Merge pull request #2095 from greedyhao/master

[bsp] [stm32] 修改f7系列DMA时钟 添加SD卡适配

bsp/stm32/libraries/HAL_Drivers/config/f7/pwm_config.h

@@ -0,0 +1,60 @@
+/*
+ * Copyright (c) 2006-2018, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-12-13     zylx         first version
+ */
+
+#ifndef __PWM_CONFIG_H__
+#define __PWM_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef BSP_USING_PWM2
+#ifndef PWM2_CONFIG
+#define PWM2_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM2,         \
+       .name                    = "pwm2",       \
+       .channel                 = 0             \
+    }
+#endif /* PWM2_CONFIG */
+#endif /* BSP_USING_PWM2 */
+
+#ifdef BSP_USING_PWM3
+#ifndef PWM3_CONFIG
+#define PWM3_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM3,         \
+       .name                    = "pwm3",       \
+       .channel                 = 0             \
+    }
+#endif /* PWM3_CONFIG */
+#endif /* BSP_USING_PWM3 */
+
+#ifdef BSP_USING_PWM4
+#ifndef PWM4_CONFIG
+#define PWM4_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM4,         \
+       .name                    = "pwm4",       \
+       .channel                 = 0             \
+    }
+#endif /* PWM4_CONFIG */
+#endif /* BSP_USING_PWM4 */
+
+#ifdef BSP_USING_PWM5
+#ifndef PWM5_CONFIG
+#define PWM5_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM5,         \
+       .name                    = "pwm5",       \
+       .channel                 = 0             \
+    }
+#endif /* PWM5_CONFIG */
+#endif /* BSP_USING_PWM5 */
+
+#endif /* __PWM_CONFIG_H__ */

bsp/stm32/libraries/HAL_Drivers/config/f7/sdio_config.h

@@ -0,0 +1,38 @@
+/*
+ * Copyright (c) 2006-2018, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-12-13     BalanceTWK   first version
+ */
+
+#ifndef __SDIO_CONFIG_H__
+#define __SDIO_CONFIG_H__
+
+#include <rtthread.h>
+#include "stm32f7xx_hal.h"
+
+#ifdef BSP_USING_SDIO
+#define SDIO_BUS_CONFIG                                  \
+    {                                                    \
+        .Instance = SDMMC1,                              \
+        .dma_rx.dma_rcc = RCC_AHB1ENR_DMA2EN,            \
+        .dma_tx.dma_rcc = RCC_AHB1ENR_DMA2EN,            \
+        .dma_rx.Instance = DMA2_Stream3,                 \
+        .dma_rx.channel = DMA_CHANNEL_4,                 \
+        .dma_rx.dma_irq = DMA2_Stream3_IRQn,             \
+        .dma_tx.Instance = DMA2_Stream6,                 \
+        .dma_tx.channel = DMA_CHANNEL_4,                 \
+        .dma_tx.dma_irq = DMA2_Stream6_IRQn,             \
+    }
+
+#define SPI1_DMA_RX_IRQHandler           DMA2_Stream3_IRQHandler
+#define SPI1_DMA_TX_IRQHandler           DMA2_Stream6_IRQHandler
+#endif
+
+#endif /*__SDIO_CONFIG_H__ */
+
+
+

