|
|
@@ -0,0 +1,649 @@
|
|
|
+/*
|
|
|
+ Linker File for Renesas FSP
|
|
|
+*/
|
|
|
+
|
|
|
+INCLUDE memory_regions.ld
|
|
|
+
|
|
|
+/* Uncomment and set XIP_SECONDARY_SLOT_IMAGE to 1 below for the secondary XIP application image.*/
|
|
|
+/*
|
|
|
+ XIP_SECONDARY_SLOT_IMAGE = 1;
|
|
|
+*/
|
|
|
+
|
|
|
+QSPI_FLASH_PRV_LENGTH = DEFINED(QSPI_FLASH_SIZE) ? ABSOLUTE(QSPI_FLASH_SIZE) : ABSOLUTE(QSPI_FLASH_LENGTH);
|
|
|
+OSPI_DEVICE_0_PRV_LENGTH = DEFINED(OSPI_DEVICE_0_SIZE) ? ABSOLUTE(OSPI_DEVICE_0_SIZE) : ABSOLUTE(OSPI_DEVICE_0_LENGTH);
|
|
|
+OSPI_DEVICE_1_PRV_LENGTH = DEFINED(OSPI_DEVICE_1_SIZE) ? ABSOLUTE(OSPI_DEVICE_1_SIZE) : ABSOLUTE(OSPI_DEVICE_1_LENGTH);
|
|
|
+
|
|
|
+/* If a flat (secure) project has DEFINED RAM_NS_BUFFER_LENGTH, then emit IDAU symbols to allocate non-secure RAM. */
|
|
|
+__RESERVE_NS_RAM = !DEFINED(PROJECT_NONSECURE) && DEFINED(RAM_NS_BUFFER_LENGTH) && (OPTION_SETTING_S_LENGTH != 0);
|
|
|
+
|
|
|
+RAM_NS_BUFFER_BLOCK_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? ALIGN(RAM_NS_BUFFER_LENGTH, 8192) : 0;
|
|
|
+RAM_NS_BUFFER_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? RAM_NS_BUFFER_LENGTH : 0;
|
|
|
+RAM_NS_BUFFER_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_LENGTH;
|
|
|
+RAM_NS_BUFFER_BLOCK_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_BLOCK_LENGTH;
|
|
|
+
|
|
|
+OPTION_SETTING_START_NS = 0x0100A180;
|
|
|
+
|
|
|
+/* This definition is used to avoid moving the counter in OPTION_SETTING regions for projects that should not configure option settings.
|
|
|
+ * Bootloader images do not configure option settings because they are owned by the bootloader.
|
|
|
+ * FSP_BOOTABLE_IMAGE is only defined in bootloader images. */
|
|
|
+__bl_FSP_BOOTABLE_IMAGE = 1;
|
|
|
+__bln_FSP_BOOTABLE_IMAGE = 1;
|
|
|
+PROJECT_SECURE_OR_FLAT = !DEFINED(PROJECT_NONSECURE) && OPTION_SETTING_LENGTH && !DEFINED(FSP_BOOTABLE_IMAGE);
|
|
|
+USE_OPTION_SETTING_NS = DEFINED(PROJECT_NONSECURE) && !DEFINED(FSP_BOOTABLE_IMAGE);
|
|
|
+
|
|
|
+__bl_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 :
|
|
|
+ FLASH_APPLICATION_IMAGE_NUMBER == 1 ? FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH :
|
|
|
+ FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH;
|
|
|
+__bl_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 :
|
|
|
+ FLASH_APPLICATION_S_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH;
|
|
|
+__bl_FLASH_IMAGE_END = __bl_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH;
|
|
|
+__bl_XIP_SECONDARY_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 :
|
|
|
+ FLASH_BOOTLOADER_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH;
|
|
|
+__bl_XIP_SECONDARY_FLASH_IMAGE_END = __bl_XIP_SECONDARY_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH;
|
|
|
+__bl_FLASH_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 :
|
|
|
+ FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END :
|
|
|
+ __bl_FLASH_IMAGE_START - FLASH_BOOTLOADER_HEADER_LENGTH + FLASH_APPLICATION_S_LENGTH;
|
|
|
+__bl_FLASH_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 :
|
|
|
+ FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END :
|
|
|
+ __bl_FLASH_NS_START - FLASH_APPLICATION_NSC_LENGTH;
|
|
|
+__bl_RAM_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 :
|
|
|
+ FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH :
|
|
|
+ RAM_START + RAM_LENGTH - RAM_APPLICATION_NS_LENGTH;
|
|
|
