE BEGIN DMA2D_MspInit 0 */

  /* USER CODE END DMA2D_MspInit 0 */
    /* Peripheral clock enable */
    __HAL_RCC_DMA2D_CLK_ENABLE();
  /* USER CODE BEGIN DMA2D_MspInit 1 */

  /* USER CODE END DMA2D_MspInit 1 */
  }

}

/**
* @brief DMA2D MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param hdma2d: DMA2D handle pointer
* @retval None
*/

void HAL_DMA2D_MspDeInit(DMA2D_HandleTypeDef* hdma2d)
{

  if(hdma2d->Instance==DMA2D)
  {
  /* USER CODE BEGIN DMA2D_MspDeInit 0 */

  /* USER CODE END DMA2D_MspDeInit 0 */
    /* Peripheral clock disable */
    __HAL_RCC_DMA2D_CLK_DISABLE();
  /* USER CODE BEGIN DMA2D_MspDeInit 1 */

  /* USER CODE END DMA2D_MspDeInit 1 */
  }

}

/**
* @brief DSI MSP Initialization
* This function configures the hardware resources used in this example
* @param hdsi: DSI handle pointer
* @retval None
*/
void HAL_DSI_MspInit(DSI_HandleTypeDef* hdsi)
{

  if(hdsi->Instance==DSI)
  {
  /* USER CODE BEGIN DSI_MspInit 0 */

  /* USER CODE END DSI_MspInit 0 */
    /* Peripheral clock enable */
    __HAL_RCC_DSI_CLK_ENABLE();
  /* USER CODE BEGIN DSI_MspInit 1 */

  /* USER CODE END DSI_MspInit 1 */
  }

}

/**
* @brief DSI MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param hdsi: DSI handle pointer
* @retval None
*/

void HAL_DSI_MspDeInit(DSI_HandleTypeDef* hdsi)
{

  if(hdsi->Instance==DSI)
  {
  /* USER CODE BEGIN DSI_MspDeInit 0 */

  /* USER CODE END DSI_MspDeInit 0 */
    /* Peripheral clock disable */
    __HAL_RCC_DSI_CLK_DISABLE();
  /* USER CODE BEGIN DSI_MspDeInit 1 */

  /* USER CODE END DSI_MspDeInit 1 */
  }

}

/**
* @brief GFXMMU MSP Initialization
* This function configures the hardware resources used in this example
* @param hgfxmmu: GFXMMU handle pointer
* @retval None
*/
void HAL_GFXMMU_MspInit(GFXMMU_HandleTypeDef* hgfxmmu)
{

  if(hgfxmmu->Instance==GFXMMU)
  {
  /* USER CODE BEGIN GFXMMU_MspInit 0 */

  /* USER CODE END GFXMMU_MspInit 0 */
    /* Peripheral clock enable */
    __HAL_RCC_GFXMMU_CLK_ENABLE();
  /* USER CODE BEGIN GFXMMU_MspInit 1 */

  /* USER CODE END GFXMMU_MspInit 1 */
  }

}

/**
* @brief GFXMMU MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param hgfxmmu: GFXMMU handle pointer
* @retval None
*/

void HAL_GFXMMU_MspDeInit(GFXMMU_HandleTypeDef* hgfxmmu)
{

  if(hgfxmmu->Instance==GFXMMU)
  {
  /* USER CODE BEGIN GFXMMU_MspDeInit 0 */

  /* USER CODE END GFXMMU_MspDeInit 0 */
    /* Peripheral clock disable */
    __HAL_RCC_GFXMMU_CLK_DISABLE();
  /* USER CODE BEGIN GFXMMU_MspDeInit 1 */

  /* USER CODE END GFXMMU_MspDeInit 1 */
  }

}

/**
* @brief LTDC MSP Initialization
* This function configures the hardware resources used in this example
* @param hltdc: LTDC handle pointer
* @retval None
*/
void HAL_LTDC_MspInit(LTDC_HandleTypeDef* hltdc)
{

  if(hltdc->Instance==LTDC)
  {
  /* USER CODE BEGIN LTDC_MspInit 0 */

  /* USER CODE END LTDC_MspInit 0 */
    /* Peripheral clock enable */
    __HAL_RCC_LTDC_CLK_ENABLE();
  /* USER CODE BEGIN LTDC_MspInit 1 */

  /* USER CODE END LTDC_MspInit 1 */
  }

}

/**
* @brief LTDC MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param hltdc: LTDC handle pointer
* @retval None
*/

void HAL_LTDC_MspDeInit(LTDC_HandleTypeDef* hltdc)
{

  if(hltdc->Instance==LTDC)
  {
  /* USER CODE BEGIN LTDC_MspDeInit 0 */

  /* USER CODE END LTDC_MspDeInit 0 */
    /* Peripheral clock disable */
    __HAL_RCC_LTDC_CLK_DISABLE();
  /* USER CODE BEGIN LTDC_MspDeInit 1 */