bsp/stm32/libraries/HAL_Drivers/config/f7/tim_config.h

@@ -0,0 +1,59 @@
+/*
+ * Copyright (c) 2006-2018, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-12-11     zylx         first version
+ */
+
+#ifndef __TIM_CONFIG_H__
+#define __TIM_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifndef TIM_DEV_INFO_CONFIG
+#define TIM_DEV_INFO_CONFIG                     \
+    {                                           \
+        .maxfreq = 1000000,                     \
+        .minfreq = 3000,                        \
+        .maxcnt  = 0xFFFF,                      \
+        .cntmode = HWTIMER_CNTMODE_UP,          \
+    }
+#endif /* TIM_DEV_INFO_CONFIG */
+
+#ifdef BSP_USING_TIM11
+#ifndef TIM11_CONFIG
+#define TIM11_CONFIG                                        \
+    {                                                       \
+       .tim_handle.Instance     = TIM11,                    \
+       .tim_irqn                = TIM1_TRG_COM_TIM11_IRQn,  \
+       .name                    = "timer11",                \
+    }
+#endif /* TIM11_CONFIG */
+#endif /* BSP_USING_TIM11 */
+
+#ifdef BSP_USING_TIM13
+#ifndef TIM13_CONFIG
+#define TIM13_CONFIG                                        \
+    {                                                       \
+       .tim_handle.Instance     = TIM13,                    \
+       .tim_irqn                = TIM8_UP_TIM13_IRQn,       \
+       .name                    = "timer13",                \
+    }
+#endif /* TIM13_CONFIG */
+#endif /* BSP_USING_TIM13 */
+
+#ifdef BSP_USING_TIM14
+#ifndef TIM14_CONFIG
+#define TIM14_CONFIG                                        \
+    {                                                       \
+       .tim_handle.Instance     = TIM14,                    \
+       .tim_irqn                = TIM8_TRG_COM_TIM14_IRQn,  \
+       .name                    = "timer14",                \
+    }
+#endif /* TIM14_CONFIG */
+#endif /* BSP_USING_TIM14 */
+
+#endif /* __TIM_CONFIG_H__ */

bsp/stm32/libraries/HAL_Drivers/drv_config.h

@@ -32,6 +32,9 @@
 #include "f7/uart_config.h"
 #include "f7/spi_config.h"
 #include "f7/adc_config.h"
+#include "f7/tim_config.h"
+#include "f7/sdio_config.h"
+#include "f7/pwm_config.h"
 #elif  defined(SOC_SERIES_STM32L4)
 #include "l4/uart_config.h"
 #include "l4/spi_config.h"

bsp/stm32/libraries/HAL_Drivers/drv_sdio.c

@@ -19,6 +19,12 @@
 #define LOG_TAG             "drv.sdio"
 #include <drv_log.h>
 
+#if defined(SOC_SERIES_STM32F1) || defined(SOC_SERIES_STM32F4)
+#define SDCARD_INSTANCE                   SDIO
+#elif defined(SOC_SERIES_STM32L4) || defined(SOC_SERIES_STM32F7)
+#define SDCARD_INSTANCE                   SDMMC1
+#endif /*  defined(SOC_SERIES_STM32F1) || defined(SOC_SERIES_STM32F4) */
+
 static struct stm32_sdio_config sdio_config = SDIO_BUS_CONFIG;
 static struct stm32_sdio_class sdio_obj;
 static struct rt_mmcsd_host *host;
@@ -809,14 +815,14 @@ int rt_hw_sdio_init(void)
 {
     struct stm32_sdio_des sdio_des;
     SD_HandleTypeDef hsd;
-    hsd.Instance = SDIO;
+    hsd.Instance = SDCARD_INSTANCE;
     {
         rt_uint32_t tmpreg = 0x00U;
 #if defined(SOC_SERIES_STM32F1)
         /* enable DMA clock && Delay after an RCC peripheral clock enabling*/
         SET_BIT(RCC->AHBENR, sdio_config.dma_rx.dma_rcc);
         tmpreg = READ_BIT(RCC->AHBENR, sdio_config.dma_rx.dma_rcc);
-#elif defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32L4)
+#elif defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7) || defined(SOC_SERIES_STM32L4)
         SET_BIT(RCC->AHB1ENR, sdio_config.dma_rx.dma_rcc);
         /* Delay after an RCC peripheral clock enabling */
         tmpreg = READ_BIT(RCC->AHB1ENR, sdio_config.dma_rx.dma_rcc);
@@ -828,7 +834,7 @@ int rt_hw_sdio_init(void)
     HAL_SD_MspInit(&hsd);
 