+__bl_RAM_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 :
|
|
|
+ FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH :
|
|
|
+ __bl_RAM_NS_START - RAM_APPLICATION_NSC_LENGTH;
|
|
|
+__bl_FLASH_NS_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 :
|
|
|
+ FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END :
|
|
|
+ __bl_FLASH_NS_START + FLASH_BOOTLOADER_HEADER_LENGTH_2;
|
|
|
+__bln_FLASH_IMAGE_START = __bl_FLASH_NS_IMAGE_START;
|
|
|
+__bln_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 :
|
|
|
+ FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END :
|
|
|
+ FLASH_APPLICATION_NS_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH_2;
|
|
|
+
|
|
|
+XIP_SECONDARY_SLOT_IMAGE = DEFINED(XIP_SECONDARY_SLOT_IMAGE) ? XIP_SECONDARY_SLOT_IMAGE : 0;
|
|
|
+FLASH_ORIGIN = !DEFINED(FLASH_IMAGE_START) ? FLASH_START :
|
|
|
+ XIP_SECONDARY_SLOT_IMAGE == 1 ? XIP_SECONDARY_FLASH_IMAGE_START :
|
|
|
+ FLASH_IMAGE_START;
|
|
|
+LIMITED_FLASH_LENGTH = DEFINED(FLASH_IMAGE_LENGTH) ? FLASH_IMAGE_LENGTH :
|
|
|
+ DEFINED(FLASH_BOOTLOADER_LENGTH) ? FLASH_BOOTLOADER_LENGTH :
|
|
|
+ FLASH_LENGTH;
|
|
|
+
|
|
|
+/* Define memory regions. */
|
|
|
+MEMORY
|
|
|
+{
|
|
|
+ FLASH (rx) : ORIGIN = FLASH_ORIGIN, LENGTH = LIMITED_FLASH_LENGTH
|
|
|
+ RAM (rwx) : ORIGIN = RAM_START, LENGTH = RAM_LENGTH
|
|
|
+ DATA_FLASH (rx) : ORIGIN = DATA_FLASH_START, LENGTH = DATA_FLASH_LENGTH
|
|
|
+ QSPI_FLASH (rx) : ORIGIN = QSPI_FLASH_START, LENGTH = QSPI_FLASH_PRV_LENGTH
|
|
|
+ OSPI_DEVICE_0 (rx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH
|
|
|
+ OSPI_DEVICE_1 (rx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH
|
|
|
+ OSPI_DEVICE_0_RAM (rwx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH
|
|
|
+ OSPI_DEVICE_1_RAM (rwx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH
|
|
|
+ SDRAM (rwx) : ORIGIN = SDRAM_START, LENGTH = SDRAM_LENGTH
|
|
|
+ OPTION_SETTING (r): ORIGIN = OPTION_SETTING_START, LENGTH = OPTION_SETTING_LENGTH
|
|
|
+ OPTION_SETTING_S (r): ORIGIN = OPTION_SETTING_S_START, LENGTH = OPTION_SETTING_S_LENGTH
|
|
|
+ ID_CODE (rx) : ORIGIN = ID_CODE_START, LENGTH = ID_CODE_LENGTH
|
|
|
+}
|
|
|
+
|
|
|
+/* Library configurations */
|
|
|
+GROUP(libgcc.a libc.a libm.a libnosys.a)
|
|
|
+
|
|
|
+/* Linker script to place sections and symbol values. Should be used together
|
|
|
+ * with other linker script that defines memory regions FLASH and RAM.
|
|
|
+ * It references following symbols, which must be DEFINED in code:
|
|
|
+ * Reset_Handler : Entry of reset handler
|
|
|
+ *
|
|
|
+ * It defines following symbols, which code can use without definition:
|
|
|
+ * __exidx_start
|
|
|
+ * __exidx_end
|
|
|
+ * __copy_table_start__
|
|
|
+ * __copy_table_end__
|
|
|
+ * __zero_table_start__
|
|
|
+ * __zero_table_end__
|
|
|
+ * __etext
|
|
|
+ * __data_start__
|
|
|
+ * __preinit_array_start
|
|
|
+ * __preinit_array_end
|
|
|
+ * __init_array_start
|
|
|
+ * __init_array_end
|
|
|
+ * __fini_array_start
|
|
|
+ * __fini_array_end
|
|
|
+ * __data_end__
|
|
|
+ * __bss_start__
|
|
|
+ * __bss_end__
|
|
|
+ * __HeapLimit
|
|
|
+ * __StackLimit
|
|
|
+ * __StackTop
|
|
|
+ * __stack
|
|
|
+ * __Vectors_End
|
|
|
+ * __Vectors_Size
|
|
|
+ * __qspi_flash_start__
|
|
|
+ * __qspi_flash_end__
|
|
|
+ * __qspi_flash_code_size__
|
|
|
+ * __qspi_region_max_size__
|
|
|
+ * __qspi_region_start_address__
|
|
|
+ * __qspi_region_end_address__