  /* USER CODE END LTDC_MspDeInit 1 */
  }

}

/**
* @brief UART MSP Initialization
* This function configures the hardware resources used in this example
* @param huart: UART handle pointer
* @retval None
*/
void HAL_UART_MspInit(UART_HandleTypeDef* huart)
{

  GPIO_InitTypeDef GPIO_InitStruct = {0};
  if(huart->Instance==USART3)
  {
  /* USER CODE BEGIN USART3_MspInit 0 */

  /* USER CODE END USART3_MspInit 0 */
    /* Peripheral clock enable */
    __HAL_RCC_USART3_CLK_ENABLE();

    __HAL_RCC_GPIOB_CLK_ENABLE();
    /**USART3 GPIO Configuration
    PB11     ------> USART3_RX
    PB10     ------> USART3_TX
    */
    GPIO_InitStruct.Pin = GPIO_PIN_11|GPIO_PIN_10;
    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
    GPIO_InitStruct.Pull = GPIO_PULLUP;
    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
    GPIO_InitStruct.Alternate = GPIO_AF7_USART3;
    HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);

  /* USER CODE BEGIN USART3_MspInit 1 */

  /* USER CODE END USART3_MspInit 1 */
  }

}

/**
* @brief UART MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param huart: UART handle pointer
* @retval None
*/

void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
{

  if(huart->Instance==USART3)
  {
  /* USER CODE BEGIN USART3_MspDeInit 0 */

  /* USER CODE END USART3_MspDeInit 0 */
    /* Peripheral clock disable */
    __HAL_RCC_USART3_CLK_DISABLE();

    /**USART3 GPIO Configuration
    PB11     ------> USART3_RX
    PB10     ------> USART3_TX
    */
    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_11|GPIO_PIN_10);

  /* USER CODE BEGIN USART3_MspDeInit 1 */

  /* USER CODE END USART3_MspDeInit 1 */
  }

}

static uint32_t FMC_Initialized = 0;

static void HAL_FMC_MspInit(void){
  /* USER CODE BEGIN FMC_MspInit 0 */

  /* USER CODE END FMC_MspInit 0 */
  GPIO_InitTypeDef GPIO_InitStruct;
  if (FMC_Initialized) {
    return;
  }
  FMC_Initialized = 1;
  /* Peripheral clock enable */
  __HAL_RCC_FMC_CLK_ENABLE();

  /** FMC GPIO Configuration
  PE0   ------> FMC_NBL0
  PE1   ------> FMC_NBL1
  PD0   ------> FMC_D2
  PD4   ------> FMC_NOE
  PD1   ------> FMC_D3
  PE4   ------> FMC_A20
  PE3   ------> FMC_A19
  PD5   ------> FMC_NWE
  PE5   ------> FMC_A21
  PF2   ------> FMC_A2
  PF1   ------> FMC_A1
  PF0   ------> FMC_A0
  PD7   ------> FMC_NE1
  PF3   ------> FMC_A3
  PF4   ------> FMC_A4
  PF5   ------> FMC_A5
  PG4   ------> FMC_A14
  PG3   ------> FMC_A13
  PG5   ------> FMC_A15
  PG1   ------> FMC_A11
  PE10   ------> FMC_D7
  PD13   ------> FMC_A18
  PG2   ------> FMC_A12
  PD15   ------> FMC_D1
  PD14   ------> FMC_D0
  PG0   ------> FMC_A10
  PE9   ------> FMC_D6
  PE15   ------> FMC_D12
  PD12   ------> FMC_A17
  PD11   ------> FMC_A16
  PD10   ------> FMC_D15
  PF15   ------> FMC_A9
  PE8   ------> FMC_D5
  PE14   ------> FMC_D11
  PD9   ------> FMC_D14
  PD8   ------> FMC_D13
  PF14   ------> FMC_A8
  PE7   ------> FMC_D4
  PE13   ------> FMC_D10
  PF13   ------> FMC_A7
  PE12   ------> FMC_D9
  PF12   ------> FMC_A6
  PE11   ------> FMC_D8
  */
  GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_4|GPIO_PIN_3
                          |GPIO_PIN_5|GPIO_PIN_10|GPIO_PIN_9|GPIO_PIN_15
                          |GPIO_PIN_8|GPIO_PIN_14|GPIO_PIN_7|GPIO_PIN_13
                          |GPIO_PIN_12|GPIO_PIN_11;
  GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
  GPIO_InitStruct.Pull = GPIO_NOPULL;
  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
  GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
  HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);

  GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_4|GPIO_PIN_1|GPIO_PIN_5
                          |GPIO_PIN_7|GPIO_PIN_13|GPIO_PIN_15|GPIO_PIN_14
                          |GPIO_PIN_12|GPIO_PIN_11|GPIO_PIN_10|GPIO_PIN_9
                          |GPIO_PIN_8;
  GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
  GPIO_InitStruct.Pull = GPIO_NOPULL;
  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
  GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
  HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);

  GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_1|GPIO_PIN_0|GPIO_PIN_3
                          |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_15|GPIO_PIN_14
                          |GPIO_PIN_13|GPIO_PIN_12;
  GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
  GPIO_InitStruct.Pull = GPIO_NOPULL;
  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
  GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
  HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);

