[bsp][stm32] Standardize the pin configuration

bsp/stm32/stm32f411-weact-blackpill/applications/arduino_pinout/README.md

@@ -23,12 +23,12 @@ Hardware Drivers Config --->
 | Arduino引脚编号  | STM32引脚编号 | 5V容忍 | 备注  |
 | ------------------- | --------- | ---- | ------------------------------------------------------------------------- |
 | 0 (D0) | PC13 | 是 | 板载用户LED |
-| 1 (D1) | PC14 | 是 | I2C1-SDA，默认被RT-Thread的I2C设备框架i2c1接管 |
-| 2 (D2) | PC15 | 是 | I2C1-SCL，默认被RT-Thread的I2C设备框架i2c1接管 |
+| 1 (D1) | PC14 | 是 | |
+| 2 (D2) | PC15 | 是 | |
 | 3 (D3) | PA2 | 是 | Serial2-TX，默认被RT-Thread的UART设备框架uart2接管 |
 | 4 (D4) | PA3 | 是 | Serial2-RX，默认被RT-Thread的UART设备框架uart2接管 |
-| 5 (D5) | PB2 | 是 |  |
-| 6 (D6) | PB10 | 是 |  |
+| 5 (D5) | PB2 | 是 | I2C1-SDA，默认被RT-Thread的I2C设备框架i2c1接管 |
+| 6 (D6) | PB10 | 是 | I2C1-SCL，默认被RT-Thread的I2C设备框架i2c1接管 |
 | 7 (D7) | PB9 | 是 | PWM4-CH4，默认被RT-Thread的PWM设备框架pwm4接管 |
 | 8 (D8) | PB8 | 是 | PWM4-CH3，默认被RT-Thread的PWM设备框架pwm4接管 |
 | 9 (D9) | PB7 | 是 | PWM4-CH2，默认被RT-Thread的PWM设备框架pwm4接管 |

bsp/stm32/stm32f411-weact-blackpill/applications/arduino_pinout/pins_arduino.c

@@ -22,12 +22,12 @@
 const pin_map_t pin_map_table[]=
 {
     {D0, GET_PIN(C,13)},                /* LED_BUILTIN */
-    {D1, GET_PIN(C,14), "i2c1"},        /* I2C-SDA (Wire) */
-    {D2, GET_PIN(C,15), "i2c1"},        /* I2C-SCL (Wire) */
+    {D1, GET_PIN(C,14)},
+    {D2, GET_PIN(C,15)},
     {D3, GET_PIN(A,2), "uart2"},        /* Serial-TX */
     {D4, GET_PIN(A,3), "uart2"},        /* Serial-RX */
-    {D5, GET_PIN(B,2)},
-    {D6, GET_PIN(B,10)},
+    {D5, GET_PIN(B,2), "i2c1"},         /* I2C-SDA (Wire) */
+    {D6, GET_PIN(B,10), "i2c1"},        /* I2C-SCL (Wire) */
     {D7, GET_PIN(B,9), "pwm4", 4},      /* PWM */
     {D8, GET_PIN(B,8), "pwm4", 3},      /* PWM */
     {D9, GET_PIN(B,7), "pwm4", 2},      /* PWM */

bsp/stm32/stm32f411-weact-blackpill/applications/arduino_pinout/pins_arduino.h

@@ -57,7 +57,7 @@
 #define SS      D14  /* Chip select pin of default spi */
 #define RTDUINO_DEFAULT_SPI_BUS_NAME      "spi1"
 
-/* i2c1 : PC14-SDA PC15-SCL */
+/* i2c1 : PB2-SDA PB10-SCL */
 #define RTDUINO_DEFAULT_IIC_BUS_NAME    "i2c1"
 