|
|
|
+ * __ospi_device_0_start__
|
|
|
+ * __ospi_device_0_end__
|
|
|
+ * __ospi_device_0_code_size__
|
|
|
+ * __ospi_device_0_region_max_size__
|
|
|
+ * __ospi_device_0_region_start_address__
|
|
|
+ * __ospi_device_0_region_end_address__
|
|
|
+ * __ospi_device_1_start__
|
|
|
+ * __ospi_device_1_end__
|
|
|
+ * __ospi_device_1_code_size__
|
|
|
+ * __ospi_device_1_region_max_size__
|
|
|
+ * __ospi_device_1_region_start_address__
|
|
|
+ * __ospi_device_1_region_end_address__
|
|
|
+ */
|
|
|
+ENTRY(Reset_Handler)
|
|
|
+
|
|
|
+SECTIONS
|
|
|
+{
|
|
|
+ .text :
|
|
|
+ {
|
|
|
+ __tz_FLASH_S = ABSOLUTE(FLASH_START);
|
|
|
+ __ROM_Start = .;
|
|
|
+
|
|
|
+ /* Even though the vector table is not 256 entries (1KB) long, we still allocate that much
|
|
|
+ * space because ROM registers are at address 0x400 and there is very little space
|
|
|
+ * in between. */
|
|
|
+ KEEP(*(.fixed_vectors*))
|
|
|
+ KEEP(*(.application_vectors*))
|
|
|
+ __Vectors_End = .;
|
|
|
+
|
|
|
+ /* ROM Registers start at address 0x00000400 for devices that do not have the OPTION_SETTING region. */
|
|
|
+ . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x400;
|
|
|
+ KEEP(*(.rom_registers*))
|
|
|
+
|
|
|
+ /* Reserving 0x100 bytes of space for ROM registers. */
|
|
|
+ . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x500;
|
|
|
+
|
|
|
+ /* Allocate flash write-boundary-aligned
|
|
|
+ * space for sce9 wrapped public keys for mcuboot if the module is used.
|
|
|
+ */
|
|
|
+ . = ALIGN(128);
|
|
|
+ KEEP(*(.mcuboot_sce9_key*))
|
|
|
+
|
|
|
+ *(.text*)
|
|
|
+
|
|
|
+ KEEP(*(.version))
|
|
|
+ KEEP(*(.init))
|
|
|
+ KEEP(*(.fini))
|
|
|
+
|
|
|
+ /* section information for finsh shell */
|
|
|
+ . = ALIGN(4);
|
|
|
+ __fsymtab_start = .;
|
|
|
+ KEEP(*(FSymTab))
|
|
|
+ __fsymtab_end = .;
|
|
|
+
|
|
|
+ . = ALIGN(4);
|
|
|
+ __vsymtab_start = .;
|
|
|
+ KEEP(*(VSymTab))
|
|
|
+ __vsymtab_end = .;
|
|
|
+
|
|
|
+ /* section information for initial. */
|
|
|
+ . = ALIGN(4);
|
|
|
+ __rt_init_start = .;
|
|
|
+ KEEP(*(SORT(.rti_fn*)))
|
|
|
+ __rt_init_end = .;
|
|
|
+
|
|
|
+ . = ALIGN(4);
|
|
|
+ KEEP(*(FalPartTable))
|
|
|
+
|
|
|
+ /* .ctors */
|
|
|
+ *crtbegin.o(.ctors)
|
|
|
+ *crtbegin?.o(.ctors)
|
|
|
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
|
|
|
+ *(SORT(.ctors.*))
|
|
|
+ *(.ctors)
|
|
|
+
|
|
|
+ /* .dtors */
|
|
|
+ *crtbegin.o(.dtors)
|
|
|
+ *crtbegin?.o(.dtors)
|
|
|
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
|
|
|
+ *(SORT(.dtors.*))
|
|
|
+ *(.dtors)
|
|
|
+
|
|
|
+ *(.rodata*)
|
|
|
+ __usb_dev_descriptor_start_fs = .;
|
|
|
+ KEEP(*(.usb_device_desc_fs*))
|
|
|
+ __usb_cfg_descriptor_start_fs = .;
|
|
|
+ KEEP(*(.usb_config_desc_fs*))
|
|
|
+ __usb_interface_descriptor_start_fs = .;
|
|
|
+ KEEP(*(.usb_interface_desc_fs*))
|
|
|
+ __usb_descriptor_end_fs = .;
|
|
|
+ __usb_dev_descriptor_start_hs = .;
|
|
|
+ KEEP(*(.usb_device_desc_hs*))
|
|
|
+ __usb_cfg_descriptor_start_hs = .;
|
|
|
+ KEEP(*(.usb_config_desc_hs*))
|
|
|
+ __usb_interface_descriptor_start_hs = .;
|
|
|
+ KEEP(*(.usb_interface_desc_hs*))
|
|
|
+ __usb_descriptor_end_hs = .;
|
|
|
+
|
|
|
+ KEEP(*(.eh_frame*))
|
|
|
+
|
|
|
+ __ROM_End = .;
|
|
|
+ } > FLASH = 0xFF
|
|
|
+
|
|
|
+ __Vectors_Size = __Vectors_End - __Vectors;
|
|
|
+
|
|
|
+ .ARM.extab :
|
|
|
+ {
|
|
|
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
|
|
|