     sdio_des.clk_get = stm32_sdio_clock_get;
-    sdio_des.hw_sdio = (struct stm32_sdio *)SDIO;
+    sdio_des.hw_sdio = (struct stm32_sdio *)SDCARD_INSTANCE;
     sdio_des.rxconfig = DMA_RxConfig;
     sdio_des.txconfig = DMA_TxConfig;
 

bsp/stm32/libraries/HAL_Drivers/drv_sdio.h

@@ -19,6 +19,12 @@
 #include <drivers/mmcsd_core.h>
 #include <drivers/sdio.h>
 
+#if defined(SOC_SERIES_STM32F1) || defined(SOC_SERIES_STM32F4)
+#define SDCARD_INSTANCE_TYPE              SDIO_TypeDef
+#elif defined(SOC_SERIES_STM32L4) || defined(SOC_SERIES_STM32F7)
+#define SDCARD_INSTANCE_TYPE              SDMMC_TypeDef
+#endif /*  defined(SOC_SERIES_STM32F1) || defined(SOC_SERIES_STM32F4) */
+
 #define SDIO_BUFF_SIZE       4096
 #define SDIO_MAX_FREQ        2000000
 #define SDIO_ALIGN_LEN       32
@@ -158,7 +164,7 @@ struct stm32_sdio_des
 
 struct stm32_sdio_config
 {
-    SDIO_TypeDef *Instance;
+    SDCARD_INSTANCE_TYPE *Instance;
     struct dma_config dma_rx, dma_tx;
 };
 

bsp/stm32/libraries/HAL_Drivers/drv_spi.c

@@ -484,7 +484,7 @@ static int rt_hw_spi_bus_init(void)
             /* enable DMA clock && Delay after an RCC peripheral clock enabling*/
             SET_BIT(RCC->AHBENR, spi_config[i].dma_rx.dma_rcc);
             tmpreg = READ_BIT(RCC->AHBENR, spi_config[i].dma_rx.dma_rcc);
-#elif defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32L4) 
+#elif defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7) || defined(SOC_SERIES_STM32L4) 
             SET_BIT(RCC->AHB1ENR, spi_config[i].dma_rx.dma_rcc);
             /* Delay after an RCC peripheral clock enabling */
             tmpreg = READ_BIT(RCC->AHB1ENR, spi_config[i].dma_rx.dma_rcc);
@@ -757,5 +757,5 @@ int rt_hw_spi_init(void)
 }
 INIT_BOARD_EXPORT(rt_hw_spi_init);
 
-#endif /* BSP_USING_SPI1 || BSP_USING_SPI2 || BSP_USING_SPI3 || BSP_USING_SPI4 || BSP_USING_SPI5 */
+#endif /* BSP_USING_SPI1 || BSP_USING_SPI2 || BSP_USING_SPI3 || BSP_USING_SPI4 || BSP_USING_SPI5 || BSP_USING_SPI6 */
 #endif /* RT_USING_SPI */

bsp/stm32/libraries/STM32F7xx_HAL/SConscript

@@ -6,11 +6,95 @@ cwd = GetCurrentDir()
 
 # The set of source files associated with this SConscript file.
 
-src = Glob('STM32F7xx_HAL_Driver/Src/*.c')
-src += Split('''
+src = Split('''
 CMSIS/Device/ST/STM32F7xx/Source/Templates/system_stm32f7xx.c
+STM32F7xx_HAL_Driver/Src/stm32f7xx_hal.c
+STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cec.c
+STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cortex.c
+STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_crc.c
+STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cryp.c
+STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cryp_ex.c
+STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma.c
+STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma_ex.c
+STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr.c
+STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr_ex.c
+STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc.c
+STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc_ex.c
+STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rng.c
+STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_sram.c
 ''')
 