  GPIO_InitStruct.Pin = GPIO_PIN_4|GPIO_PIN_3|GPIO_PIN_5|GPIO_PIN_1
                          |GPIO_PIN_2|GPIO_PIN_0;
  GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
  GPIO_InitStruct.Pull = GPIO_NOPULL;
  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
  GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
  HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);

  /* USER CODE BEGIN FMC_MspInit 1 */

  /* USER CODE END FMC_MspInit 1 */
}

void HAL_SRAM_MspInit(SRAM_HandleTypeDef* hsram){
  /* USER CODE BEGIN SRAM_MspInit 0 */

  /* USER CODE END SRAM_MspInit 0 */
  HAL_FMC_MspInit();
  /* USER CODE BEGIN SRAM_MspInit 1 */

  /* USER CODE END SRAM_MspInit 1 */
}

static uint32_t FMC_DeInitialized = 0;

static void HAL_FMC_MspDeInit(void){
  /* USER CODE BEGIN FMC_MspDeInit 0 */

  /* USER CODE END FMC_MspDeInit 0 */
  if (FMC_DeInitialized) {
    return;
  }
  FMC_DeInitialized = 1;
  /* Peripheral clock enable */
  __HAL_RCC_FMC_CLK_DISABLE();

  /** FMC GPIO Configuration
  PE0   ------> FMC_NBL0
  PE1   ------> FMC_NBL1
  PD0   ------> FMC_D2
  PD4   ------> FMC_NOE
  PD1   ------> FMC_D3
  PE4   ------> FMC_A20
  PE3   ------> FMC_A19
  PD5   ------> FMC_NWE
  PE5   ------> FMC_A21
  PF2   ------> FMC_A2
  PF1   ------> FMC_A1
  PF0   ------> FMC_A0
  PD7   ------> FMC_NE1
  PF3   ------> FMC_A3
  PF4   ------> FMC_A4
  PF5   ------> FMC_A5
  PG4   ------> FMC_A14
  PG3   ------> FMC_A13
  PG5   ------> FMC_A15
  PG1   ------> FMC_A11
  PE10   ------> FMC_D7
  PD13   ------> FMC_A18
  PG2   ------> FMC_A12
  PD15   ------> FMC_D1
  PD14   ------> FMC_D0
  PG0   ------> FMC_A10
  PE9   ------> FMC_D6
  PE15   ------> FMC_D12
  PD12   ------> FMC_A17
  PD11   ------> FMC_A16
  PD10   ------> FMC_D15
  PF15   ------> FMC_A9
  PE8   ------> FMC_D5
  PE14   ------> FMC_D11
  PD9   ------> FMC_D14
  PD8   ------> FMC_D13
  PF14   ------> FMC_A8
  PE7   ------> FMC_D4
  PE13   ------> FMC_D10
  PF13   ------> FMC_A7
  PE12   ------> FMC_D9
  PF12   ------> FMC_A6
  PE11   ------> FMC_D8
  */
  HAL_GPIO_DeInit(GPIOE, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_4|GPIO_PIN_3
                          |GPIO_PIN_5|GPIO_PIN_10|GPIO_PIN_9|GPIO_PIN_15
                          |GPIO_PIN_8|GPIO_PIN_14|GPIO_PIN_7|GPIO_PIN_13
                          |GPIO_PIN_12|GPIO_PIN_11);

  HAL_GPIO_DeInit(GPIOD, GPIO_PIN_0|GPIO_PIN_4|GPIO_PIN_1|GPIO_PIN_5
                          |GPIO_PIN_7|GPIO_PIN_13|GPIO_PIN_15|GPIO_PIN_14
                          |GPIO_PIN_12|GPIO_PIN_11|GPIO_PIN_10|GPIO_PIN_9
                          |GPIO_PIN_8);

  HAL_GPIO_DeInit(GPIOF, GPIO_PIN_2|GPIO_PIN_1|GPIO_PIN_0|GPIO_PIN_3
                          |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_15|GPIO_PIN_14
                          |GPIO_PIN_13|GPIO_PIN_12);

  HAL_GPIO_DeInit(GPIOG, GPIO_PIN_4|GPIO_PIN_3|GPIO_PIN_5|GPIO_PIN_1
                          |GPIO_PIN_2|GPIO_PIN_0);

  /* USER CODE BEGIN FMC_MspDeInit 1 */

  /* USER CODE END FMC_MspDeInit 1 */
}

void HAL_SRAM_MspDeInit(SRAM_HandleTypeDef* hsram){
  /* USER CODE BEGIN SRAM_MspDeInit 0 */

  /* USER CODE END SRAM_MspDeInit 0 */
  HAL_FMC_MspDeInit();
  /* USER CODE BEGIN SRAM_MspDeInit 1 */

  /* USER CODE END SRAM_MspDeInit 1 */
}

/* USER CODE BEGIN 1 */

/* USER CODE END 1 */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/