+ } > FLASH
|
|
|
+
|
|
|
+ __exidx_start = .;
|
|
|
+ .ARM.exidx :
|
|
|
+ {
|
|
|
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
|
|
|
+ } > FLASH
|
|
|
+ __exidx_end = .;
|
|
|
+
|
|
|
+ /* To copy multiple ROM to RAM sections,
|
|
|
+ * uncomment .copy.table section and,
|
|
|
+ * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */
|
|
|
+ /*
|
|
|
+ .copy.table :
|
|
|
+ {
|
|
|
+ . = ALIGN(4);
|
|
|
+ __copy_table_start__ = .;
|
|
|
+ LONG (__etext)
|
|
|
+ LONG (__data_start__)
|
|
|
+ LONG (__data_end__ - __data_start__)
|
|
|
+ LONG (__etext2)
|
|
|
+ LONG (__data2_start__)
|
|
|
+ LONG (__data2_end__ - __data2_start__)
|
|
|
+ __copy_table_end__ = .;
|
|
|
+ } > FLASH
|
|
|
+ */
|
|
|
+
|
|
|
+ /* To clear multiple BSS sections,
|
|
|
+ * uncomment .zero.table section and,
|
|
|
+ * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */
|
|
|
+ /*
|
|
|
+ .zero.table :
|
|
|
+ {
|
|
|
+ . = ALIGN(4);
|
|
|
+ __zero_table_start__ = .;
|
|
|
+ LONG (__bss_start__)
|
|
|
+ LONG (__bss_end__ - __bss_start__)
|
|
|
+ LONG (__bss2_start__)
|
|
|
+ LONG (__bss2_end__ - __bss2_start__)
|
|
|
+ __zero_table_end__ = .;
|
|
|
+ } > FLASH
|
|
|
+ */
|
|
|
+
|
|
|
+ __etext = .;
|
|
|
+
|
|
|
+ __tz_RAM_S = ORIGIN(RAM);
|
|
|
+
|
|
|
+ /* If DTC is used, put the DTC vector table at the start of SRAM.
|
|
|
+ This avoids memory holes due to 1K alignment required by it. */
|
|
|
+ .fsp_dtc_vector_table (NOLOAD) :
|
|
|
+ {
|
|
|
+ . = ORIGIN(RAM);
|
|
|
+ *(.fsp_dtc_vector_table)
|
|
|
+ } > RAM
|
|
|
+
|
|
|
+ /* Initialized data section. */
|
|
|
+ .data :
|
|
|
+ {
|
|
|
+ __data_start__ = .;
|
|
|
+ . = ALIGN(4);
|
|
|
+
|
|
|
+ __Code_In_RAM_Start = .;
|
|
|
+
|
|
|
+ KEEP(*(.code_in_ram*))
|
|
|
+ __Code_In_RAM_End = .;
|
|
|
+
|
|
|
+ *(vtable)
|
|
|
+ /* Don't use *(.data*) because it will place data meant for .data_flash in this section. */
|
|
|
+ *(.data.*)
|
|
|
+ *(.data)
|
|
|
+
|
|
|
+ . = ALIGN(4);
|
|
|
+ /* preinit data */
|
|
|
+ PROVIDE_HIDDEN (__preinit_array_start = .);
|
|
|
+ KEEP(*(.preinit_array))
|
|
|
+ PROVIDE_HIDDEN (__preinit_array_end = .);
|
|
|
+
|
|
|
+ . = ALIGN(4);
|
|
|
+ /* init data */
|
|
|
+ PROVIDE_HIDDEN (__init_array_start = .);
|
|
|
+ KEEP(*(SORT(.init_array.*)))
|
|
|
+ KEEP(*(.init_array))
|
|
|
+ PROVIDE_HIDDEN (__init_array_end = .);
|
|
|
+
|
|
|
+
|
|
|
+ . = ALIGN(4);
|
|
|
+ /* finit data */
|
|
|
+ PROVIDE_HIDDEN (__fini_array_start = .);
|
|
|
+ KEEP(*(SORT(.fini_array.*)))
|
|
|
+ KEEP(*(.fini_array))
|
|
|
+ PROVIDE_HIDDEN (__fini_array_end = .);
|
|
|
+
|
|
|
+ KEEP(*(.jcr*))
|
|
|
+
|
|
|
+ . = ALIGN(4);
|
|
|
+
|
|
|
+ /* All data end */
|
|
|
+ __data_end__ = .;
|
|
|
+
|
|
|
+ } > RAM AT > FLASH
|
|
|
+
|
|
|
+
|
|
|
+ /* TrustZone Secure Gateway Stubs Section. */
|
|
|
+
|
|
|
+ /* Some arithmetic is needed to eliminate unnecessary FILL for secure projects. */
|
|
|
+ /* 1. Get the address to the next block after the .data section in FLASH. */
|
|
|
+ DATA_END = LOADADDR(.data) + SIZEOF(.data);
|
|
|
+ /* 2. Determine the secure gateway stubs address either by the provided linker variable or the next 1024-byte block after .data */
|
|
|
+ SGSTUBS_LOC = (DEFINED(PROJECT_SECURE) && DEFINED(FLASH_NSC_START)) ? ABSOLUTE(FLASH_NSC_START) : ALIGN(DATA_END, 1024);
|
|
|
+ /* 3. Manually specify the start location for .gnu.sgstubs */
|
|
|
+ .gnu.sgstubs SGSTUBS_LOC : ALIGN(1024)
|
|
|
+ {