+if GetDepend(['RT_USING_PIN']):
+    src += ['STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_gpio.c']
+    
+if GetDepend(['RT_USING_SERIAL']):
+    src += ['STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_uart.c']
+    src += ['STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_usart.c']
+
+if GetDepend(['RT_USING_I2C']):
+    src += ['STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c.c']
+    src += ['STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c_ex.c']
+
+if GetDepend(['RT_USING_SPI']):
+    src += ['STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_spi.c']
+    src += ['STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_qspi.c']
+
+if GetDepend(['RT_USING_USB_HOST']) or GetDepend(['RT_USING_USB_DEVICE']):
+    src += ['STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pccard.c']
+    src += ['STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pcd.c'] 
+    src += ['STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pcd_ex.c']
+    src += ['STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_hcd.c']
+    src += ['STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_usb.c']
+
+if GetDepend(['RT_USING_CAN']):
+    src += ['STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_can.c']
+
+if GetDepend(['RT_USING_HWTIMER']) or GetDepend(['RT_USING_PWM']):
+    src += ['STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim.c']
+    src += ['STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim_ex.c']
+    src += ['STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_lptim.c']
+
+if GetDepend(['BSP_USING_ETH']):
+    src += ['STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_eth.c']
+
+if GetDepend(['RT_USING_ADC']):
+    src += ['STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_adc.c']
+    src += ['STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_adc_ex.c']
+
+if GetDepend(['RT_USING_RTC']):
+    src += ['STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rtc.c']
+    src += ['STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rtc_ex.c']
+
+if GetDepend(['RT_USING_WDT']):
+    src += ['STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_iwdg.c']
+    src += ['STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_wwdg.c']
+
+if GetDepend(['RT_USING_SDIO']):
+    src += ['STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_sdmmc.c']
+    src += ['STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_sd.c']
+
+if GetDepend(['RT_USING_AUDIO']):
+    src += ['STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2s.c']
+    src += ['STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2s_ex.c']
+    src += ['STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_sai.c']
+    src += ['STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_sai_ex.c']
+
+if GetDepend(['RT_USING_MTD_NOR']):
+    src += ['STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_nor.c']
+
+if GetDepend(['RT_USING_MTD_NAND']):
+    src += ['STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_nand.c']
+
+if GetDepend(['BSP_USING_SDRAM']):
+    src += ['STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_fmc.c']
+    src += ['STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_fsmc.c']
+    src += ['STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_sdram.c']
+
+if GetDepend(['BSP_USING_ON_CHIP_FLASH']):
+    src += ['STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash.c']
+    src += ['STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash_ex.c']
+    src += ['STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash_ramfunc.c']
+
 path = [cwd + '/STM32F7xx_HAL_Driver/Inc',
     cwd + '/CMSIS/Device/ST/STM32F7xx/Include',
     cwd + '/CMSIS/Include']

bsp/stm32/stm32f767-fire-challenger/README.md

@@ -44,7 +44,7 @@
 | QSPI Flash        |   支持    |                                       |
 | 电位器             |   支持     |     使用 ADC1                      |
 | 以太网            |   暂不支持    |           移植中                     |
-| MPU6050六轴传感器 |   支持     |              |
+| MPU6050六轴传感器 |   支持     |                           |
 | SDRAM             |     支持     |                                       |
 | SD卡              |   即将支持   |                           |
 | CAN               |   即将支持   |                               |
@@ -58,7 +58,7 @@
 | RTC               |     支持     |                                      |
 | WDT               |     支持     |                                       |
 | FLASH | 支持 | 已适配 [FAL](https://github.com/RT-Thread-packages/fal)  |
-| SDIO              |   暂不支持   | 即将支持                              |
+| SDIO              |    支持   |                                        |
 | PWM               |   暂不支持   | 即将支持                              |
 | USB Device        |   暂不支持   | 即将支持                              |
 | USB Host          |   暂不支持   | 即将支持                              |

bsp/stm32/stm32f767-fire-challenger/board/Kconfig

@@ -34,6 +34,40 @@ menu "Onboard Peripheral Drivers"
         select PKG_USING_MPU6XXX
         default n
 