 /* Serial2 - PA2-TX  PA3-RX */

bsp/stm32/stm32f411-weact-blackpill/board/CubeMX_Config/CubeMX_Config.ioc

@@ -5,6 +5,9 @@ ADC1.NbrOfConversionFlag=1
 ADC1.Rank-0\#ChannelRegularConversion=1
 ADC1.SamplingTime-0\#ChannelRegularConversion=ADC_SAMPLETIME_3CYCLES
 ADC1.master=1
+CAD.formats=
+CAD.pinconfig=
+CAD.provider=
 File.Version=6
 GPIO.groupedBy=Group By Peripherals
 KeepUserPlacement=false
@@ -72,17 +75,17 @@ Mcu.UserConstants=
 Mcu.UserName=STM32F411CEUx
 MxCube.Version=6.5.0
 MxDb.Version=DB.6.0.50
-NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:true
-NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:true
+NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
+NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
 NVIC.ForceEnableDMAVector=true
-NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:true
-NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:true
-NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:true
-NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:true
+NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
+NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
+NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
+NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
 NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
-NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:true
-NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:true
-NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:true
+NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
+NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:false
+NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
 PA0-WKUP.Locked=true
 PA0-WKUP.Signal=ADCx_IN0
 PA1.Locked=true
@@ -182,12 +185,15 @@ ProjectManager.PreviousToolchain=
 ProjectManager.ProjectBuild=false
 ProjectManager.ProjectFileName=CubeMX_Config.ioc
 ProjectManager.ProjectName=CubeMX_Config
+ProjectManager.ProjectStructure=
 ProjectManager.RegisterCallBack=
 ProjectManager.StackSize=0x400
 ProjectManager.TargetToolchain=MDK-ARM V5
 ProjectManager.ToolChainLocation=
+ProjectManager.UAScriptAfterPath=
+ProjectManager.UAScriptBeforePath=
 ProjectManager.UnderRoot=false
-ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART1_UART_Init-USART1-false-HAL-true,4-MX_RTC_Init-RTC-false-HAL-true,5-MX_TIM10_Init-TIM10-false-HAL-true,6-MX_TIM11_Init-TIM11-false-HAL-true,7-MX_USB_OTG_FS_PCD_Init-USB_OTG_FS-false-HAL-true,8-MX_ADC1_Init-ADC1-false-HAL-true,9-MX_TIM1_Init-TIM1-false-HAL-true,10-MX_TIM4_Init-TIM4-false-HAL-true,11-MX_USART2_UART_Init-USART2-false-HAL-true
+ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART1_UART_Init-USART1-false-HAL-true,4-MX_RTC_Init-RTC-false-HAL-true,5-MX_TIM10_Init-TIM10-false-HAL-true,6-MX_TIM11_Init-TIM11-false-HAL-true,7-MX_USB_OTG_FS_PCD_Init-USB_OTG_FS-false-HAL-true,8-MX_ADC1_Init-ADC1-false-HAL-true,9-MX_TIM1_Init-TIM1-false-HAL-true,10-MX_TIM4_Init-TIM4-false-HAL-true,11-MX_USART2_UART_Init-USART2-false-HAL-true,12-MX_SPI1_Init-SPI1-false-HAL-true
 RCC.48MHZClocksFreq_Value=48000000
 RCC.AHBFreq_Value=60000000
 RCC.APB1CLKDivider=RCC_HCLK_DIV2

bsp/stm32/stm32f411-weact-blackpill/board/Kconfig

@@ -4,8 +4,8 @@ menu "Onboard Peripheral Drivers"
     config BSP_USING_ARDUINO
         bool "Compatible with Arduino Ecosystem (RTduino)"
         select PKG_USING_RTDUINO
-        select BSP_USING_USART1
-        select BSP_USING_USART2
+        select BSP_USING_UART1
+        select BSP_USING_UART2
         select BSP_USING_GPIO
         select BSP_USING_ADC
         select BSP_USING_ADC1
@@ -79,15 +79,15 @@ menu "On-chip Peripheral Drivers"
         select RT_USING_I2C_BITOPS
         select RT_USING_PIN
         if BSP_USING_I2C1
-            comment "Notice: PC14 --> 46; PC15 --> 47"
+            comment "Notice: PB2 --> 18; PB10 --> 26"
             config BSP_I2C1_SCL_PIN
                 int "i2c1 scl pin number"
                 range 0 48
-                default 47
+                default 26
             config BSP_I2C1_SDA_PIN
                 int "I2C1 sda pin number"
                 range 0 48
-                default 46
+                default 18
         endif
 
      menuconfig BSP_USING_PWM