|
|
|
+ __tz_FLASH_C = DEFINED(FLASH_NSC_START) ? ABSOLUTE(FLASH_NSC_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : ALIGN(1024);
|
|
|
+ _start_sg = .;
|
|
|
+ *(.gnu.sgstubs*)
|
|
|
+ . = ALIGN(32);
|
|
|
+ _end_sg = .;
|
|
|
+ } > FLASH
|
|
|
+
|
|
|
+ __tz_FLASH_N = DEFINED(FLASH_NS_START) ? ABSOLUTE(FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : FLASH_LENGTH < 32768 ? FLASH_LENGTH : ALIGN(32768);
|
|
|
+ FLASH_NS_IMAGE_START = DEFINED(FLASH_NS_IMAGE_START) ? FLASH_NS_IMAGE_START : __tz_FLASH_N;
|
|
|
+
|
|
|
+ /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */
|
|
|
+ __tz_QSPI_FLASH_S = ORIGIN(QSPI_FLASH);
|
|
|
+
|
|
|
+ /* QSPI_FLASH section to be downloaded via debugger */
|
|
|
+ .qspi_flash :
|
|
|
+ {
|
|
|
+ __qspi_flash_start__ = .;
|
|
|
+ KEEP(*(.qspi_flash*))
|
|
|
+ KEEP(*(.code_in_qspi*))
|
|
|
+ __qspi_flash_end__ = .;
|
|
|
+ } > QSPI_FLASH
|
|
|
+ __qspi_flash_code_size__ = __qspi_flash_end__ - __qspi_flash_start__;
|
|
|
+
|
|
|
+ /* QSPI_FLASH non-retentive section, creates a copy in internal flash that can be copied to QSPI */
|
|
|
+ __qspi_flash_code_addr__ = __etext + (__data_end__ - __data_start__);
|
|
|
+ .qspi_non_retentive : AT (__qspi_flash_code_addr__)
|
|
|
+ {
|
|
|
+ __qspi_non_retentive_start__ = .;
|
|
|
+ KEEP(*(.qspi_non_retentive*))
|
|
|
+ __qspi_non_retentive_end__ = .;
|
|
|
+ } > QSPI_FLASH
|
|
|
+ __qspi_non_retentive_size__ = __qspi_non_retentive_end__ - __qspi_non_retentive_start__;
|
|
|
+
|
|
|
+ __qspi_region_max_size__ = 0x4000000; /* Must be the same as defined in MEMORY above */
|
|
|
+ __qspi_region_start_address__ = __qspi_flash_start__;
|
|
|
+ __qspi_region_end_address__ = __qspi_flash_start__ + __qspi_region_max_size__;
|
|
|
+
|
|
|
+ /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */
|
|
|
+ __tz_QSPI_FLASH_N = __qspi_non_retentive_end__;
|
|
|
+
|
|
|
+ /* Support for OctaRAM */
|
|
|
+ .OSPI_DEVICE_0_NO_LOAD (NOLOAD):
|
|
|
+ {
|
|
|
+ . = ALIGN(4);
|
|
|
+ __ospi_device_0_start__ = .;
|
|
|
+ *(.ospi_device_0_no_load*)
|
|
|
+ . = ALIGN(4);
|
|
|
+ __ospi_device_0_end__ = .;
|
|
|
+ } > OSPI_DEVICE_0_RAM
|
|
|
+
|
|
|
+ .OSPI_DEVICE_1_NO_LOAD (NOLOAD):
|
|
|
+ {
|
|
|
+ . = ALIGN(4);
|
|
|
+ __ospi_device_1_start__ = .;
|
|
|
+ *(.ospi_device_1_no_load*)
|
|
|
+ . = ALIGN(4);
|
|
|
+ __ospi_device_1_end__ = .;
|
|
|
+ } > OSPI_DEVICE_1_RAM
|
|
|
+
|
|
|
+ /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */
|
|
|
+ __tz_OSPI_DEVICE_0_S = ORIGIN(OSPI_DEVICE_0);
|
|
|
+
|
|
|
+ /* OSPI_DEVICE_0 section to be downloaded via debugger */
|
|
|
+ .OSPI_DEVICE_0 :
|
|
|
+ {
|
|
|
+ __ospi_device_0_start__ = .;
|
|
|
+ KEEP(*(.ospi_device_0*))
|
|
|
+ KEEP(*(.code_in_ospi_device_0*))
|
|
|
+ __ospi_device_0_end__ = .;
|
|
|
+ } > OSPI_DEVICE_0
|
|
|
+ __ospi_device_0_code_size__ = __ospi_device_0_end__ - __ospi_device_0_start__;
|
|
|
+
|
|
|
+ /* OSPI_DEVICE_0 non-retentive section, creates a copy in internal flash that can be copied to OSPI */
|
|
|
+ __ospi_device_0_code_addr__ = __etext + (__data_end__ - __data_start__);
|
|
|
+ .ospi_device_0_non_retentive : AT (__ospi_device_0_code_addr__)
|
|
|
+ {
|
|
|
+ __ospi_device_0_non_retentive_start__ = .;
|
|
|
+ KEEP(*(.ospi_device_0_non_retentive*))
|
|
|
+ __ospi_device_0_non_retentive_end__ = .;
|
|
|
+ } > OSPI_DEVICE_0
|
|
|
+ __ospi_device_0_non_retentive_size__ = __ospi_device_0_non_retentive_end__ - __ospi_device_0_non_retentive_start__;