+    config BSP_USING_ETH
+        bool "Enable Ethernet"
+        default n
+        select RT_USING_LWIP
+        if BSP_USING_ETH
+            config EXTERNAL_PHY_ADDRESS
+                hex
+                default 0x00
+        endif
+
+    config BSP_USING_RGB
+        bool "Enable RGB LED (timer5 channel1 - 3)"
+        select RT_USING_PWM
+        select BSP_USING_PWM
+        select BSP_USING_PWM5
+        select BSP_USING_PWM5_CH1
+        select BSP_USING_PWM5_CH2
+        select BSP_USING_PWM5_CH3
+        default n    
+
+    config BSP_USING_POT
+        bool "Enable potentiometer"
+        select BSP_USING_ADC
+        select BSP_USING_ADC1
+        default n
+
+    config BSP_USING_SDCARD
+        bool "Enable SDCARD (sdio)"
+        select BSP_USING_SDIO
+        select RT_USING_DFS
+        select RT_USING_DFS_ELMFAT
+        select RT_USING_PIN
+        default n
+
 endmenu
 
 menu "On-chip Peripheral Drivers"
@@ -90,6 +124,47 @@ menu "On-chip Peripheral Drivers"
         select RT_USING_QSPI
         select RT_USING_SPI
         default n
+
+    menuconfig BSP_USING_TIM
+        bool "Enable timer"
+        default n
+        select RT_USING_HWTIMER
+        if BSP_USING_TIM
+            config BSP_USING_TIM11
+                bool "Enable TIM11"
+                default n
+
+            config BSP_USING_TIM13
+                bool "Enable TIM13"
+                default n
+
+            config BSP_USING_TIM14
+                bool "Enable TIM14"
+                default n
+        endif
+
+    menuconfig BSP_USING_PWM
+        bool "Enable pwm"
+        default n
+        select RT_USING_PWM
+        if BSP_USING_PWM
+        menuconfig BSP_USING_PWM5
+            bool "Enable timer5 output pwm"
+            default n
+            if BSP_USING_PWM5
+                config BSP_USING_PWM5_CH1
+                    bool "Enable PWM5 channel1"
+                    default n
+
+                config BSP_USING_PWM5_CH2
+                    bool "Enable PWM5 channel2"
+                    default n
+
+                config BSP_USING_PWM5_CH3
+                    bool "Enable PWM5 channel3"
+                    default n
+            endif
+        endif
         
     menuconfig BSP_USING_ADC
         bool "Enable ADC"
@@ -109,24 +184,6 @@ menu "On-chip Peripheral Drivers"
                 default n
         endif
 
-    menuconfig BSP_USING_I2C1
-        bool "Enable I2C1 BUS (software simulation)"
-        default n
-        select RT_USING_I2C
-        select RT_USING_I2C_BITOPS
-        select RT_USING_PIN
-        if BSP_USING_I2C1
-            comment "Notice: PB6 --> 22; PB7 --> 23" 
-            config BSP_I2C1_SCL_PIN
-                int "I2C1 scl pin number"
-                range 1 176
-                default 22
-            config BSP_I2C1_SDA_PIN
-                int "I2C1 sda pin number"
-                range 1 176
-                default 23
-        endif
-
     menuconfig BSP_USING_I2C2
         bool "Enable I2C2 BUS (software simulation)"
         default n
@@ -134,33 +191,15 @@ menu "On-chip Peripheral Drivers"
         select RT_USING_I2C_BITOPS
         select RT_USING_PIN
         if BSP_USING_I2C2
-            comment "Notice: PC15 --> 47; PD0 --> 48"
+            comment "Notice: PH4 --> 116; PH5 --> 117"
             config BSP_I2C2_SCL_PIN
                 int "i2c2 scl pin number"
                 range 1 176
-                default 47
+                default 116
             config BSP_I2C2_SDA_PIN
                 int "I2C2 sda pin number"
                 range 1 176
-                default 48
-        endif
-
-    menuconfig BSP_USING_I2C3
-        bool "Enable I2C3 BUS (software simulation)"
-        default n
-        select RT_USING_I2C
-        select RT_USING_I2C_BITOPS
-        select RT_USING_PIN
-        if BSP_USING_I2C3
-            comment "Notice: PF12 --> 92; PF13 --> 93"
-            config BSP_I2C3_SCL_PIN
-                int "i2c3 scl pin number"
-                range 1 176
-                default 92
-            config BSP_I2C3_SDA_PIN
-                int "I2C3 sda pin number"
-                range 1 176
-                default 93
+                default 117
         endif
 