|
|
|
+
|
|
|
+ __ospi_device_0_region_max_size__ = 0x8000000; /* Must be the same as defined in MEMORY above */
|
|
|
+ __ospi_device_0_region_start_address__ = __ospi_device_0_start__;
|
|
|
+ __ospi_device_0_region_end_address__ = __ospi_device_0_start__ + __ospi_device_0_region_max_size__;
|
|
|
+
|
|
|
+ /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */
|
|
|
+ __tz_OSPI_DEVICE_0_N = __ospi_device_0_non_retentive_end__;
|
|
|
+
|
|
|
+ /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */
|
|
|
+ __tz_OSPI_DEVICE_1_S = ORIGIN(OSPI_DEVICE_1);
|
|
|
+
|
|
|
+ /* OSPI_DEVICE_1 section to be downloaded via debugger */
|
|
|
+ .OSPI_DEVICE_1 :
|
|
|
+ {
|
|
|
+ __ospi_device_1_start__ = .;
|
|
|
+ KEEP(*(.ospi_device_1*))
|
|
|
+ KEEP(*(.code_in_ospi_device_1*))
|
|
|
+ __ospi_device_1_end__ = .;
|
|
|
+ } > OSPI_DEVICE_1
|
|
|
+ __ospi_device_1_code_size__ = __ospi_device_1_end__ - __ospi_device_1_start__;
|
|
|
+
|
|
|
+ /* OSPI_DEVICE_1 non-retentive section, creates a copy in internal flash that can be copied to OSPI */
|
|
|
+ __ospi_device_1_code_addr__ = __etext + (__data_end__ - __data_start__);
|
|
|
+ .ospi_device_1_non_retentive : AT (__ospi_device_1_code_addr__)
|
|
|
+ {
|
|
|
+ __ospi_device_1_non_retentive_start__ = .;
|
|
|
+ KEEP(*(.ospi_device_1_non_retentive*))
|
|
|
+ __ospi_device_1_non_retentive_end__ = .;
|
|
|
+ } > OSPI_DEVICE_1
|
|
|
+ __ospi_device_1_non_retentive_size__ = __ospi_device_1_non_retentive_end__ - __ospi_device_1_non_retentive_start__;
|
|
|
+
|
|
|
+ __ospi_device_1_region_max_size__ = 0x10000000; /* Must be the same as defined in MEMORY above */
|
|
|
+ __ospi_device_1_region_start_address__ = __ospi_device_1_start__;
|
|
|
+ __ospi_device_1_region_end_address__ = __ospi_device_1_start__ + __ospi_device_1_region_max_size__;
|
|
|
+
|
|
|
+ /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */
|
|
|
+ __tz_OSPI_DEVICE_1_N = __ospi_device_1_non_retentive_end__;
|
|
|
+
|
|
|
+ .noinit (NOLOAD):
|
|
|
+ {
|
|
|
+ . = ALIGN(4);
|
|
|
+ __noinit_start = .;
|
|
|
+ KEEP(*(.noinit*))
|
|
|
+ . = ALIGN(8);
|
|
|
+ /* Place the FreeRTOS heap here so that the __HeapLimit calculation does not include the freertos heap. */
|
|
|
+ KEEP(*(.heap.*))
|
|
|
+ __noinit_end = .;
|
|
|
+ } > RAM
|
|
|
+
|
|
|
+ .bss :
|
|
|
+ {
|
|
|
+ . = ALIGN(4);
|
|
|
+ __bss_start__ = .;
|
|
|
+ *(.bss*)
|
|
|
+ *(COMMON)
|
|
|
+ . = ALIGN(4);
|
|
|
+ __bss_end__ = .;
|
|
|
+ } > RAM
|
|
|
+
|
|
|
+ .heap (NOLOAD):
|
|
|
+ {
|
|
|
+ . = ALIGN(8);
|
|
|
+ __HeapBase = .;
|
|
|
+ /* Place the STD heap here. */
|
|
|
+ KEEP(*(.heap))
|
|
|
+ __HeapLimit = .;
|
|
|
+ } > RAM
|
|
|
+
|
|
|
+ /* Stacks are stored in this section. */
|
|
|
+ .stack_dummy (NOLOAD):
|
|
|
+ {
|
|
|
+ . = ALIGN(8);
|
|
|
+ __StackLimit = .;
|
|
|
+ /* Main stack */
|
|
|
+ KEEP(*(.stack))
|
|
|
+ __StackTop = .;
|
|
|
+ /* Thread stacks */
|
|
|
+ KEEP(*(.stack*))
|
|
|
+ __StackTopAll = .;
|
|
|
+ } > RAM
|
|
|
+
|
|
|
+ PROVIDE(__stack = __StackTopAll);
|
|
|
+
|
|
|
+ /* This symbol represents the end of user allocated RAM. The RAM after this symbol can be used
|
|
|
+ at run time for things such as ThreadX memory pool allocations. */
|
|
|
+ __RAM_segment_used_end__ = ALIGN(__StackTopAll , 4);
|
|
|
+
|
|
|
+ /* RAM_NSC_START can be used to set a fixed address for non-secure callable RAM in secure projects.
|
|
|
+ * If it is not specified, the address for NSC RAM is the end of RAM aligned to a 1K boundary.
|
|
|
+ * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */
|
|
|
+ __tz_RAM_C = DEFINED(RAM_NSC_START) ? ABSOLUTE(RAM_NSC_START) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__RAM_segment_used_end__, 1024);
|
|
|
+
|
|
|
+ /* RAM_NS_START can be used to set a fixed address for non-secure RAM in secure projects or flat projects.
|
|
|
+ * RAM_NS_BUFFER_BLOCK_LENGTH is used to allocate non-secure buffers in a flat project. If it is not
|
|
|
+ * specified, the address for NSC RAM is the end of RAM aligned to an 8K boundary.
|
|
|
+ * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */
|
|
|
+ __tz_RAM_N = DEFINED(RAM_NS_START) ? ABSOLUTE(RAM_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__tz_RAM_C, 8192);
|
|
|
+
|
|
|
+ /* Non-secure buffers must be in non-secure RAM. This is primarily used for the EDMAC in flat projects.
|
|
|
+ * The EDMAC is a non-secure bus master and can only access non-secure RAM. */
|
|
|
+ .ns_buffer (NOLOAD):
|
|
|
+ {
|
|
|
+ /* Allocate RAM on a 32-byte boundary to help with placement of Ethernet buffers. */
|
|
|
+ . = __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_START & 0xFFFFFFE0) : .;
|
|
|
+
|
|
|
+ KEEP(*(.ns_buffer*))
|
|
|
+ } > RAM
|
|
|
+
|
|
|
+ /* Data flash. */
|
|
|
+ .data_flash :
|
|
|
+ {
|
|
|
+ . = ORIGIN(DATA_FLASH);
|
|
|
+ __tz_DATA_FLASH_S = .;
|
|
|
+ __Data_Flash_Start = .;
|
|
|
+ KEEP(*(.data_flash*))
|
|
|
+ __Data_Flash_End = .;
|
|
|
+
|
|
|
+ __tz_DATA_FLASH_N = DEFINED(DATA_FLASH_NS_START) ? ABSOLUTE(DATA_FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(DATA_FLASH_START + DATA_FLASH_LENGTH) : ALIGN(1024);
|
|
|
+ } > DATA_FLASH
|
|
|
+
|
|
|
+ /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */
|
|
|
+ __tz_SDRAM_S = ORIGIN(SDRAM);
|
|
|
+
|
|
|
+ /* SDRAM */
|
|
|
+ .sdram (NOLOAD):
|
|
|
+ {
|
|
|
+ __SDRAM_Start = .;
|
|
|
+ KEEP(*(.sdram*))
|
|
|
+ KEEP(*(.frame*))
|
|
|
+ __SDRAM_End = .;
|
|
|
+ } > SDRAM
|
|
|
+
|
|
|
+ /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */
|
|
|
+ __tz_SDRAM_N = __SDRAM_End;
|
|
|
+
|
|
|
+ /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. */
|
|
|
+ __tz_ID_CODE_S = ORIGIN(ID_CODE);
|
|
|
+
|
|
|
+ .id_code :
|
|
|
+ {
|
|
|
+ __ID_Code_Start = .;
|
|
|
+ KEEP(*(.id_code*))
|
|
|
+ __ID_Code_End = .;
|
|
|
+ } > ID_CODE
|
|
|
+
|
|
|
+ /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. */
|
|
|
+ __tz_ID_CODE_N = __ID_Code_End;
|
|
|
+
|
|
|
+ /* Symbol required for RA Configuration tool. */
|
|
|
+ __tz_OPTION_SETTING_S = ORIGIN(OPTION_SETTING);
|
|
|
+
|
|
|
+ .option_setting :
|
|
|
+ {
|
|
|
+ __OPTION_SETTING_Start = .;
|
|
|
+ KEEP(*(.option_setting_ofs0))
|
|
|
+ . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_Start + 0x10 : __OPTION_SETTING_Start;
|
|
|
+ KEEP(*(.option_setting_dualsel))
|
|
|
+ . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_Start + 0x34 : __OPTION_SETTING_Start;
|
|
|
+ KEEP(*(.option_setting_sas))
|
|
|
+ __OPTION_SETTING_End = .;
|
|
|
+ } > OPTION_SETTING = 0xFF
|
|
|
+
|
|
|
+ /* Symbol required for RA Configuration tool. */
|
|
|
+ __tz_OPTION_SETTING_N = OPTION_SETTING_START_NS;