     menuconfig BSP_USING_I2C4
@@ -192,6 +231,12 @@ menu "On-chip Peripheral Drivers"
         select RT_USING_WDT
         default n
 
+    config BSP_USING_SDIO
+        bool "Enable SDIO"
+        select RT_USING_SDIO
+        select RT_USING_DFS
+        default n
+        
 endmenu
 
 menu "Board extended module Drivers"

bsp/stm32/stm32f767-fire-challenger/board/SConscript

@@ -18,6 +18,9 @@ if GetDepend(['BSP_USING_ETH']):
 if GetDepend(['BSP_USING_QSPI_FLASH']):
     src += Glob('ports/drv_qspi_flash.c')
 
+if GetDepend(['BSP_USING_SDCARD']):
+    src += Glob('ports/sdcard_port.c')
+
 path =  [cwd]
 path += [cwd + '/CubeMX_Config/Inc']
 path += [cwd + '/ports']

bsp/stm32/stm32f767-fire-challenger/board/ports/sdcard_port.c

@@ -0,0 +1,76 @@
+/*
+ * Copyright (c) 2006-2018, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-12-13     balanceTWK   add sdcard port file
+ */
+
+#include <rtthread.h>
+
+#ifdef BSP_USING_SDCARD
+
+#include <dfs_elm.h>
+#include <dfs_fs.h>
+#include <dfs_posix.h>
+#include "drv_gpio.h"
+
+#define DBG_ENABLE
+#define DBG_SECTION_NAME  "app.card"
+#define DBG_COLOR
+
+#define DBG_LEVEL DBG_INFO
+#include <rtdbg.h>
+
+#define WIFI_RESET_PIN                 GET_PIN(G,  9)
+
+int ewm1062_disable(void)
+{
+    rt_pin_mode(WIFI_RESET_PIN, PIN_MODE_OUTPUT);
+    rt_pin_write(WIFI_RESET_PIN,PIN_LOW);
+    return RT_EOK;
+}
+INIT_BOARD_EXPORT(ewm1062_disable);
+
+void sd_mount(void *parameter)
+{
+    while (1)
+    {
+        rt_thread_mdelay(500);
+        if(rt_device_find("sd0") != RT_NULL)
+        {
+            if (dfs_mount("sd0", "/", "elm", 0, 0) == RT_EOK)
+            {
+                LOG_I("sd card mount to '/'");
+                break;
+            }
+            else
+            {
+                LOG_W("sd card mount to '/' failed!");
+            }
+        }
+    }
+}
+
+int stm32_sdcard_mount(void)
+{
+    rt_thread_t tid;
+
+    tid = rt_thread_create("sd_mount", sd_mount, RT_NULL,
+                           1024, RT_THREAD_PRIORITY_MAX - 2, 20);
+    if (tid != RT_NULL)
+    {
+        rt_thread_startup(tid);
+    }
+    else
+    {
+        LOG_E("create sd_mount thread err!");
+    }
+    return RT_EOK;
+}
+INIT_APP_EXPORT(stm32_sdcard_mount);
+
+#endif /* BSP_USING_SDCARD */
+