|
|
|
+
|
|
|
+ .option_setting_ns :
|
|
|
+ {
|
|
|
+ __OPTION_SETTING_NS_Start = .;
|
|
|
+ KEEP(*(.option_setting_ofs1))
|
|
|
+ . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x10 : __OPTION_SETTING_NS_Start;
|
|
|
+ KEEP(*(.option_setting_banksel))
|
|
|
+ . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x40 : __OPTION_SETTING_NS_Start;
|
|
|
+ KEEP(*(.option_setting_bps0))
|
|
|
+ . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x44 : __OPTION_SETTING_NS_Start;
|
|
|
+ KEEP(*(.option_setting_bps1))
|
|
|
+ . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x48 : __OPTION_SETTING_NS_Start;
|
|
|
+ KEEP(*(.option_setting_bps2))
|
|
|
+ . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x60 : __OPTION_SETTING_NS_Start;
|
|
|
+ KEEP(*(.option_setting_pbps0))
|
|
|
+ . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x64 : __OPTION_SETTING_NS_Start;
|
|
|
+ KEEP(*(.option_setting_pbps1))
|
|
|
+ . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x68 : __OPTION_SETTING_NS_Start;
|
|
|
+ KEEP(*(.option_setting_pbps2))
|
|
|
+ __OPTION_SETTING_NS_End = .;
|
|
|
+ } > OPTION_SETTING = 0xFF
|
|
|
+
|
|
|
+ /* Symbol required for RA Configuration tool. */
|
|
|
+ __tz_OPTION_SETTING_S_S = ORIGIN(OPTION_SETTING_S);
|
|
|
+
|
|
|
+ .option_setting_s :
|
|
|
+ {
|
|
|
+ __OPTION_SETTING_S_Start = .;
|
|
|
+ KEEP(*(.option_setting_ofs1_sec))
|
|
|
+ . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x10 : __OPTION_SETTING_S_Start;
|
|
|
+ KEEP(*(.option_setting_banksel_sec))
|
|
|
+ . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x40 : __OPTION_SETTING_S_Start;
|
|
|
+ KEEP(*(.option_setting_bps_sec0))
|
|
|
+ . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x44 : __OPTION_SETTING_S_Start;
|
|
|
+ KEEP(*(.option_setting_bps_sec1))
|
|
|
+ . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x48 : __OPTION_SETTING_S_Start;
|
|
|
+ KEEP(*(.option_setting_bps_sec2))
|
|
|
+ . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x60 : __OPTION_SETTING_S_Start;
|
|
|
+ KEEP(*(.option_setting_pbps_sec0))
|
|
|
+ . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x64 : __OPTION_SETTING_S_Start;
|
|
|
+ KEEP(*(.option_setting_pbps_sec1))
|
|
|
+ . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x68 : __OPTION_SETTING_S_Start;
|
|
|
+ KEEP(*(.option_setting_pbps_sec2))
|
|
|
+ . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x80 : __OPTION_SETTING_S_Start;
|
|
|
+ KEEP(*(.option_setting_ofs1_sel))
|
|
|
+ . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x90 : __OPTION_SETTING_S_Start;
|
|
|
+ KEEP(*(.option_setting_banksel_sel))
|
|
|
+ . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC0 : __OPTION_SETTING_S_Start;
|
|
|
+ KEEP(*(.option_setting_bps_sel0))
|
|
|
+ . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC4 : __OPTION_SETTING_S_Start;
|
|
|
+ KEEP(*(.option_setting_bps_sel1))
|
|
|
+ . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC8 : __OPTION_SETTING_S_Start;
|
|
|
+ KEEP(*(.option_setting_bps_sel2))
|
|
|
+ __OPTION_SETTING_S_End = .;
|
|
|
+ } > OPTION_SETTING_S = 0xFF
|
|
|
+
|
|
|
+ /* Symbol required for RA Configuration tool. */
|
|
|
+ __tz_OPTION_SETTING_S_N = __OPTION_SETTING_S_End;
|
|
|
+}
|
Rbb666